• Horticultural Science & Technology
• /
• v.31 no.2
• /
• pp.173-178
• /
• 2013

Experiments were conducted to investigate the optimum concentration of nutrient solution for strawberry 'Maehyang' bred domestically for exportation in hydroponics. Nutrient solutions for strawberry, which was made by Yamazaki, were supplied electrical conductivity (EC) 0.6, 0.8, 1.2, and $1.8dS{\cdot}m^{-1}$ after planting on cocopeat medium during the experiment period. Growth of shoot of strawberries did not show any statistical differences among treatments. Fruit length showed the longest in EC 0.8 and $1.2dS{\cdot}m^{-1}$, followed by 0.6 and $1.8dS{\cdot}m^{-1}$ in the first and third cluster. It showed the shortest in EC $1.8dS{\cdot}m^{-1}$ in the second cluster but there were no significant differences among treatments in the fourth cluster. Fruit diameter did not show significant differences among treatments in the first and second cluster but was the longest in the lowest concentration EC $0.6dS{\cdot}m^{-1}$ in the third cluster. The shortest was in EC $1.8dS{\cdot}m^{-1}$ in the fourth cluster. The heaviest mean fruit weight appeared in EC 0.8 and $1.2dS{\cdot}m^{-1}$, and the lightest was in EC $1.8dS{\cdot}m^{-1}$ in the first cluster and also lightest in EC $1.8dS{\cdot}m^{-1}$ but no significant differences was found among other treatments in the second & third cluster. Also the fruit weight was significantly light in plants grown in EC $1.8dS{\cdot}m^{-1}$ than $0.6dS{\cdot}m^{-1}$ in the fourth cluster. Soluble solids content of fruit was the highest in EC $0.6dS{\cdot}m^{-1}$ in all cluster. As a result, we came to the conclusion that the optimum EC for strawberry 'Maehyang' was EC 0.8 - $1.2dS{\cdot}m^{-1}$ during low temperature season. This result will be utilized as an indicator for strawberry hydroponics.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.321-338
• /
• 1996

The purpose of this study was to evaluate the effect of moistening and air-drying of acid conditioned dentin and enamel on the marginal microleakage. In this study, Class V cavity were prepared on both buccal and lingual surface of sixty extracted human premolars with cementum margin. These specimens were randomly devided into three groups and three dentin adhesives(Scotchbond Multi-Purpose, All bond 2, Prisma Universal Bond 3) were applied to each group. The specimens in each group were subdevided into four groups (Wet/primed, Dry/primed, Wet/not primed, Dry/not primed) and the etched dentin and enamel surface were treated these four surface treatments prior to the placement of a bonding agent or adhesive. Wet/primed group was simply blot-dried with a damp facial tissue before primer placement ; Dry/primed group was air dried for 30 seconds before the placement of a primer ; Wet/not primed group and Dry/not primed group were not primed after blot dried and air dried for 30 seconds each group. The bonding agent and composite resin were applied for each group. All specimens were exposed to 500 cycle of thermal stress. Specimens were placed in a silver nitrate solution and then sectioned buccolingually through the center of the restoration. The dye penetrations of the specimens were observed with a stereo microscope. The statistical test were applied to the results using a one way analysis variance (ANOVA) and Duncan's multiple range test. The aspects of silver ion penetration into the resin/dentin interface were examined under scanning electron microscopy. The results were as follows. 1. In all groups, the enamel margin showed significantly lower leakage value than the cementum margin (p<0.05). 2. Regardless of various surface treatment and dentin adhesives, there was no significant difference at the enamel margins (p>0.05). 3. At the dentin margins, the leakage values of Dry/not primed group showed significantly higher than that of the other groups (p<0.05). The leakage values of Wet/primed group showed significantly lower than that of the other groups, but, there was no significant difference between Wet group and Dry group. 4. There was no significantly difference between the dentin adhesives regarding the surface treatments in all groups(p>0.05). 5. On the backscatterd scanning electron microscopy observation, the penetration of the silver ion occured at the bonding resin/dentin interface. In the Wet/primed group, resindentin hybrid zone and resin penetration into the dentin was observed. The resin tags were compactively formed to a thickness of $3\sim4{\mu}m$ at the upper part of dentinal tubules. In the Dry/primed group, the thickness of the hybrid zone and the diameter, depth of the resin tags diminished. In the Non-primed groups, the hybrid zone was not identified and few resin tag was observed. There was the gap formation in the resin/dentin interface.

• The Journal of Korean Medicine
• /
• v.39 no.3
• /
• pp.61-72
• /
• 2018

Objectives: This study conducted a survey research to characterize traffic accident(TA) patients seeking Korean medicine treatment and to analyze the symptom improvement and satisfaction scores. Methods: A survey was conducted in 122 outpatients, who visited OO University Korean Hospital due to TA-associated symptoms from November, 2017 to May, 2018. The questionnaire included information on patient demographic characteristics, accident circumstance details, pain levels, reason for treatment selection, treatment methods, treatment purpose, symptom improvement and satisfaction. All statistical analyses were performed using Windows SPSS version 20.0 Results: The characteristics of traffic accident patients using Korean medical institution were usually accidents that occurred while driving slowly, and minor injuries like a sprain. The most important consideration in choosing Korean medical institution was its past experience. The biggest reason for switching treatment from Western medicine to Korean medicine was for diverse treatments. Satisfaction with Korean medicine was measured between very satisfaction and satisfaction. Patients showed the highest satisfaction with acupuncture, followed by pharmacopuncture and chuna manual therapy. Most treatments were measured between very satisfaction and satisfaction. After treatment, 95.90 percent of the patients said they would recommend Korean treatment. Conclusions: Although this study has limitations as research in survey format, we intended to analyze determining factors for the use of Korean medicine treatment through satisfaction, symptom improvement, and Numeric rating scale (NRS) change.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.485-493
• /
• 2013

PURPOSE. To evaluate the effects of surface treatments on shear bond strength (SBS) between microwave and conventionally sintered zirconia core/veneers. MATERIALS AND METHODS. 96 disc shaped Noritake Alliance zirconia specimens were fabricated using YenaDent CAM unit and were divided in 2 groups with respect to microwave or conventional methods (n=48/group). Surface roughness (Ra) evaluation was made with a profilometer on randomly selected microwave (n=10) and conventionally sintered (n=10) cores. Specimens were then assessed into 4 subgroups according to surface treatments applied (n=12/group). Groups for microwave (M) and conventionally (C) sintered core specimens were as follows; $M_C$,$C_C$: untreated (control group), $M_1,C_1:Al_2O_3$ sandblasting, $M_2,C_2$:liner, $M_3,C_3:Al_2O_3$ sandblasting followed by liner. Veneer ceramic was fired on zirconia cores and specimens were thermocycled (6000 cycles between $5^{\circ}-55^{\circ}C$). All specimens were subjected to SBS test using a universal testing machine at 0.5 mm/min, failure were evaluated under an optical microscope. Data were statistically analyzed using Shapiro Wilk, Levene, Post-hoc Tukey HSD and Student's t tests, Two-Way-Variance- Analysis and One-Way-Variance-Analysis (${\alpha}$=.05). RESULTS. Conventionally sintered specimens ($1.06{\pm}0.32{\mu}m$) showed rougher surfaces compared to microwave sintered ones ($0.76{\pm}0.32{\mu}m$)(P=.046), however, no correlation was found between SBS and surface roughness (r=-0.109, P=.658). The statistical comparison of the shear bond strengths of $C_3$ and $C_1$ group (P=.015); $C_C$ and $M_C$ group (P=.004) and $C_3$ and $M_3$ group presented statistically higher (P=.005) values. While adhesive failure was not seen in any of the groups, cohesive and combined patterns were seen in all groups. CONCLUSION. Based on the results of this in-vitro study, $Al_2O_{3-}$ sandblasting followed by liner application on conventionally sintered zirconia cores may be preferred to enhance bond strength.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.1
• /
• pp.17-25
• /
• 2003

Treatment with implants of single tooth missing cases is both functional and esthetic. Although the success rate of single-tooth implant treatments is increasing, sometimes it makes some problems. Problems with single-tooth implant treatments include soft tissue complications, abutment screw fracture, and most commonly, abutment screw loosening, and these involve the instability of the dental implant-superstructure interface. This study investigated and compared dental implant screw joint micromotion of various implant system with external connection or internal connection when tested under simulated clinical loading, Six groups (N=5) were assessed: (1) Branemark AurAdapt (Nobel Biocare, Goteborg, Sweden), (2) Branemark EsthetiCone (Nobel Biocare, Goteborg, Sweden), (3) Neoplant Conical (Neobiotec, Korea), (4) Neoplant UCLA (Neobiotec, Korea), (5) Neoplant 5.5mm Solid (Neobiotec, Korea), and (6) ITI SynOcta (Institute Straumann, Waldenburg, Switzerland). Six identical frameworks were fabricated. Abutment screws were tightened to 32-35 Ncm and occlusal screw were tightened to 15-20 Ncm with an electronic torque controller. A mechanical testing machine applied a compressive cyclic load of 20kg at 10Hz to a contact point on each implant crown. Strain gauge recorded the micromotion of the screw joint interface once a second. Data were selected at 1, 500, 5,000, 10,000, 20,000, 30,000, 40,000 and 50,000 cycle and 2-way ANOVA test was performed to assess the statistical significance. The results of this study were as follows; The micromotion of the implant-superstructure in the interface increased gradually through 50,000 cycles for all implant systems. In the case of the micromotion according to cycle increase, Neoplant Conical and Neoplant UCLA system exhibited significantly increasing micromotion at the implant-superstructure interface (p<0.05), but others not significant. In the case of the micromotion of the implant-superstructure interface at 50,000 cycle, the largest micromotion were recorded in the Branemark EsthetiCone, sequently followed by Neoplant Conical, Neoplant UCLA, Branemark AurAdapt, ITI SynOcta and Neplant Solid. Internal connection system showed smaller micromotion than external connection system. Specially, Neoplant Solid with internal connection system exhibited significantly smaller micromotion than other implant systems except ITI SynOcta with same internal connection system (p<0.05). In the case of external connection, Branemark EsthetiCone and Neoplant Conical system with abutment showed significantly larger micromotion than Branemark AurAdapt without abutment (p<0.05).

• Journal of Bio-Environment Control
• /
• v.12 no.4
• /
• pp.235-239
• /
• 2003

This study was carried out to investigate a adequate strength of nuttient solution in production of marjoram and oregano by hydroponicsl Two herbs were grown for 40days with the strength of 0.5, 1.0, 2.0, and 3.0 dS${\cdot}m^{-1}$ in herb's nutrient solution developed by European Vegetable R & D Center, Belgium. the growth, vitamin C, and essential oil content of marjormam were higher in the treatment of 0.5 dS${\cdot}m^{-1}$ than the other treatments tested. But marjoram growtn with the sstrength of 20. and 3.0 dS${\cdot}m^{-1}$ had the highest mineral contents and essential oil content, respectively. Elevated strength of nutirent solution decreased chlorophyll content. In oregano, the growth was vest in the stength of 0.5, but withered in the strength of 3.0 The chlorophyll content was the lowest in the strength of 0.2dS${\cdot}m^{-1}$, while vitamin C contents had no statistical differences among treatments, Oregano grown with 1.0 dS${\cdot}m^{-1}$had the highest mineral and essential oil content, but the oil yield washighest in the treatment of 0.5 dS ${\cdot}m^{-1}$. In conclusion, the strength of 0.5 dS${\cdot}m^{-1}$ herb's nutrient solution was adequated in production of marjorma and oregano in hydroponicc system.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.6
• /
• pp.860-869
• /
• 2016

This study was a report on 60 heads of Hanwoo steers(5 treatments ${\times}$ 4 heads ${\times}$ 3 repeats). Their start weights were $361.2{\pm}14.39kg$ to $380.5{\pm}27.33kg$; 12.7 to 13.6 months of age. The aim was to investigate the effect of herbal probiotic supplementation on the weight, blood composition, meat quality and immunity in beef. In case of body weight gain, con. 1 plot(183.8 kg) in the early fattening stage, T3 plot(115.1 kg) in the middle fattening stage, and T2 plot(163.3 kg) in the late fattening stage significantly increased(p<0.05). There was a statistically significant difference in the blood content of T-Cho and IgG: con. 1 plot and T1 plot in the early fattening stage, T3 plot and T2 plots in the middle fattening stage, and con. 2 plot and T1~T3 plots in the late fattening stage had higher blood content than that of other treatment plots (p<0.05). In addition, the carcass weight was highest in the T1 plot and T2 plot among the total treatment plots(p<0.05). However, no statistical significant difference was observed in the different treatments; all individual treatment plots(T1~T3 plots) were somewhat higher than the control plots(con. 1~con. 2 plots) with respect to the carcass quantity and carcass quality. Combining and analyzing all results revealed that the dietary addition of herbal probiotics for Hanwoo steers had a positive effect on the improvement of weight, amount of meat, meat quality and immunity.

• Journal of the Korean Chemical Society
• /
• v.56 no.5
• /
• pp.648-657
• /
• 2012

This study is examined for the effects of question generating strategy and feedback(teacher feedback and student peer reviews) on science achievement, self-efficiency and perception of the class in the middle school. Three classes of middle school 1st grade in a city were sampled for the study. The students in comparative group took traditional lessons and solved questions presented on worksheets distributed by a teacher. On the other hand, the students in the experimental groups 1 and 2 generated and solved questions by themselves after traditional lessons and then participated in the activity with peer's feedback and teacher's feedback, respectively. A self-efficiency test had been conducted before the treatments and the various tests such as achievement, self-efficiency and the perception of the class were carried out after treatments. The statistical results were analysed by ANCOVA, MANCOVA and t-test. The results of this study were as follows: First, there was significant difference between the control and experimental groups in the science achievement test (p<.01). But there was no significant difference between the experimental groups (p>.05). Second, both of the experimental groups showed enhanced self-efficiency compared with comparative group (p<.01). In sub-areas of self-efficiency, there were also meaningful results in the area of self-efficiency for control experimental group 1(p<.01), and in the area of difficulty preferences for experimental group 2 (p<.01). Third, the experimental group 1, given teacher's feedback, showed more positive perception of the class than the experimental group 2 that was given peer's feedback (p<.01).

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.312-312
• /
• 2017

The study was conducted to select optimal materials for promoting germination rate, high sprouting vigor by priming treatment using PEG 6000 (water potential -0.5 to 2.0 Mpa) and Azolla extracts (0.1, 1.0, and 10.0%) extracted by ethanol, distilled, and/or hot water in colored rice cultivars. Each rice seed (three black rice cultivars and two red rice cultivars) was soaked 24 and 48 hr including untreated control. In black rice, Joseongheugchal rice cultivar, azolla ethanol extract (0.1%) induced highest germination rate, germination speed was taken to 5 days in distilled water and to 3days in Azolla extracts extracted hot water. Otherwise, degree of bacterial inhibition (number of colony, $10^3cfu$) in dry seed, water soaking for 24hr, soaking with fungicide for 24hr and 48hr, soaking with fungicide and aeration for 24hr and 48 hr was 22, 500, 95, and 0.46, respectively. In order to minimize fungal inhibition, a method can be chosen to combination of soaking fungicide and aeration for 48 hr. In seed priming treatments using growth pouch, seed soaking with fungicide did not affect change of germination percentage and germination speed, it delayed only 2 or 4day in the Joseongheugchal rice cultivar. It differs from rice cultivars and priming materials, Azolla extract(0.1 to 1%) promotes seed germination percentage in the Ilpum, Hongjinju, and Joseonghuegchal, in addition, germination in Jeogjinju cultivar was only promoted by PEG solution(10 to 20%), otherwise, it showed much lower or inhibited on the germination in Heugjinju and Sinmyungheugchal rice cultivars. In a paddy field trial, seedling establishment rate by applying PEG6000 and azolla extract did not show significantly statistical difference. When it compared with untreated control, seedling establishment rate was increased over 50% in priming treatments. Interestingly, seedling establishment rate under azolla extract (0.1%) extracted with ethanol was promoted over 2.5 times compared to the control in a black rice, Joseongheugchal and red rice, Jeogjinju.

• Journal of Veterinary Clinics
• /
• v.9 no.2
• /
• pp.407-416
• /
• 1992

This experiment was conducted to investigate the feed value of dried aloe leaf meal and the changes of blood values in growing pigs A total of 48 three crossbred pig(Landrace${\times}$Yorkshire${\times}$Hampshire) weighing average 25kg initially were randomly distributed into 12 groups of 4 heads(2 females and 2 males) each There groups were alloted on one of the following 3 dietary treatment : non-supplumented diet (control group), diet supplemented with 3% of dried aloe leaf meal(Aloe 3% group), diet supplemented with 6% dried aloe leaf meal(Aloe 6% group). The results obstained in feeding trial for 6 weeks and analysis of blood were summarized as follows : 1. In the chemical composition of dried aloe leaf meal contents of crude protein and crude ash were 9.43% and 15.10%, respectively. Amino acid composition was also inferior to other grain and bran feeds. 2. Daily gain of control, Aloe 3% and 6% groups were 740.5, 658.1 and 197.1 g respectively. Three were significant difference in daily gain among groups( p<0.05) and tended to be decreased with increasing levels of dried aloe leaf meal. 3. Daily feed intake of control, Aloe 3% and Aloe 6% groups were 1,960.5, 1,737.0 and 1,123.0 g, respectively. There were significant differences in daily feed intake among treatments(p<0.05) and tended to be decreased with increasing levels of dried aloe leaf meal. 4. Feed efficiency of control, Aloe 3% and Aloe 6% groups were 2.72, 2.63 and 5.70 respectively. Feed efficiency for pig fed diet supplemented with 3% of dried aloe leaf meal was a little superior to control, although no statistical difference was obstained between two treatments. 5. The digestibilities of dry matter, crude protein, nitrogen free extract and extract were significantly (p<0.05) higher for control group than for Aloe 3% and Aloe 6% groups. But there were no significant differences in digestibility of crude fat and crude fiber between control and Aloe 3% groups. 6. There were no difference between aloe leaf meal administrated groups and control group in blood picture and serum chemistry.