• 산업기술연구
• /
• 제29권B호
• /
• pp.57-64
• /
• 2009

This study has analysed actual overbreak, shotcrete rebound and the ratio between the actual quantity of shotcrete to designed shotcrete measured during a NATM tunnel construction. The measured shotcrete rebound was about 7.2% in average which was about half the allowable rebound (15%), showing shotcrete spraying was performed well. Based on the measurement of excavated tunnel shape, average overbreak was about 28.5cm after tunnel excavation by drill and blasting method. This was about 260% of allowable overbreak. In addition, due to the rebound and overbreak actual amount of shotcrete used in the tunnelling work was about 116.5 % of the designed value. According to the field measurement the ratio of actual shotcrete to designed value showed some relation with standard support pattern, but the size of overbreak did not show the correlation with standard support pattern. Hence current design specifications stating the size of overbreak based entirely on standard support pattern should perhaps be reestablished. The insight into the design guideline regarding overbreak and shotcrete.

• 대한기계학회논문집A
• /
• 제33권4호
• /
• pp.409-416
• /
• 2009

Standard procedures for a fracture toughness testing require very severe restrictions for the specimen geometry to eliminate a size effect on the measured properties. Therefore, the used standard fracture toughness data results in the integrity assessment being irrationally conservative. However, a realistic fracture in general structures, such as in nuclear power plants, may develop under the low constraint condition of a large scale yielding with a shallow surface crack. In this paper, cleavage fracture toughness tests have been made on side-grooved PCVN (precracked charpy V-notch) type specimens (10 by 10 by 55 mm) with various crack depths. The constraint effects on the crack depth ratios were evaluated quantitatively by the developed scaling method using the 3-D finite element method. After the fracture toughness correction from scaling model, the statistical size effects were also corrected according to the standard ASTM E 1921 procedure. The results were evaluated through a comparison with the $T_0$ of the standard CT specimen. The corrected $T_0$ for all of the PCVN specimens showed a good agreement to within $5.4^{\circ}C$ regardless of the crack depth, while the averaged PCVN $T_0$ was $13.4^{\circ}C$ higher than the real CT test results.

• 한국문헌정보학회지
• /
• 제11권
• /
• pp.77-116
• /
• 1984

Korean university libraries are increasing their library collection each year according to the standard set by the Ministry of Education. The standard states that all the university libraries are required to keep 3 books for newly enrolling students, 30 books for each enrolled student and 5, 000 books for each department. The increasing number of the university library collection brings many problems in the libraries. 1. The size of the library collection is not related to the satisfaction of the library user's requests. The satisfaction is usually related to number of the new publications received in the library. Z. The Korean publication is limited to a small number. It could not meet the university standard. Therefore, the number is filled with the foreign publications. But the use of them is not frequent. Even the number of the domestic and foreign new publications together could not meet all the requests of the university library users. Only cooperation with other libraries will be able to meet most of the diversified requests. 3. Most of the present library collection are not likely to be used in the future and they should be eventually discarded. Present library administration put too much emphasis on the size of library collection and only the aquisition of the material is main concern of the university librarians. They need to consider other factors in the aquistion of the library collection. They should make their collection development in accordance with user's requests in addition to meet the university standard.

• Design & Manufacturing
• /
• 제11권3호
• /
• pp.29-34
• /
• 2017

Increased demand for parts with micro-pattern structure made of metals, ceramics, and composites in various fields such as medical ultrasonic sensors, CT collimators, and ultra-small actuator parts. Micro powder injection molding (PIM) is a technology for manufacturing micro size, high volume, complex, precision, net-shape components from either metal or ceramic powder. In the present study, a standard mold with a variable insert core capable of producing various micro patterns was investigated. An injection molding test was performed on a standard mold using a line type micro-pattern core having an aspect ratio of 2, a slenderness ratio of 70, a pattern size of $200{\mu}m$, and a pattern spacing of $150{\mu}m$. During the filling process, the deformation of the mold with large aspect ratio and slenderness ratio was analyzed by the experiment and the numerical simulation according to the position of the gate. We proposed a mold structure that minimizes mold deformation by gate modification and enables uniform pattern filling behavior.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.86-93
• /
• 2002

There are many different factors used in calculating control limits of control chart for variable data. Specially these factors are divided into two groups such as "no given standard" and "given standard"(namely, for analysis and management), but many kind of factors give rise to confusion. Therefore, It is necessary to manifest relationships among factors for easy application regardless of subgroup size. Many SQC textbooks show us plainly these factors, but do not have enough for adequate explanation of relationships among factors. Besides, notation of these factors of SQC textbook isn't coincide with another one, so necessity to the coincidence for the notation of the factors is highlighted during my work recently. In this study, the close examination about relationships among various factors (A-A3, B3-B6, D1-D4, C4, d2, d3 etc) was carried out. Spread sheet results are presented for getting factors according to subgroup size, by grouping as the case of "no given standard" and "given standard". How are these factors to be applied in statistical package (ex, Minitab) have been analyzed using a series of sample data. analyzed using a series of sample data.

• 한국레이저가공학회지
• /
• 제14권4호
• /
• pp.21-27
• /
• 2011

In this work, we have studied on time-resolved transient reflective image of single crystalline Si surface after single-shot fs-laser irradiation with varying the laser fluence under two different laser spot sizes. The temporal profiles of transient reflectivity changes as well as its maximum values at the early delay time were found to be strongly dependent on both the laser beam spot size and laser fluence. We have interpreted the dependence of transient reflectivity changes on the laser spot size in terms of a relaxation of the generated free carriers to the bulk silicon, which should be interacted with the plasma.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.87-88
• /
• 2006

• 산업경영시스템학회지
• /
• 제10권16호
• /
• pp.27-38
• /
• 1987

This paper develops a standard time table using STD(Standard Tine Data) Technique in multi-product and one-unit production systems. STD leads to greater consistency between similar jobs. The constant-time and special elements will always be the same even though they pertain to different part numbers. Actually, the standards will very based on the size of the variable elements that are in control of the time. A real-field example is presented.

• Journal of the Korean Statistical Society
• /
• 제26권3호
• /
• pp.383-395
• /
• 1997

This paper proves that the standard bootstrap approximation for the least absolute deviation (LAD) estimate of .beta. in AR(1) processes with infinite variance error terms is asymptotically valid in probability when the bootstrap resample size is much smaller than the original sample size. The theoretical validity results are supported by simulation studies.

• ETRI Journal
• /
• 제34권1호
• /
• pp.142-145
• /
• 2012

The main challenge at present in constructing hierarchical identity-based encryption (HIBE) is to solve the trade-off between private-key size and ciphertext size. At least one private-key size or ciphertext size in the existing schemes must rely on the hierarchy depth. In this letter, a new hierarchical computing technique is introduced to HIBE. Unlike others, the proposed scheme, which consists of only two group elements, achieves constant-size private keys. In addition, the ciphertext consists of just three group elements, regardless of the hierarchy depth. To the best of our knowledge, it is the first efficient scheme where both ciphertexts and private keys achieve O(1)-size, which is the best trade-off between private-key size and ciphertext size at present. We also give the security proof in the selective-identity model.