• 제목/요약/키워드: standard consolidation test

검색결과 68건 처리시간 0.025초

일정 압력비 압밀시험을 이용한 연약점토의 압밀특성 분석 (Analysis of Consolidation Characteristics of Soft Clay Based on Constant Pressure Ratio Consolidation Test)

  • 김훈규;정두회
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.455-462
    • /
    • 2002
  • There exist several kinds of continuous consolidation tests to analyze the consolidation behavior of soft clay. The constant rate of strain (CRS) test has been adopted as a standard method by several countries, and some researches also have been peformed by domestic researchers. Among those, the constant pressure ratio (CPR) test is peformed with the constant ratio of excess porewater pressure to vertical effective stress. The test has the advantage of considerable reduction of duration time. In the study, the consolidation characteristics are analyzed by performing the CPR test as validate the pressure ratio with undisturbed soft clay and remolded clay, Also, results of the standard consolidation test and CRS test are compared to verify the CPR test can be employed for practical use. As a result, effects of variation of the pressure ratio on consolidation parameter are similar to the strain rate in the CRS test. Therefore, the test can be used to analyze the consolidation behavior of soft clay But the test have some problems such as expensive cost of equipment and highly skilled workmanship.

  • PDF

포항 점토 지반의 수평배수 압밀특성 연구 (A Study on Character of Consolidation for Radial Drainage of Pohang배s Clay Ground)

  • 이송;전제성;김원영
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 봄 학술발표회 논문집
    • /
    • pp.685-692
    • /
    • 2000
  • Vertical drain used improvement soft clay is made of not only decreasing construction time but also increasing the ground strength during some decades. As, it is applied to improvement soft clay with vertical drain, it is designed by the result that is caused by oedemeter test ignored anisotropic of the ground related to consolidation conditions. When we are expected consolidation conditions, the most important factors is soil of compaction and water permeability. Above all, anisotropic of the ground permeability show the results which differ between vertical and radial drainage. Recently, We study for radial consolidation coefficient and permeability coefficient that utilized Rowe Cell Consolidation and permeability tester but, it dont use well because of not only a supply lack also difficulty of test. The paper experimented with searching anisotropic of the ground so there are Rowe Cell test, standard consolidation tester and modified standard consolidation test that have pohang's soft clay ground. Therefore, we find anisotropic of the ground and a tester of easy use more than before. We made a comparison test result between the devised tester and Rowe Cell tester, Also, we learned average degree of consolidation for partial penetrating vertical drains. We were found relations as effective stress-void and effective stress-permeability coefficient through those tests.

  • PDF

제하-재재하 시 CRS 압밀 시험의 최적 변형률 속도 (Optimal Strain Rate of Unloading-Reloading Cycle in Constant Rate of Strain Consoildation Test)

  • 박가현;윤찬영;정충기
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회
    • /
    • pp.1156-1167
    • /
    • 2010
  • The constant rate of strain (CRS) consolidation test has been widely used to evaluate consolidation characteristics of soils instead of the standard Incremental Loading Test. In practical problems, after the ground improvement, the condition of the soil is over-consolidated. Therefore, it is important to determine the recompression indices and the coefficient of consolidation(or the coefficient of swelling) of unloading-reloading cycle to predict the settlement behavior. However, since standard testing procedures or studies related with strain rate are insufficient especially in unloading-reloading cycle, it is difficult to predict the settlement field behavior accurately from the CRS consolidation test results in spite of its lots of strengths. The several CRS consolidation tests were performed changing the unloading strain rate from 0.2%/hr to 20%/hr with vertical drainage condition using the reconstituted kaolinite sample. For the reconstituted kaolinite sample in CRS consolidation test, the recompression indices are insensitive to the strain rate. It is revealed that the coefficient of consolidation of reloading is affected by the developed pore pressure during unloading. Additionally, the test should be conducted in the positive pore pressure ratio range (3~15%) to obtain the reasonable coefficient of consolidation in the whole range(loading, unloading and reloading).

  • PDF

표준압밀시험기를 사용하는 수평배수 압밀셀의 개발 (Developement of Consolidation Cell of Horizontal Drainage using Standard Consolidation Tester)

  • 주재우;정규향;조삼덕;이천주;박종범
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2004년도 춘계학술발표회
    • /
    • pp.678-683
    • /
    • 2004
  • The most popular consolidation tester is a standard consolidatiion tester, which performs consolidation using the step load weight. However this apparatus is used to obtain only the vertical consolidation coefficient. Therefore the purpose of this study is to develope the horizontal consolidation cell for a horizaontal consolidation coefficient. Various size of tests have been peroformed to investigate the effect of scale effect. From the test results, it has turned out that this horizontal consolidation cell has a good function for a horizontal consolidation coefficient.

  • PDF

침투압을 이용한 급속압밀시험 : 방법 및 검증 (Fast Consolidation Test Using Seepage Forces : Method and Validation)

  • 이강일;김태형;도브로슬리브지니다르씨스
    • 한국지반공학회논문집
    • /
    • 제25권4호
    • /
    • pp.31-38
    • /
    • 2009
  • 최근의 압밀시험(표준압밀시험 또는 자중압밀시험)을 대신하여 성형되는 않은(또는 성형이 불가능한 상태의) 연약한 흙의 압밀거동을 연속적으로 빠르고 편리하게 결정할 수 있는 실험방법이 요구된다. 그래서 본 연구에서는 이와 같은 흙의 압밀 거동을 플로우 펌프에서 발생된 침투압을 이용하여 연속적으로 빠르게 획득할 수 있는 급속압밀실험을 제안하였다. 실험 장치는 삼축셀, 플로우 펌프, 변환기, 데이터처리장치 등으로 구성되고, 실험의 과정은 동일 시료에 대해 침투압에 의한 압밀, 하중재하에 의한 압밀, 압밀 후 투수시험 순으로 연속적으로 진행된다. 또한 본 실험법의 검증을 위해 기존의 표준압밀시험으로부터 얻은 결과와 비교 검토도 이루어졌다. 연구 결과 급속압밀실험법이 연약한 흙의 압밀 침하량 산정에 필요한 데이터를 쉽고 빠르게 산정할 수 있는 방법임을 알 수 있었다.

압밀시험의 수치해석에 의한 MCC 모델과 SSC 모델 비교 (Comparison of MCC and SSC Models Based on Numerical Analysis of Consolidation Test)

  • 권병해;임성훈
    • 한국농공학회논문집
    • /
    • 제66권2호
    • /
    • pp.1-12
    • /
    • 2024
  • In order to integrate two consolidation theories of Terzaghi's consolidation theory and Mesri's secondary compression theory and to identify a model suitable for analyzing stress-strain behavior over time, numerical analysis on consolidation tests were conducted using a modified cam-clay model and a soft soil creep model and the following conclusions were obtained. The results of numerical analysis applying the theory that a linear proportional relationship is established between the void ratio at logarithmic scale and the permeability coefficient at logarithmic scale is better agreement with the result of oedometer test than the results of applying constant hydraulic conductivity. The modified cam-clay model is a model that does not include secondary compression, but the slope of the normal consolidation line corresponding to the compression index of the standard consolidation test includes secondary compression, so the actual settlement curve over time is lower than the predicted value through numerical analysis. It always gets smaller. Other previous studies that applied Terzaghi's consolidation theory to consolidation test analysis showed the same results and were cross-confirmed. The soft soil creep model, which includes secondary compression in the theory, showed good agreement in all sections including secondary compression in the consolidation test results. It was judged appropriate to use a soft soil creep model when performing numerical analysis of soft clay ground.

하중조건이 연약초토의 압밀에 미치는 영향 (Effects of Loading Conditions on Consolidation Beharion of the Soft Clay)

  • 강병희
    • 한국농공학회지
    • /
    • 제13권4호
    • /
    • pp.2445-2455
    • /
    • 1971
  • One-dimensional Consolidation tests with pore pressure measurement were caried in the ANTE-US consolidometer in order to investigate the effects of loading conditions on consolidation behavior of the soft clay. Undisturbed specimens of a sensitive clay were loaded in load-increment ratioes 0.5, 1.0 and 2.0, and load increment duration of 1, 6, 12, 24 and 48 hours with the application of 40 psi of back pressure. There is no significant effect of load-increment ratio on compression-pressure relationship, but the test with one-hour load increment duration doesn't represent the same results of the standard consolidation test in the sensitive clay.

  • PDF

이탄의 장기압밀특성에 관한 연구 (Studies on the Long-term Consolidation Characteristics of Peats)

  • 김재영;주재우
    • 한국농공학회지
    • /
    • 제31권1호
    • /
    • pp.106-116
    • /
    • 1989
  • This study aims at scrutinizing the long4errn consolidation characteristics of peats sampled at three different regions of Chonbuk province. The standard consolidation test and the single load consolidation test were performed about these samples and especially in case of the latter the loading period was 350 days. The main condusions analyzed are as follows. 1. Void ratio showed much greater values than that of the general clay and was decresed greatly according to the increase of the load. 2. In case of the relationship between the sefflement and the long-term settlement time the rate of settlement increment became great according to the increase of the load step and the long4erm settlement became linely proportional to the logarithm of time alter 10 minutes. 3. The linear correlation was showed between the long4erm settlement time and the void ratio and therefore equations by regression analysis were derived in order to estimate the long-term settlement The slope of straight lines increased according th the increase of the load step and secondary consolidation coefficients ranged from 0.04-0.27. 4. The secondary consolidation coeffcient became linealy proportional to the compression index and the ratio of Ca to CC was 0.072. 5. The period required in ending the primary consolidation was about 10 minutes and alter that the secondary consolidation coefficient appeared to have constant value. Therefore the secondary consolidation coefficient was judged to be used as a significant factor in estimating the long4erm settlement. 6. In case of the single load consolidation test the secondary consolidation coefficient showed the tendancy increasing according to the increase of the consolidation pressure.

  • PDF

대형자연시료를 이용한 광양점토의 압밀특성에 관한 실험적 연구 (Experimental Study on the Consolidation Characteristics of Kwang-Yang Clay by Large Block sampling)

  • 김종국;유성진;채영수
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 지반공학 공동 학술발표회
    • /
    • pp.429-436
    • /
    • 2005
  • In this study, we have compared with the differences between the extent of sampling disturbance and consolidation characteristics by experiments, which are consolidation test and have been performed with Kwang-Yang clay samples. The effects on sampling disturbance to consolidation characteristics of soft clay have been inverstigated by using soil samples obtained from large block sampling and piston sampling methods. Through a few experiments, we've got important results which are that the consoilidation parameter of large block sample(Pc, Cc, Cv) is much larger than the value of parameter of piston sample. We've also found the fact that the large block sample using the large size sampler is much better than piston sample in the quality of goods to lessen the effects on disturbance of sampling. When compared to the parameter of consolidation along with the methods of experiment, we found that the result performed by large size consolidation test is the greatest one and CRS is much better than standard consolidation test to seek for proper parameter.

  • PDF

Piezocone 시험을 이용한 해성점토의 수평압밀 특성 연구 (Horizontal Consolidation Characteristics of Marine Clay Using Piezocone Test)

  • 이강운;윤길림;채영수
    • 한국지반공학회논문집
    • /
    • 제19권5호
    • /
    • pp.133-144
    • /
    • 2003
  • 국내 남해안 해성점토 지반의 압밀특성을 파악하고자 Piezocone 시험으로 평가한 수평방향 압밀계수와 표준압밀 시험결과를 비교하였다. 기존에 제안된 수평방향 압밀계수 추정 방법들은 상호간의 편차가 클 뿐만 아니라 실내 압밀 시험값과 비교해도 그 차가 커서 사용하기에는 많은 불확실성을 갖고 있는 것으로 알려져 있다. 제안된 방법중에서 Torstensson(1977)의 구형모델과 공동확장이론, 수정 Cam-Clay모델의 한계상태이론을 적용한 Burns and Mayne의 방법(1998)은 본 연구지역과 같은 고소성 지반에서 신뢰성이 높은 것으로 나타났다. 이중 Burns and Mayne의 방법(1998)을 사용하여 소산시험결과를 정규화한 분석결과에 따르면 50% 압밀시의 시간계수($T_{50}$)는 0.015로 추정되었다. 또한 본 연구 지반조건과 유사현장의 시험성과를 활용하여 비교 분석한 결과 새롭게 제안한 Bums and Mayne의 방법(1998)은 실내 시험값에 비해 약 1.5배 작은 것으로 나타났다. 이러한 연구결과는 표준압밀시험 결과차가 상호간에 3~4배 차를 보이는 것을 감안할 때 상당히 양호한 것으로 나타났다. 이외에도 또 다른 차원에서 소산시험결과로부터 압밀계수를 직접 산정하는 방법으로서 국내에서 널리 사용중인 Robertson 등(1992)의 제안방법을 이용하여 새로운 도표를 제안하였다. 제안된 도표는 Burns and Mayne(1998)의 이론적 방법을 활용한 방법으로서 소성이 높은 지반에서 활용할 경우 신뢰성이 높은 것으로 나타났다.