• Journal of the Korean Society for Library and Information Science
• /
• 제58권2호
• /
• pp.57-80
• /
• 2024

Eisner emphasized the importance of problem-solving objectives and expressive objectives in addition to behavioral objectives, and communication through multiple modalities including linguistic, visual, aural, spatial, gestural modes. This study analyzes 'Libraries and Information Life,' a textbook developed for information literacy instruction, by dividing it into educational objectives types(behavioral, problem-solving, expressive) and multimodal modes(linguistic, visual, auditory, spatial, and gestural), and seeks to derive implications for setting educational objectives for information literacy instruction and developing textbooks. The textbook has four volumes for elementary low-grade, elementary high-grade, middle school, and high school levels. Educational objectives were extracted from the textbooks, and 3 librarian-teachers were engaged in the analysis of these objectives. The main findings and implications of this study are as follows. First, when looking at the types of educational objectives, the proportion of behavioral objectives was found to be excessively high, and there is a need to strengthen the proportion of problem-solving objectives and expressive objectives. Second, problem-solving objectives tend to overlap with behavioral objectives, indicating a need to develop problem-solving objectives with defined conditions and solution requirements. Third, expressive objectives concentrated in specific units need to be placed evenly in other units. Fourth, in the case of multi-modality mode, the proportion of the linguistic mode must be reduced, the proportion of the visual, auditory, spatial, and gestural modes must be increased, and it is necessary to set educational objectives with clear characteristics of each mode.

• Journal of the Korean Association of Geographic Information Studies
• /
• 제21권4호
• /
• pp.132-144
• /
• 2018

3D Geo-spatial information models have been widely used in the field of Civil Engineering, Medical, Computer Graphics, Urban Management and many other. Especially, in surveying and geo-spatial field, the demand for high quality 3D geospatial information and indoor spatial information is so highly increasing. However, it is so difficult to provide a low-cost and high efficiency service to the field which demand the highest quality of 3D model, because pre-constructed spatial data are composed of different formats and storage structures according to the application purpose of each institutes. In fact, the techniques to construct a high applicable 3D geo-spatial model is very expensive to collect and analyze geo-spatial data, but most demanders of 3D geo-spatial model never want to pay the high-cost to that. This study, therefore, suggest the effective way to construct 3D geo-spatial model with low-cost of construction. In general, the effective way to reduce the cost of constructing 3D geo-spatial model as presented in previous studies is to combine the raw data obtained from point cloud observatory and UAV imagery, however this method has some limitation of usage from difficulties to approve the use of raw data because of those have been managed separately by various institutes. To solve this problem, we developed the linking & management system for unifying a high-Resolution raw geo-spatial data based on the point cloud DB and apply this system to extract the basic database from 3D geo-spatial mode for the road database registration. As a result of this study, it can be provided six contents of main entries for road registration by applying the developed system based on the point cloud DB.

• Journal of Korean Society of Rural Planning
• /
• 제29권3호
• /
• pp.25-37
• /
• 2023

According to the 「Rural Spatial Reconstruction and Regeneration Support Act」, enacted on March 29, 2024, all local governments are required to establish a 'Rural Spatial Reconstruction and Regeneration Plan' (hereinafter referred to as the 'Rural Spatial Plan'). In order for the 'Rural Spatial Plan' to be appropriately established, this study analyzed the supply and demand of spatial data from the perspective of user stakeholders and derived implications for improving rural spatial planning data utilization. In conclusion, three key recommendations come from this result. Firstly, it is necessary to establish an integrated DB for rural spatial planning data. This can solve the problem of low awareness of scattered data-providing websites, reduce the processing time of non-GIS data, and reduce the time required to acquire data by securing the availability of data search and download. In particular, research should be conducted on the establishment of a spatial analysis simulation system to support stakeholders' decision-making, considering that many stakeholders have difficulty in spatial analysis because spatial analysis techniques were not actively used in rural projects before the implementation of the rural agreement system in 2020. Secondly, research on how to improve data acquisition should be conducted in each data sector. The data sector group with the lowest ease of receiving are 'Local Community Domain', 'Changes in Domestic and International Conditions', and 'Provision and Utilization of Daily Life Services'. Lastly, in-depth research is needed on how to raise each rural spatial planning data supply stakeholder to the position of player. Stakeholders of 'University Institutions' and 'Public Enterprises and Research Institutes' should give those who participate in the formulation of rural spatial plans access to the raw data collected for public work. Stakeholders of 'Private company' need to come up with realistic measures to build a data pool centered on consultative bodies between existing private companies and then prepare a step-by-step strategy to fully open it by participating various stakeholders. In order to induce 'Village Residents and Associations' stakeholders to play a leading role as owners and producers of data, personnel should be trained to collect and record data related to the village. In addition, support measures should be prepared to continue these activities.

• Spatial Information Research
• /
• 제20권4호
• /
• pp.1-16
• /
• 2012

There is no doubt that the urban heat island (UHI) is a mounting problem in built-up environments, due to energy retention by the surface materials of dense buildings, leading to increased temperatures, air pollution, and energy consumption. To investigate the UHI, three-dimensional (3-D) information is necessary to analyze complex sites, including dense building clusters. In this research, 3-D building geometry information is combined with two-dimensional (2-D) urban surface information to examine the relationship between urban characteristics and temperature. In addition, this research introduces spatial regression models to account for the spatial spillover effects of urban temperatures, and includes the following steps: (a) estimating urban temperatures, (b) developing a 3-D city model, (c) generating urban parameters, and (d) conducting statistical analyses using both Ordinary Least-Squares (OLS) and Spatial Regression Models. The results demonstrate that 3-D urban characteristics greatly affect temperatures and that neighborhood effects are critical in explaining temperature variations. Finally, the implications of the results are discussed, providing guidelines for policies to reduce the UHI.

• Journal of the Korean association of regional geographers
• /
• 제21권3호
• /
• pp.583-592
• /
• 2015

As the increase of an environmental disease has become a social problem after industrialization, academic interest in a spatial difference and characteristics of an environmental disease is on rise. The purpose of this study is to analyze the spatial distribution and characteristics of an environmental disease using the data provided by National Health Insurance Corporation in 2009. This research is focusing on atopic dermatitis among a variety of environmental diseases and shows the map that atopic dermatitis patients are distributed. Also, The Local Moran's I show how spatial autocorrelation of atopic dermatitis patients are distributed. First, the distribution of atopic dermatitis patients show the spatial difference. Second, 42 places including the western part of Incheon are hot spots of atopic dermatitis. Third, 39 places including Danyang are cold spot of atopic dermatitis. Forth, Jeju-si and Seogwipo-si are unusually hot spot of atopic dermatitis. These results have important implications that further research need to be done in public health geography.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제12권5호
• /
• pp.2383-2389
• /
• 2011

Ubiquitous applications require hybrid continuous query processing which processes both on-line data stream and spatial data in the disk. In the hybrid continuous spatial query processing, disk access costs for the high-volume spatial data should be minimized. However, previous indexing methods cannot reduce the disk seek time, because it is difficult that the data are stored in contiguity with others. Also, existing methods for the space-filling curve considering data cluster have the problem which does not cluster available data for queries. Therefore, we propose the region storage structure for efficient data access in hybrid continues spatial query processing. This paper shows that there is an obvious improvement of query processing costs through the contiguous data storing method and the group processing for user queries based on the region storage structure.

• Journal of Korea Spatial Information System Society
• /
• 제2권2호
• /
• pp.49-58
• /
• 2000

With the growing realization that the GIS data management becomes important more than ever, a great deal of the spatial data is being digitalized through various GIS projects, such as NGIS project. However, the integrated search and analysis for GIS data are highly constrained by the databases being heterogeneous and distributed among organizations. This paper is to introduce the system developed to solve the problem of interoperability in the heterogeneous and distributed databases environment. The system architecture is presented which is composed of spatial data servers, nodes, and a gateway. Also, the paper provides the implementation details of the client application to access and analyze the distributed and heterogeneous spatial data with the standardized interface. Finally, based on the technical architecture, the korea spatial data infrastructure is explained.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제28권2호
• /
• pp.189-196
• /
• 2010

Spatial information and smart phone technology have made innovative improvement of daily life. Spatial and geographic information are in practice for various applications. Especially, spatial information along with information and telecommunication technology could create new contents for providing services for convenient daily life. Spatial information technology, recently, is not only for acquiring location and attribute data but also providing tools to extract information and knowledge systematically for decision making. Various indoor applications have emerged in accordance with demands on daily GIS(Geographic information system). This paper aims for applying spatial information technology to support decision-making in shopping. The main contents include product database, optimal path search, shopping time expectation, automatic housekeeping book generation and analysis. Especially for foods, function to analyze information of the nutrition facts could help to improve dietary pattern and well-being. In addition, this system is expected to provide information for preventing overconsumption and impulse purchase could help economical and effective purchase pattern by analyzing propensity to consume.

• Journal of computational fluids engineering
• /
• 제9권3호
• /
• pp.8-17
• /
• 2004

A Semi-Lagrangian method based on CIP(Cubic Interpolated Pseudoparticle)method is proposed and it is applied to solve the two dimensional advection equation. Especially the attentions are given to settle the pole problem and to enhance the accuracy in solving the advection equation on the spherical coordinate system. Tn this algorithm, the CU method is employed as the Semi-Lagrangian method and extended to the spherical coordinate system. To enhance the accuracy of the solution, the spatial discretization is made by CIP method. The mathematical formulation and numerical results are also described. To verify the efficiency, accuracy and capability of proposed algorithm, two dimensional rotating cosine bell problem and the frontogenesis problem are simulated by the present scheme. As results, it is confirmed that the present scheme gives an accurate solution and settles the pole problem in the advection equation on the sphere.

• International Journal of Contents
• /
• 제7권2호
• /
• pp.6-10
• /
• 2011

The directional MAC (DMAC) protocol improves the spatial reuse, but directional packets on the control channel cause the deafness problem. In this paper, we propose a tone dual-channel DMAC protocol for mobile ad-hoc networks. In the proposed MAC protocol, the use of omnidirectional transmissions using an omnidirectional out-of-band tone solves the deafness problem and decrease packet collisions on the control channel. The use of an omnidirectional out-of-band tone also mitigates the hidden terminal problem. We use the negative CTS (NCTS) mechanism to solve the exposed terminal problem. The throughput performance of the proposed MAC protocol is confirmed by simulations using the Qualnet simulator.