• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.627-629
• /
• 2017

There are a lot of research results on the problem of finding the union and intersection of n rectangles on a plane. Lipski와 Preparata(1981) presented a sequential algorithm with O(nlogn) time and O(nlogn) space for the problem of finding the union of rectangles whose sides are parallel to the coordinate axes[1]. Alevizos(2013) presented an improved O(nlogn) time and O(n) space algorithm for the same problem[2]. In this paper, we consider the problem of finding the union of iso-oriented rectangles such that the intersection of them is not an empty set. In this case, the union of the rectangles becomes a connected area, that is, an orthogonal polygon. In this paper, we propose a parallel algorithm that solves this problem in constant time in a reconfigurable mesh(in short, RMESH) model.

• Toxicological Research
• /
• v.35 no.4
• /
• pp.295-301
• /
• 2019

In this review, we describe the absorption rates (Caco-2 cell permeability) and hepatic/plasma pharmacokinetics of 53 diverse chemicals estimated by modeling virtual oral administration in rats. To ensure that a broad range of chemical structures is present among the selected substances, the properties described by 196 chemical descriptors in a chemoinformatics tool were calculated for 50,000 randomly selected molecules in the original chemical space. To allow visualization, the resulting chemical space was projected onto a two-dimensional plane using generative topographic mapping. The calculated absorbance rates of the chemicals based on cell permeability studies were found to be inversely correlated to the no-observed-effect levels for hepatoxicity after oral administration, as obtained from the Hazard Evaluation Support System Integrated Platform in Japan (r = -0.88, p < 0.01, n = 27). The maximum plasma concentrations and the areas under the concentration-time curves (AUC) of a varied selection of chemicals were estimated using two different methods: simple one-compartment models (i.e., high-throughput toxicokinetic models) and simplified physiologically based pharmacokinetic (PBPK) modeling consisting of chemical receptor (gut), metabolizing (liver), and central (main) compartments. The results obtained from the two methods were consistent. Although the maximum concentrations and AUC values of the 53 chemicals roughly correlated in the liver and plasma, inconsistencies were apparent between empirically measured concentrations and the PBPK-modeled levels. The lowest-observed-effect levels and the virtual hepatic AUC values obtained using PBPK models were inversely correlated (r = -0.78, p < 0.05, n = 7). The present simplified PBPK models could estimate the relationships between hepatic/plasma concentrations and oral doses of general chemicals using both forward and reverse dosimetry. These methods are therefore valuable for estimating hepatotoxicity.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.10
• /
• pp.429-438
• /
• 2021

In recent, realistic content has been applied in various ways due to the development of display technology and hologram, the final realistic content technology, have been used limitedly in accordance with the growing public demand. However, most realistic content requires additional devices of HMD (head mounted device) or glasses type, and other realistic content display technologies deliver a single image plane in the experience space to the user, providing a monotonous content experience. Various realistic contents with hologram technology are introduced in this work. In addition, we propose an interaction based realistic hologram service based that combines projection mapping and floating holograms. Projection-mapped screens and multi-floating hologram device provide a three-dimensional volumetric space with extended depth orientation from the user's point of view, while allowing users' entire and partial motions to be recognizable through multiple sensors.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.617-626
• /
• 2021

During supersonic flight of vehicles, the thermal behavior of structures under high-temperature environment is important for thermal-structural design. In this study, full-field thermal deformation and stress concentration of the notched structure was performed using global-local multi-digital image correlation (multi-DIC) systems. This techniques were developed and implemented by multi-DIC systems consists of 2D DIC system and 3D DIC system. The specimen was heated in a heating chamber to achieve the thermal expansion behavior. Then the images of structure's deformation and stress concentration at various temperature were recorded and analyzed by multi-DIC system. Afterward, full-field thermal deformation of the notched structure was determined with DIC technique and stress concentration at the notched structure was calculated by further processing. Finite element analysis of the notched structure is performed in ABAQUS^TM and the results of the experiments show good agreement with those obtained from simulation. The results achieved in this study show the efficiency of the muilti-DIC method in thermal deformation as well as stress concentration of notched structure.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.699-708
• /
• 2021

In this paper, the aerodynamic and aeroacoustic characteristics that vary depending on the rotation axial distance between the upper and lower rotor, which is one of the design parameters of the coaxial rotor, is analyzed in the hovering condition using the computational fluid dynamics. Aerodynamic analysis using the Reynolds Averaged Navier Stokes equation and the aeroacoustic analysis using the Ffowcs Williams ans Hawkings equation is performed and the results were compared. The upper and lower rotor of the coaxial rotor have different phase angle which changes periodically by rotation and have unsteady characteristics. As the distance between the upper and lower rotors increased, the aerodynamic efficiency of the thrust and the torque was increased as the flow interaction decreased. In the aeroacoustic viewpoint, the noise characteristics radiated in the direction of the rotational plane showed little effect by axis spacing. In the vertical downward direction of the axis increased, the SPL maintains its size as the frequency increases, which affects the increase in the OASPL. As the axial distance of the coaxial rotor increased, the noise characteristics of a coaxial rotor were similar with the single rotor and the SPL decreased significantly.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.2
• /
• pp.121-128
• /
• 2021

In this paper, we propose a path generation and tracking algorithm of an unmanned air vehicle in a two-dimensional plane given the initial and final points. The path generation algorithm using the Dubins curve proposed in this work has the advantage that it can be applied in real time to an unmanned air vehicle. The path tracking algorithm is an algorithm similar to the line-of-sight induction algorithm. In order to efficiently control the direction angle, a gain related to the look ahead distance concept is introduced. Most of UAVs have the limited maximum curvature due to the structural constraints. A numerical simulation is conducted to follow the path generated by the sliding mode controller considering the angular velocity limit. The path generation and tracking performance is verified by comparing the suggested controller with conventional control techniques.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.416-421
• /
• 2022

In this study, we present a fully automated system that combines camera technology with liquid crystal technology to create a polarization camera capable of detecting the partial linear polarization of light reflected from an object. The use of twisted nematic (TN) liquid crystals that electro-optically modulate the polarization plane of light eliminates the need to mechanically rotate the polarizing filter in front of the camera lens. Images obtained using these techniques are imaged by computer software. In addition, liquid crystal panels have been produced in a square shape, but many camera lenses are usually round, and lighting or other driving units are installed around the lens, so space is optimized through the application of a circular liquid crystal display. Through the development of this technology, an electrically switchable and space-optimized liquid crystal polarizer is developed.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.126-139
• /
• 2023

At present, naked-eye 3D appears more and more commonly on the facades of urban buildings. It brings an incredible visual experience to the audience by simulating the natural 3D 3D space effect. At the same time, it also creates enormous commercial value for city publicity and commercial advertisements. There is much research on naked-eye 3D visual effects, but for right-angle LED screens. Right-angle LED screen's brand-new expression method that has only become popular in recent years, how to convey a realistic naked-eye 3D effect through two LED screens combined at right angles has become a problem worth exploring. To explore the whole design ideas and production process of the naked-eye 3D impact of the right-angle LED screen, this paper is a preliminary study aimed at understanding the performance principle and expression features. Before the case analysis, first, understand the standard virtual 3D space construction techniques. Combining it with the optical illusion phenomenon, according to the expression principle of the naked-eye 3D effect of the right-angle LED screen, it can be summarized into seven expressions: Shadow, Color contrast, Background structure line, Magnify object, Object out of bounds, Object floating, Fusion of picture and background. By analyzing the optical illusion phenomenon used in the case, we summarized the main performance characteristics of the naked eye 3D effect. The emergence of right-angle LED screens breaks the limitation of a single plane of optical illusion art, perfectly combines building facades with naked-eye 3D visual effects, and provides designers with a brand-new creative platform. Understanding its production principles and main expressive features can help designers enter this innovative platform better.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.5
• /
• pp.229-238
• /
• 2006

This paper shows the analytic error caused by the inconsistency of the approximation order between the non local boundary condition (NLBC) and the parabolic governing equation. To obtain the analytic error, we first transform the NLBC to the half space domain using plane wave analysis. Then, the analytic error is derived on the boundary between the true numerical domain and the half space domain equivalent to the NLBC. The derived analytic error is physically expressed as the artificial reflection. We examine the characteristic of the analytic error for the grazing angle, the approximation order of the PE or the NLBC. Our main contribution is to present the analytic method of error estimation and the application limit for the high order parabolic equation and the NLBC.

• Communications of the Korean Mathematical Society
• /
• v.39 no.3
• /
• pp.693-715
• /
• 2024

Let n ∈ ℕ, n ≥ 2. An element (x₁, . . . , x_n) ∈ Eⁿ is called a norming point of T ∈ 𝓛(ⁿE) if ||x₁|| = ··· = ||x_n|| = 1 and |T(x₁, . . . , x_n)| = ||T||, where 𝓛(ⁿE) denotes the space of all continuous n-linear forms on E. For T ∈ 𝓛(ⁿE), we define Norm(T) = {(x₁, . . . , x_n) ∈ Eⁿ : (x₁, . . . , x_n) is a norming point of T}. Norm(T) is called the norming set of T. Let $0{\leq}{\theta}{\leq}{\frac{{\pi}}{4}}$ and ${\ell}^2_{{\infty},{\theta}}={\mathbb{R}}^2$ with the rotated supremum norm $${\parallel}(x,y){\parallel}_{({\infty},{\theta})}={\max}\{{\mid}x\;cos\;{\theta}+y\;sin\;{\theta}{\mid},\;{\mid}x\;sin\;{\theta}-y\;cos\;{\theta}|\}$$. In this paper, we characterize the norming set of T ∈ 𝓛(ⁿℓ²_(∞,θ)). Using this result, we completely describe the norming set of T ∈ 𝓛_s(ⁿℓ²_(∞,θ)) for n = 3, 4, 5, where 𝓛_s(ⁿℓ²_(∞,θ)) denotes the space of all continuous symmetric n-linear forms on ℓ²_(∞,θ). We generalizes the results from [9] for n = 3 and ${\theta}={\frac{{\pi}}{4}}$.