• Electronics and Telecommunications Trends
• /
• v.34 no.1
• /
• pp.142-153
• /
• 2019

In this paper, we focus on the process of using open source software (OSS) and factors that should be considered when using project-based OSS. We also elaborate on how to avoid using OSS licenses in an OSS-based technology development process, why dual OSS licenses and security threats should be avoided, and the method of notification after use. In addition, the OSS license verification method and environment are described in the course of project development. In the verification method, the OSS license used for technology development in the course of project execution is validated in advance by the person who decides whether or not to use the OSS, and then additional verification using the tool after technology development. It is expected that this paper will be helpful for establishing the OSS usage consideration and the license verification procedure, and environment in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.57-58
• /
• 2014

Digital filter is very important role in signal processing system. In general, input signal is determined by transfer function of the digital filter. But if input signal was exposured in various sound environment, it is difficult to verify its original source. In this paper, inverse problem in order to extract original input signal from noisy environment is considered.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.841-847
• /
• 2011

In this study, a method to determine the design capacities of nonpoint source (NPS) pollutant treatment facilities in urban areas was suggested. A facility capacity to treat 80 percent of total SS discharge was estimated by 2-year rainfall - runoff - build-up and wash-off simulation at Goonja drainage district in Seoul. For wash-off simulation, four wash-off models (EMC, RC, EXP, and Joo model) were used. As the results, 80 percent of total SS discharge could be treated with only 7.7~31.4% facility capacity of peak flow. The suggested method and results will provide a guideline to determine design capacities of NPS pollutant treatment facility in urban areas.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1997.06a
• /
• pp.68-74
• /
• 1997

Ship radiated noise is an infortant parameter which dtermines Anti Submarine Warfare(ASW) countermeansure or passive Sonar detection and classification performance. Its measurement should be performed under controlled ocean acoustic environment. In data reduction of the measured data from hydrophone array, theeffect fo ambient noise, surface reflection and bottom reflection etc. should be compensated to obtain the source level of the ship radiated noise. This study describes the measurement hydrophone array design criteria based on the analysis of transimission anomaly due to the surface reflection.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.291-293
• /
• 2000

대기 연구자들은 대기오염의 일반적인 현황과 대기오염 유발의 근본 원인 파악, 저감 대책 등에 대한 연구를 활발히 수행하고 있다 하지만 이러한 연구들 중에서 대기오염의 근본 원인을 파악하기 위한 오염원 (Source) 추정 연구는 국내외적으로 매우 미진하다. 대기질의 평가와 예측은 분산모델과 수용방법론을 이용하는데, 분산모델에 내재되어 있는 한계성과 제약점 때문에 수용체에서 오염물질의 특성을 분석한 후, 오염원의 기여도를 평가하는 수용방법론이 지속적으로 개발되고 있다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.33-34
• /
• 2000

수용모델을 이용하기 위하여 배출원을 추정하는 방법으로는 측정지점에 영향을 미치는 배출원에 대한 성분조사가 무엇보다 필요하다. 이들은 배출원 구성물질 성분비(source fingerprint)로서 외국의 경우는 연구가 활발히 진행되고 있으나 국내의 경우는 전무한 실정이다. 따라서 본 연구에서는 VOCs 오염원에 대한 기여도를 파악하기 위해 VOCs 농도에 영향을 미치는 주요 배출원인 자동차, 주유소, 도장시설, 저유소 및 출하시설, 세탁소, 도로포장 등을 대상으로 조사하였으며, 이들 자료들에 대하여 각 배출원별 성분비를 구하였다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.318-319
• /
• 2002

대기 중으로 배출되는 휘발성 유기화합물 (VOCs)은 인체에의 유해성 및 2차 오염물질의 생성 등에 많은 악영향을 미치고 있는 것으로 알려지고 있다. 최근에는 이들의 대한 원인물질, 정확한 발생량 및 기여의 정도를 파악하기 위한 연구가 미국-을 중심으로 국·내외적으로 광범위하게 수행되고 있다. 하지만 우리나라의 경우 이들에 대한 연구가 극히 저조한 실정인데 그 이유는 미량 VOCs 측정자체가 난해하고 비용 또한 많이 들기 때문이다. (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.371-376
• /
• 1996

효율적인 진동환경관리를 위해 GIS Software를 사용하여 개발된 진동환경관리시스템(Vibration Management System : VMS)을 점진동원과 선진동원에서의 진동관리에 적용하였다. 점진동원에 의한 진동관리를 위해서는 발파진동을 예로 들었으며, 선진동원의 경우는 지하철 운행시의 교통진동에 의한 인근지역에서의 진동환경을 분석하였다.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.6
• /
• pp.809-817
• /
• 2008

Program plagiarism is widespread due to intelligent software and the global Internet environment. Consequently the detection of plagiarized source code and software is becoming important especially in academic field. Though numerous studies have been reported for detecting plagiarized pairs of codes, we cannot find any profound work on understanding the underlying mechanisms of plagiarism. In this paper, we study the evolutionary process of source codes regarding that the plagiarism procedure can be considered as evolutionary steps of source codes. The final goal of our paper is to reconstruct a tree depicting the evolution process in the source code. To this end, we extend the well-known bioinformatics approach, a local alignment approach, to detect a region of similar code with an adaptive scoring matrix. The asymmetric code similarity based on the local alignment can be considered as one of the main contribution of this paper. The phylogenetic tree or evolution tree of source codes can be reconstructed using this asymmetric measure. To show the effectiveness and efficiency of the phylogeny construction algorithm, we conducted experiments with more than 100 real source codes which were obtained from East-Asia ICPC(International Collegiate Programming Contest). Our experiments showed that the proposed algorithm is quite successful in reconstructing the evolutionary direction, which enables us to identify plagiarized codes more accurately and reliably. Also, the phylogeny construction algorithm is successfully implemented on top of the plagiarism detection system of an automatic program evaluation system.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1524-1531
• /
• 2020

The aim of this work is to develop a Geiger-Muller (GM) detector system for robot to look for a radioactive source in case of a nuclear emergency or in a high radiation environment. In order to find a radiation source easily, a detector system, including 3 detectors, was designed to search γ-ray radiation sources autonomously. First, based on GEANT4 simulation, radiation dose rates in 3 Geiger-Muller (GM) counters were simulated at different source-detector distances, distances between detectors and angles. Various sensitivity analyses were performed experimentally to verify the simulated designed detector system. A mono-energetic ¹³⁷Cs γ-ray source with energy 662 keV and activity of 1.11 GBq was used for the observation. The simulated results were compared with the experimental dose rate values and good agreements were obtained for various cases. Only based on the dose rates in three detectors, the radiation source with a specific source activity and angle was localized in the different location. A method was adopted with the measured dose rates and differences of distances to find the actual location of the lost γ-ray source. The corresponding angles of deviation and detection limits were calculated to determine the sensitivity and abilities of our designed detector system. The proposed system can be used to locate radiation sources in low and high radiation environments.