DOI QR코드

DOI QR Code

Determination of Design Capacity for NPS Pollutant Treatment Facilities by Long-term Simulation in Urban Areas

장기모의를 통한 도시유역 비점오염원 처리장치 용량 산정

  • Joo, Jingul (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Yoo, Doguen (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Kim, Joonghoon (School of Civil, Environmental and Architectural Engineering, Korea University)
  • 주진걸 (고려대학교 건축 사회환경공학부) ;
  • 유도근 (고려대학교 건축 사회환경공학부) ;
  • 김중훈 (고려대학교 건축 사회환경공학부)
  • Received : 2011.08.20
  • Accepted : 2011.10.21
  • Published : 2011.11.30

Abstract

In this study, a method to determine the design capacities of nonpoint source (NPS) pollutant treatment facilities in urban areas was suggested. A facility capacity to treat 80 percent of total SS discharge was estimated by 2-year rainfall - runoff - build-up and wash-off simulation at Goonja drainage district in Seoul. For wash-off simulation, four wash-off models (EMC, RC, EXP, and Joo model) were used. As the results, 80 percent of total SS discharge could be treated with only 7.7~31.4% facility capacity of peak flow. The suggested method and results will provide a guideline to determine design capacities of NPS pollutant treatment facility in urban areas.

Keywords

References

  1. 강용태, 한상윤, 전종규(2007). 초기강우에 의한 공업지역내의 비점오염원 유출특성에 관한 연구. 한국수처리학회지, 15(1), pp. 59-68.
  2. 김석구, 김영임, 윤상린, 이용재, 김이호, 김종오(2004). 강우 강도에 따른 노면유출수의 유출 특성. 수질보전 한국물환경학회지, 20(5), pp. 494-499.
  3. 김이형, 강주현(2004a). 강우로 인해 고속도로로부터 유출되는 폐기물의 성상, 부하량 및 유출 특성. 수질보전 한국물환경학회지, 20(5), pp. 415-421.
  4. 김이형, 강주현(2004b). 강우시 발생하는 고속도로 유출수의 초기우수 특성 및 기준. 수질보전 한국물환경학회지, 20(6), pp. 641-646.
  5. 김진관(2006). 유역개발에 따른 비점오염원의 적정처리용량 결정. 박사학위논문, 고려대학교.
  6. 노성덕, 이대근, 전양근(2004). 도로상의 비점오염물질 저감을 위한 초기 우수유출수 처리에 관한 연구. 수질보전 한국물환경학회지, 20(5), pp. 525-533.
  7. 도시홍수재해 관리기술 연구단(2007a). 도시홍수재해관리기술 연구(IV), R&D/03산학연 C01-01.
  8. 도시홍수재해 관리기술 연구단(2007b). 중랑천 수문자료집 2007, FFC06-03 도시홍수재해 관리기술 연구단기술보고서.
  9. 이준호, 조용진, 방기웅(2005). 강우시 도로유출수 수질특성 및 입경분포. 대한환경공학회지, 27(7), pp. 777-784.
  10. 정부합동(2000). 4대강 물관리 종합대책(1998-2000).
  11. 주진걸, 정동휘, 김중훈, 박무종(2010). 도시유역의 부유고형물 유출평가를 위한 쓸림모형 개발. 수질보전 한국물환경학회지, 26(5), pp. 789-795.
  12. 최지용, 신창민(1997). 도시지역 비점오염원 관리방안 연구, 한국환경정책평가연구원.
  13. 환경부(2006). 비점오염원관리업무편람.
  14. Alley, W. M. (1981). Estimation of impervious-area washoff parameters. Water Resources Research, 17(4), pp. 1161-1166. https://doi.org/10.1029/WR017i004p01161
  15. ASCE (1998). Urban Runoff Quality Management, Reston, Va.
  16. Barrett, M. E., Irich, Jr. L. B., Malina, J. F., and Charbeneau, R. J. (1998). Characterization of highway runoff in Austin, Texas, area. Journal of Environmental Engineering, 124(2), pp. 131-137. https://doi.org/10.1061/(ASCE)0733-9372(1998)124:2(131)
  17. Calabro, P. S. (2004). Design storms and water quality control. Journal of Hydrologic Engineering, 9(1), pp. 28-34. https://doi.org/10.1061/(ASCE)1084-0699(2004)9:1(28)
  18. Chiew, F. and McMahon, T. A. (1999). Modelling runoff and diffuse pollution loads in urban areas. Water Science and Technology, 39, pp. 241-248.
  19. Coombes, P. J. (2002). Rainwater Tanks Revisited: New Opportunities for Urban Water Cycle Management. Ph.D. thesis, University of Newcastle, Australia.
  20. DHI (2002). MOUSE Surface Runoff Models Reference Manual. DHI Software, Horsolm, Denmark.
  21. Drapper, D., Tomlinson, R., and Williams, P. (2000). Pollutant concentration in road runoff: Southeast Queensland case study. Journal of Environmental Engineering, 126(4), pp. 313-320. https://doi.org/10.1061/(ASCE)0733-9372(2000)126:4(313)
  22. Elliott, A. H. and Trowsdale, S. A. (2007). A review of models for low impact urban stormwater drainage. Environmental Modelling & Software, 22, pp. 394-405. https://doi.org/10.1016/j.envsoft.2005.12.005
  23. Furumai, H., Balmer, H., and Boller, M. (2002). Dynamic behavior of suspended pollutants and particle size distribution in highway runoff. Water Science and Technology, 46(11-12), pp. 413-418.
  24. Gobel. P., Dierkes, C., and Coldewey, W. G. (2007). Storm water runoff concentration matrix for urban areas. Journal of Contaminant Hydrology, 91, pp. 26-42. https://doi.org/10.1016/j.jconhyd.2006.08.008
  25. Grottker, M. (1987). Runoff quality from a street with medium traffic loading. The Science of the Total Environment, 59, pp. 457-466.
  26. Huber, W. C. and Dickinson, R. E. (1992). Storm Water Management Model, Version 4 : User's manual, EPA/600/3-88/001a, Environmental research laboratory, W.S. Environmental Protection Agency, Athens, GA, October.
  27. Kim, L. H., Ko, S. O., Jeong, S. M., and Yoon, J. Y. (2007). Characteristics of washed-off pollutants and dynamic EMCs in parking lots and bridges during a storm. Science of the Total Environment, 376, pp. 178-184. https://doi.org/10.1016/j.scitotenv.2006.12.053
  28. Mitchell, V. G., Diaper, C., Gray, S. R., and Rahilly, M. (2003). UVQ: Modelling the movement of water and contaminants through the total urban water cycle. In: 28th International Hydrology and Water Resources Symposium, Wollongong, NSW. Institution of Engineers, Australia.
  29. Nakamura, E. (1984). Factors affecting the removal rate of street surface contaminants by overland flow. Journal of Research, 24, pp. 1-24.
  30. Palmstrom, N. and Walker, W. W., Jr. (1990). P8 urban catchment model: User''s guide. Program documentation, and evaluation of existing models, design concepts, and Hunt-Potowomut data inventory. The Narragansett Bay Project Report No. NBP-90-50.
  31. Pitt, R. (1998). Unique features of the Source Loading and Management Model (SLAMM). In: W. James (ed.), Modeling the Management of Stormwater Impacts, 6. Computational Hydraulic International, Guelph, Ontario, pp. 13-35.
  32. Sartor, J. D. and Boyd, G. B. (1972). Water pollution aspects of street surface contaminants, EPA-R2-72-081(NTIS PB-214408), Environmental Protection Agency, Washington, DC, November 1972.
  33. Sartor, J. D., Boyd, G. B., and Agrdy, F. J. (1974). Water pollution aspects of street surface contaminants. Water Pollution Control Federation, 46(3), Part 1, pp. 458-467.
  34. Soonthornnond, P., Christensen, E. R., Liu, Y., and Li, J. (2008). A washoff model for stormwater pollutants. Science of the Total Environment, 402, pp. 248-256. https://doi.org/10.1016/j.scitotenv.2008.04.036
  35. Wu, J. S., Allan, C. J., Saunders, L., and Evett, J. B. (1998). Characterization and pollutant loading estimation for highway runoff. Journal of Environmental Engineering, 124(7), pp. 584-592. https://doi.org/10.1061/(ASCE)0733-9372(1998)124:7(584)
  36. Zhang, W., Keller, A. A., and Wang, X. (2009). Analytical modeling of polycyclic aromatic hydrocarbon loading and transport via road runoff in an urban region of Beijing, China. Water Resources Research, 45, W01423.
  37. Zoppou, C. (2001). Review of urban storm water models. Environmental Modelling and Software, 16, pp. 195-231. https://doi.org/10.1016/S1364-8152(00)00084-0