• Membrane Journal
• /
• v.31 no.3
• /
• pp.228-240
• /
• 2021

The organic solvent robust polybenzimidazole (PBI) membranes were prepared as organic solvent nanofiltration (OSN) membrane for the recycling of alcoholic solvents using non-solvent induced phase separation with different dope solution concentration and coagulant composition of water/ethanol mixtures to control the membrane morphology and permeation performance. Investigation on crosslinking of polybenzimidazole indicated that the membrane crosslinked with dibromoxylene (DBX) had enough mechanical strength and solvent resistance to be applied as a OSN membranes. The crosslinked PBI membrane prepared by more than 20wt% dope concentration coagulated in water showed a rejection of > 90% to Congo Red (MW of 696.66 g/mol) while pure ethanol permeances was more than 22.5 LMH/bar at 5 bar. Investigation on coagulant composition indicated that ethanol permeance through crosslinked PBI OSN membrane increased with increasing of ethanol concentration in water/ethanol mixture coagulants.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.192-192
• /
• 2009

We have successfully demonstrated the inkjet printing process to fabricate $Al_2O_3$ thick films without a high temperature sintering process. A single solvent system had a coffee ring pattern after printing of $Al_2O_3$ dot, line and area. In order to fabricate the smooth surface of $Al_2O_3$ thick film, we have introduced a co-solvent system which has nano-sized $Al_2O_3$ powders in the mixture of Ethylene glycol monomethyl ester and Di propylene glycol methyl ether. This co-solvent system approached a uniform and dense deposition of $Al_2O_3$ powders on the substrate. The packing density of inkjet-printed $Al_2O_3$ films is more than 70% which is very high compared to the value obtained from the films synthesized by other conventional methods such as casting processes. The characterization of the inkjet-printed $Al_2O_3$ films has been implemented to investigate its thickness and roughness. Also the dielectric loss of the films has been measured to understand the feasibility of its application to 3D integration package substrate.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.59-64
• /
• 2006

High $J_c\;YBa_2Cu_3O_x$ superconducting films were fabricated by MOD method using fluorine-free dichloroacetic acid(DCA) as chelating solvent for preparing precursor solution. Coating solutions were prepared by dissolving Y-, Ba- and Cu-acetates in DCA solvent followed by drying in rota vapor to obtain the blue gel that is diluted in methanol and 2-methoxyethanol for adjusting the cation concentration. DCA-MOD precursor solution was coated on a single crystal(001) $LaAlO_3(LAO)$ substrate by a dip coating method with a speed of 25 mm/min. Coated films were calcined at lower temperature up to $500^{\circ}C$ in flowing oxygen atmosphere with a 7.2% humidity. Conversion heat treatment was performed at various temperatures of $780{\sim}810^{\circ}C$ for 2 h in flowing Ar gas containing 1000 ppm oxygen with a humidity of 9.45%. SEM observations showed that films have very dense microstructures for the films prepared at the temperature higher than $800^{\circ}C$ regardless of diluting solvent; methanol or 2-methoxyethanol. X-ray diffraction analysis showed that YBCO grains grew with a (001) preferred orientation. A High critical current density($J_c$) of 1.28 $MA/cm^2$(@77 K and self-field) was obtained id. the YBCO film prepared using 2-methoxyethanol as a solvent.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.73-78
• /
• 2015

The autoignition temperatures(AIT) of solvent mixture is important index for the safe handling of flammable liquids which constitute the solvent mixtures. Therefore, the AITs of common pure chemical substances are widely reported, but very limited data are available for mixtures. This study, the toluene and 2-butnaol system which used mixture solution solvent was measured the AIT and ignition delay time by using ASTM E659 apparatus. The AITs of toluene and 2-butanol constituted binary system were $547^{\circ}C$ and $400^{\circ}C$, respectively. The experimental AIT of toluene and 2-butanol were a good agreement with the calculated AIT by the proposed equations with a few average absolute deviation(A.A.D.).

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3429-3432
• /
• 2011

Distribution diagram of $FeCl_2$ in HCl solution indicated that $FeCl^+$ was a predominant species in strong HCl solution up to 10 M. Solvent extraction of $FeCl_2$ has been performed in the HCl concentration range from 5 to 9 M by using Alamine336 as an extractant. Interaction parameter of $FeCl^+$ for Bromley equation was estimated from our solvent extraction data. This parameter thus obtained in our study can be employed in calculating the activity coefficient of $FeCl^+$ in high concentration of HCl.

• The Journal of Natural Sciences
• /
• v.9 no.1
• /
• pp.169-175
• /
• 1997

In this study, it was investigated about dyeability, light-fastness, wash-fastness and tensile strength in PET fiber using the effective carrier solvent such as benzyl alcohol, benzaldehyde and acetophenone. As a results, dyeability in mixed solvent was better than that of single solvent. And dyeability in mixed solvents of benzyl aldehyde and acetophenone was of them. But effective carrier action was resulted in decrease of properties such as light-fastness and tensile strength of PET fiber after dyeing.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.7
• /
• pp.1526-1530
• /
• 2009

Solvent extraction reaction of Zn(II) by Alamine336 from strong HCl solution up to 10 M was identified by analyzing the data reported in the literature. The equilibrium constant of this reaction was estimated by considering the complex formation between zinc and chloride ion. The necessary thermodynamic parameters, such as equilibrium constant for the formation of complexes and the interaction parameters, were evaluated from the thermodynamic data reported in the literature. The following solvent extraction reaction and the equilibrium constant was obtained by considering the activity coefficients of solutes present in the aqueous phase with Bromley equation. $Zn^{2+}\;2Cl^{-}\;+\;R_3NHCl_{org}\;=\;ZnCl_3R_3NH_{org},\;K_{ex}\;=\;6.33\;{\times}\;10^2$ There was a good agreement between measured and calculated distribution coefficients of Zn(II).

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.1016-1023
• /
• 1994

In process of manufacturing acrylonitrile azeotrope of acetonitrile-water was come into being as by-product. For the purpose of recovering acetonitrile through solvent extraction process benzene, toluene, o-xylene, ethylacetate and monochlorobenzene as solvents were selected in order to separate acetonitrile from azeotrope of acetonitrile-water. In this study liquid-liquid equilibrium data were determined and consistency of the experimental data was investigated. The tie line and plait point for solvent(1)-water(2)-acetonitrile(3) system were determined at $25^{\circ}C$. The parameters in the NRTL, UNIQUAC and modified UNIQUAC model were predicted, distribution coefficient and selectivity of each solvent were determined respectively.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.887-896
• /
• 2011

We investigated the effects of a gate dielectric and its solvent on the characteristics of top-gated organic field-effect transistors (OFETs). Despite the rough top surface of the inkjet-printed active features, the charge transport in an OFET is still favorable, with no significant degradation in performance. Moreover, the characteristics of the OFETs showed a strong dependency on the gate dielectrics used and its orthogonal solvents. Poly(3-hexylthiophene) OFETs with a poly(methyl methacrylate) dielectric showed typical p-type OFET characteristics. The selection of gate dielectric and solvent is very important to achieve high-performance organic electronic circuits.

• Journal of Applied Biological Chemistry
• /
• v.65 no.4
• /
• pp.453-456
• /
• 2022

Phragmites communis rhizome (Phragmitis rhizoma) was extracted with 70% ethanol, and then the extract was fractionated sequentially using n-hexane, chloroform, and ethyl acetate as solvents. Among the solvent fractions of Phragmitis rhizoma extract, the polyphenol content in ethyl acetate fraction was the highest. The chloroform and ethyl acetate fractions possessed a good nitrite scavenging activity. In addition, each solvent fraction showed an effective lipid peroxidation inhibitory ability at a concentration of 10 mg/mL.