• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.231-240
• /
• 2023

This empirical analysis investigates the impact of consultant competency and project manager (PM) competency on business performance. Two hundred and twenty four chief executive officers and executive members at small and medium sized firms in the manufacturing sector were surveyed, yielding several outcomes. First, consultant competency positively affects consulting performance. Second, consultant competency positively affects business performance. Third, PM competency does not have a significant influence on consulting performance. Fourth, PM competency does not have a significant impact on business performance. Fifth, consulting performance does not have a significant effect on business performance. Finally, regarding the mediation effect of consulting performance on the influence of consultant competency and PM competency on business performance, consulting performance had no significant impact. Thus, expertise and insight are crucial for a consulting business to enable the growth of professional consultants. Furthermore, this study is expected to enhance the consulting performance of small and medium sized manufacturing firms by providing useful data to consultants and project managers when carrying out consulting projects.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.347-350
• /
• 2016

소프트웨어의 취약점분석에 대한 위험이 발생하고 있다. 소프트웨어의 취약점을 통해 물질적, 금전적인 피해가 발생함에 따라 보안강화의 중요성이 대두되고 있다. 위험잠재요소가 있는 소프트웨어를 사용하는 경우 제조한 기업뿐만이 아닌 해당 소프트웨어를 사용하는 기업 및 개인까지 손실의 위험이 크기 때문에 본 논문에서는 소프트웨어의 취약점을 진단하고, 진단원을 양성하는 교육과정과 진단가이드를 제시하며, 소프트웨어의 취약점 보안성 강화방식을 제안하고자 한다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.219-226
• /
• 2000

Frictional performance of ring pack in internal engine is investigated by varying spatial dimensions of ring pack and operating speed. This investigation is performed with commercial software by Ricardo Consultant Engineers, Inc. which is now in wofdwide use in automobile industries. Among the ring performances, blow-by rate, axial ring motions and frictional behaviors of top and second rings are studies in our work.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.227-236
• /
• 2000

The secondary motion of piston greatly influences the dynamic and frictional performances of an engine. The motion is very related to the clearance, sliding velocity and skirt profile, etc. In our work, piston dynamics is analyzed with the commercial analysis software, PISDYN by Ricardo Consultant Engineers, Inc. The effects of profiles with piston pin offsets are studied regarding the secondary motion of piston and several results are compared.

• Communications for Statistical Applications and Methods
• /
• 제5권2호
• /
• pp.353-359
• /
• 1998

Factorial designs with two-level factors represent the smallest factorial experiments. The system of notation and confounding and fractional factorial schemes developed for the $2^N$system are found in standard textbooks of experimental designs. Just as in the $2^N$ system, the general confounding and fractional factorial schemes are possible in $3^N,5^N$, .... , and $\rho^N$ where $\rho$ is a prime number. Hence, we have the $\rho^N$ system. In this article, the author proposes a new algorithm for constructing fractional factorial plans in the $\rho^N$ system.

• 한국정보통신학회논문지
• /
• 제21권5호
• /
• pp.945-950
• /
• 2017

소프트웨어의 취약점으로 인하여, 국가의 사이버 인프라와 실물 금융자산 에 대한 해킹 공격이 발생하고 있다. 소프트웨어는 인터넷 정보제공과 사이버 금융결제 및 사이버 인프라를 통제하고 운영하는, 운영체제 및 실행시스템을 구성하는 필수요소이기 때문이다. 이러한 소프트웨어 취약점을 분석하고, 보안성을 강화해야 사이버 인프라의 보안성이 강화되고, 실제 국가와 국민의 실제 생활에 보안성이 강화된다. 소프트웨어 개발보안 제도 분석과 소프트 웨어 개발보안 진단 분석 및 소프트웨어 취약점의 보안성 강화를 위한 연구를 한다. 또한 소프트웨어 취약점 진단원 양성 및 보수교육을 위한 교재개발과 진단원 시험문제 개발 및 진단원의 파일럿 테스트, 그리고 진단원의 투입인력 비용기준을 연구한다. 본 논문의 연구는 소프트웨어 취약점 진단원을 양성하는 교육과정과 진단가이드를 제시하여, 국가와 국민 생활의 사이버 인프라의 소프트웨어 보안성을 강화하는 데 목적이 있다.

• Journal of Information Technology Applications and Management
• /
• 제9권1호
• /
• pp.1-26
• /
• 2002

ERP is the key-enabler of enterprise's informatization. Seletion of a right ERP system is one of the critical issues. Previous study shows that since a very few methodologies of selecting ERP systems are provided, most of companies have difficulty in Implementing ERP system. The purpose of this study is to analyze the characteristics of ERP system selection factors and develop the ERP evaluation methodology An empirical study is performed and shows that there are signigicant differences in ERP selection factors among ERP consultant, ERP developer, and system manager. The result shows that five factors such as general characteristics of software and supplier, technology characteristics of software and supplier, and Project management shills are significant. Based on the five factors, the evaluation methodology is developed. The methodology will help enterprises to make better decision in selecting ERP systems.

• 한국환경복원기술학회지
• /
• 제8권3호
• /
• pp.33-42
• /
• 2005

The bearing methods using pile of steel itself or reinforced concrete has been applying which in excavated depth was not deep. Also, the retaining wall as resisting structure to lateral force has taken weakness that the cure periods of concreted is long. Recently, with the material cost of steel, the application of cement is more increasing trend. In this study, the design methods of earth retaining and retention wall within the pre-casted concrete pile, PHC(Pretentioned spun High strength Concrete piles), was proposed which in the ground condition of excavated depth was not deep. The typical ground conditions, cohesive and non-cohesive soil, was considered as follows; soil strength as internal friction angle and UU(Undrained Unconsolidation triaxial test) strength, soil reaction and stabilization of structures. The application of design methods could be confirmed through the comparing and analyzing between measured data and utility software for the design.

• 한국문헌정보학회지
• /
• 제27권
• /
• pp.183-214
• /
• 1994

The purpose of this study is to suggest the schemes to enhance information service functions by the utilization of CD-ROM in medical school libraries. The results of the study are summarized as follows : 1. The selection and evaluation of CD-ROM database are necessary steps in the planning of a CD-ROM. Before the CD-ROM is selected, therefore, medical libraries must make a practical evaluation criteria in important order of information services environment, characteristics of hardware/software, service requirements, price and cost, etc. 2. If possible, CD-ROM MEDLINE must be suited for the information services environment. 3. In case of the popular core journals, full-text CD-ROM should be gradually purchased. 4. In order to reduce the time required from search of bibliographic informations to receipt of original articles, CD-NET system and library holding administration program must be built up and developed. And channel of information search and order/receipt of original article should be varied. 5. Search education program for medical librarians and users should be enforced, and librarians must play an important role in CD-ROM retrieval consultant and intermediator.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1041-1041
• /
• 2001

Removal of variability in spectra data before the application of chemometric modeling will generally result in simpler (and presumably more robust) models. Particularly for sparsely sampled data, such as typically encountered in diode array instruments, the use of Savitzky-Golay (S-G) derivatives offers an effective method to remove effects of shifting baselines and sloping or curving apparent baselines often observed with scattering samples. The application of these convolution functions is equivalent to fitting a selected polynomial to a number of points in the spectrum, usually 5 to 25 points. The value of the polynomial evaluated at its mid-point, or its derivative, is taken as the (smoothed) spectrum or its derivative at the mid-point of the wavelength window. The process is continued for successive windows along the spectrum. The original paper, published in 1964 [1] presented these convolution functions as integers to be used as multipliers for the spectral values at equal intervals in the window, with a normalization integer to divide the sum of the products, to determine the result for each point. Steinier et al. [2] published corrections to errors in the original presentation [1], and a vector formulation for obtaining the coefficients. The actual selection of the degree of polynomial and number of points in the window determines whether closely situated bands and shoulders are resolved in the derivatives. Furthermore, the actual noise reduction in the derivatives may be estimated from the square root of the sums of the coefficients, divided by the NORM value. A simple technique to evaluate the actual convolution factors employed in the calculation by the software will be presented. It has been found that some software packages do not properly account for the sampling interval of the spectral data (Equation Ⅶ in [1]). While this is not a problem in the construction and implementation of chemometric models, it may be noticed in comparing models at differing spectral resolutions. Also, the effects on parameters of PLS models of choosing various polynomials and numbers of points in the window will be presented.