• 한국건설안전학회 논문집
• /
• 제3권1호
• /
• pp.9-17
• /
• 2020

본 연구의 목적은 국내 건설현장에서 스마트건설기술의 원활한 도입을 위한 제도적 개선점을 분석하는 것이다. 이를 위해 다음과 같은 수행절차를 따른다. 첫째, 선행연구 고찰을 통하여 건설안전의 개념을 정의한다. 둘째, 건설재해 통계자료 분석 및 국내·외 선진국의 건설 안전관리 체계 및 제도를 분석한다. 셋째, 건설업 및 관련 산업의 스마트 안전기술의 적용 사례를 통해 스마트 안전 기술의 적용성을 고찰한다. 넷째, 기술 적용과 관련한 제도적 문제점 분석하고 정책 방향 및 개선점을 제시한다. 그 결과, 소규모 건설현장에서의 근로자 안전을 위한 기술의 추가적인 개발이 필요하다고 판단되며, 스마트 건설안전 체계를 위한 지속적인 정책적 지원이 필요하다고 분석된다. 본 연구의 결과는 스마트 건설기술의 적용을 위한 제도적 개선의 기초자료로 활용될 것이다.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.579-586
• /
• 2022

Modular building is a fast-growing construction method, mainly due to its ability to drastically reduce the amount of time it takes to construct a building and produce higher-quality buildings at a more consistent rate. However, while modular construction is relatively safer than traditional construction methods, workers are still exposed to hazards that lead to injuries and fatalities, and these hazards could be controlled using emerging smart technologies. Currently, limited information is available at the intersection of modular construction, safety risk, and smart safety technologies. This paper aims to investigate what aspects of modular construction are most dangerous for its workers, highlight specific risks in its processes, and propose ways to utilize smart technologies to mitigate these safety risks. Findings from the archival analysis of accident reports in Occupational Safety and Health Administration (OSHA) Fatality and Catastrophe Investigation Summaries indicate that 114 significant injuries were reported between 2002 and 2021, of which 67 were fatalities. About 72% of fatalities occurred during the installation phase, while 57% were caused by crushing and 85% of crash-related incidents were caused by jack failure/slippage. IoT-enabled wearable sensing devices, computer vision, smart safety harness, and Augment and Virtual Reality were identified as potential solutions for mitigating identified safety risks. The present study contributes to knowledge by identifying important safety trends, critical safety risk factors and proposing practical emerging methods for controlling these risks.

• 정보통신설비학회논문지
• /
• 제9권3호
• /
• pp.102-106
• /
• 2010

Recently process industries from oil and gas procedures and mining companies to manufactures of chemicals, foods, and beverages has been exploring the USN (Ubiquitous Sensor Networks) technology to improve safety of production processes. However, to apply the USN technology in the large-scale plant industry, reliability and security issues are not fully addressed yet, and the absence of the industrial sensor networking standard causes a compatibility problem with legacy equipment and systems. Although this situation, process industry such as energy plants are looking for the secure wireless plant solution to provide detailed, accurate safety monitoring from previously hard-reach, unaccordable area. In this paper, SPSF (Smart Plant Safety Framework based on Reliable-Secure USN) is suggested to fulfill the requirements of high-risk industrial environments for highly secure, reliable data collection and plant monitoring that is resistant to interference. The SPSF consists of three main layers: 1) Smart Safety Sensing Layer, 2) Smart Safety Network Layers, 3) Plant Network System Layer.

• 식품과학과 산업
• /
• 제54권2호
• /
• pp.73-81
• /
• 2021

스마트 HACCP을 통한 기록관리 자동화는 센서를 이용하여 중요관리점(CCP) 모니터링을 함으로써 한계기준 이탈 여부를 실시간으로 확인할 수 있으며 알람기능 구현을 통해 개선조치에 이르기까지의 소요시간을 단축시킬 수 있다. 식품업체의 HACCP 업무운영 효율성·편의성을 향상시킴과 동시에 제조공정의 자동화를 통해 수작업에 대한 병원성미생물의 교차오염도를 효율적으로 관리가 가능하여 식품산업의 경쟁력을 향상시킬 수 있다. 또 종사자의 비의도적 실수와 데이터 위·변조를 방지할 수 있게 해 소비자에게 식품안전에 대한 보다 신뢰성 높은 믿음을 줄 수 있다. 이렇듯 스마트 HACCP은 정부·기업·소비자 모두에게 공공의 이익을 가져다줄 새로운 미래이다.

• 한국가스학회지
• /
• 제23권5호
• /
• pp.8-14
• /
• 2019

국내 도시가스 보급률은 크게 성장했지만, 국내 가스계량기 계량·안전점검·요금 분야는 아직 서비스 초기방식에서 벗어나지 못하고 있다. 스마트가스미터에 관한 개발과 연구가 활발히 이루어지고 있지만 스마트가스미터의 도입에는 신뢰성과 안전성을 검증할 수 있는 합리적인 성능평가 방안과 기준이 필요하다. 본 논문은 스마트가스미터의 성능을 시험하기 위한 성능시험 시작품을 제작하고 시작품의 실증 운용을 통해 성능평가 방안을 최적화하여 국내에 스마트가스미터가 원활하게 확대/보급될 수 있도록 하는 것을 목적으로 한다.

• 품질경영학회지
• /
• 제50권4호
• /
• pp.679-700
• /
• 2022

Purpose: Smart lighting adjusts brightness and color temperature according to weather, the user's activity, mood, etc. This study performed user experience(UX) evaluation of smart lighting in a living lab. The purpose of evaluating UX and analyzing the evaluation results is to improve user-friendliness and market competitiveness of smart lighting Methods: A living lab is a virtual or physical space where various stakeholders participate to develop, verify, and evaluate products, services, or systems in a real-life environment. In this study, an environment of using smart lighting was established in the Smart Safety Living Lab. Subjects performed UX evaluation after interacting freely with smart lighting in the Smart Safety Living Lab. Results: As a result of UX evaluation, it was confirmed that UX was overall excellent and subjects were satisfied with setting a desired indoor mood through smart lighting. However, operating the switch of smart lighting may be difficult due to its complexity, and it is needed to improve some functionalities such as the brightness range provided by smart lighting. Conclusion: This study is expected to contribute to establishing the way of UX improvement of smart lighting. This study is also expected to contribute to developing smart lighting as a high-quality product by reflecting the subjects' needs and UX derived in a real-life environment.

• 융합신호처리학회논문지
• /
• 제24권2호
• /
• pp.82-89
• /
• 2023

선박 구조 특성상 격실 구조는 복잡하고 협소하여 작업 과정에서 안전사고가 빈번히 발생하고 있다. 사고의 주된 원인은 구조물 충돌, 낙하물, 독성물질 누출, 화재, 폭발, 질식 등이 존재한다. 사고 발생 시 작업자의 현장 상황을 파악하는 것이 피해를 완화하는 요소 중 하나이다. 이에 안전성을 확보하기 위해 선박 내 CCTV로 현장 상황을 모니터링하고 있으나, 기존의 방식으로는 사고를 예방하기엔 어려움이 있다. 이를 해결하기 위해 안전 기술로 위치 식별, 음성/영상 통신 기능이 탑재되는 스마트 안전모가 개발 중에 있다. 또한, 작업 구역 내 환경 정보 수집 및 저장기능을 포함한 온도, 습도, 진동, 소음, 기울기(자이로 센서), 가스 센서를 사용하여 스마트 안전모를 착용한 작업자에게 위험 상황을 알릴 수 있다. 이를 통해 스마트 안전모 및 환경 센서의 사용으로 선박 내 작업자의 안전성을 강화할 수 있을 것이다.

• 한국멀티미디어학회논문지
• /
• 제23권12호
• /
• pp.1507-1518
• /
• 2020

Recently, as the proportion of the elderly population in Korea has increased rapidly, it has entered an aging society. As the scope of social activities of the elderly increases, the risk of safety accidents is also increasing. The traffic accident rate of elderly pedestrians is higher than ordinary people. Although various smart devices for the elderly are researched and developed, electronic components are often used. Electronic devices may not be able to be used if charging is not regularly. In this paper, a smart hat, a smart system for the elderly and the weak, was implemented using solar panels. The system uses solar energy to provide reliable use of smart devices. It is believed to be helpful not only for the elderly but also for the weak people by easy to wear the hat.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.968-978
• /
• 2017

Three small-break loss-of-coolant accident (SBLOCA) tests with safety injection pumps were carried out using the integral-effect test loop for SMART (System-integrated Modular Advanced ReacTor), i.e., the SMART-ITL facility. The types of break are a safety injection system line break, shutdown cooling system line break, and pressurizer safety valve line break. The thermal-hydraulic phenomena show a traditional behavior to decrease the temperature and pressure whereas the local phenomena are slightly different during the early stage of the transient after a break simulation. A safety injection using a high-pressure pump effectively cools down and recovers the inventory of a reactor coolant system. The global trends show reproducible results for an SBLOCA scenario with three different break locations. It was confirmed that the safety injection system is robustly safe enough to protect from a core uncovery.

• 한국안전학회지
• /
• 제30권3호
• /
• pp.20-25
• /
• 2015

It is predicted the mass retirement of the post-war generation and the lack of young people according to reduces the recruitment. Therefore, industry fields are concerned by the low level of occupational safety and health from issued problem in a variety of industries; the charge of expanding business range/multi-functional, black box of technology, difficulty of systematic training, relative decrease in the skill of workers, loss of know-how in the field of information followed restricted site information. In response to these problems, it is necessary to establish the long-termly and actively based on for the adoption of a safety and health management techniques utilizing IT, which is digital assistant(tablet PC, PDA, etc.), RFID/USN/ICT, database systems, and etc. In this study, we developed and evaluated a worker's safety sensing apparatus using smart phone. The apparatus may be useful to prevent accidents in the construction industry as well as confined space work.