• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.746-751
• /
• 2006

The geumjunggu of the onchunchun which is the upper stream have been maintained as a too much picture to become a concrete lining about existing low flow channel and the reservoir water protecting banks for the reason of the flow of an upper stream steep slope and back of the shortage of the channel area in a suitableness interval. This research made a rating-curve to decide since to ensure against risks to the flood control through the undo of the rivers. And we found the speed of current of a nature undo interval and existing concrete interval and water level change out. A result from this natural disposition we must apply as a data for the research about the plan to be established in the rivers maintenance basis plan of onchunchun.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.333-336
• /
• 1991

In this paper, Hopfield & Tank model-like artificial neural network structure is proposed, which can be used for the optimal path planning problems such as the unit commitment problems or the maintenance scheduling problems which have been solved by the dynamic programming method or the branch and bound method. To construct the structure of the neural network, an energy function is defined, of which the global minimum means the optimal path of the problem. To avoid falling into one of the local minima during the optimization process, the simulated annealing method is applied via making the slope of the sigmoid transfer functions steeper gradually while the process progresses. As a result, computer(IBM 386-AT 34MHz) simulations can finish the optimal unit commitment problem with 10 power units and 24 hour periods (1 hour factor) in 5 minites. Furthermore, if the full parallel neural network hardware is contructed, the optimization time will be reduced remarkably.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.5
• /
• pp.55-63
• /
• 1996

The situation and cause of bund collapse in steep sloping paddy area by a heavy rainfall of Chungbuk Province were investigated by field surveys. Shapes of paddy plots are irregular and average size of them is 12.6a. Surface, groundwater and plot-to-plot irrigations are being carried out in the study plots. The type of bund collapse can be divided as follows: overflow type and inundation type. The overflow type generally occurs at the bund with slope lacking the design standard. The inundation type damages paddy plots more seriously than the overflow type. It induces continuous bund collapse from a inflow-plot to a outflow-plot and includes lots of type (inside paddy) collapse, which results in much subsoil erosion. The installation of mountain stream weir and maintenance of mountain stream are proposed to prevent the inundation type collapse.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.417-422
• /
• 2003

Rockfall mitigation methods have been widely constructed along railway lines but aren't estimated with any economic analysis methods up to now. Therefore, this study applied a benefit-cost analysis to rockfall mitigation method to determine whether it is indeed an economically efficient construction. The Benefits were estimated based on data collected from disaster history, and included three types of benefits that are originated by reduction of train accident, train delay and rockfall removing cost. The costs included both construction cost and the maintenance cost of the selected method. This analysis could clarify the investment effect of rockfall mitigation method that would be built at rockfall prone slope.

• Journal of Aerospace System Engineering
• /
• v.10 no.3
• /
• pp.9-14
• /
• 2016

Using a multiple regression analysis, a total of 78 low-Reynolds-number airfoils are examined in this paper to clarify the systematic relationships between the geometrical parameters of the airfoils and experimentally-determined aerodynamic coefficients. The results show that the effects of the maximum camber and the maximum thickness regarding the maximum lift and the stalling angle of attack, respectively, are major. The lower-surface flatness of the airfoil is also a crucial geometrical parameter for aerodynamic performance. It is proven here that, generally, the application of the regression equations for an assessment of the aerodynamic performance is relatively acceptable, along with an expectation that the lift-curve slope violates the normality assumption.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1349-1357
• /
• 2010

절토사면의 안정성은 1차적으로 사면 자체의 지반 구조에 의해서 결정되지만 2차적으로 강우와 강설에 의한 수리적인 요소의 영향을 받는다. 매 년 여름 집중호우 기간에 많은 사면들이 붕괴되는 사례를 볼 때, 수리적인 요소가 사면의 안정성에 큰 영향을 주는 것을 알 수 있다. 수리제어공법의 목적은 물이 배수될 수 있는 길을 만들어주는 것으로 그 목적은 매우 간단하다. 하지만 공법이 시공된 이후 강우와 강설로 인해 유입되는 토사, 낙엽이 관리 소홀로 도수로나 배수로를 막아 본래의 역할을 하지 못하는 경우가 대부분이다. 본 연구에서는 이와 같은 문제점으로 발생한 국내 사례를 통해 사면에 적용되는 수리제어공법들의 유지관리 개선방안에 대해 논의하고자 한다.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.1
• /
• pp.17-24
• /
• 2019

This study is to seek for the reuse of vacant houses in the old settlement of urban area, focused on the Andeokbeol in Cheongju city, Korea. The following results were derived. Firstly, the maintenance and reuse methods of vacant houses are made for a number of house type as well as a variety of locational characteristics(flatland, gentle and steep slope) of the Andeokbeol. Secondly, reuse plans of vacant houses are established for a variety of classes such as local residents, artist and youth activist around cultural complex(Cheongju old cigarette factory), and outsiders. Thirdly, owners, users and intermediaries of vacant houses should find a solution to the reuse of them in company with Andeokbeol residents. And also institutional and administrative support measures are established for reuse of vacant houses.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.4
• /
• pp.1-10
• /
• 2022

In this study, to evaluate the possibility of using a steel spring as a displacement-dependent damping device, tensile loading and cyclic loading tests were performed. The main experimental variables were the type of steel (SAE9254 and SS275), the spring constant (700 N/mm, 1,000 N/mm, and 1,400 N/mm), and the presence or absence of heat treatment for SAE9254. As a result of the tensile test, the ratios of the measured spring constant to the design spring constant of the steel springs made with SAE9254 ranged from 1.08 to 1.13, while the ratios of the design spring constant and the measured spring constant of the steel springs made with SS275 ranged from 0.86 to 0.97. After yielding, the slope values of the load-displacement curve of the SAE9254 with/without heat treatment were about 240~251 N/mm and 92 N/mm, respectively, but the slope values of the load-displacement response of SS275 were almost zero. According to the uniaxial cyclic loading test results, all specimens were satisfied with three conditions for a displacement-dependent damping device in KDS 41 17 00 (2019): the maximum force and minimum force at zero displacement, the maximum force and minimum force at the maximum displacement, and the energy dissipation capacity. In addition, the equivalent damping ratios of steel springs made with SAE9254(non-heat treatment) and SS275 were approximately 2.8 times and 1.9 times greater, respectively, than that of steel springs made with SAE9254.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.4
• /
• pp.73-80
• /
• 2022

This study evaluated changes in fluidity and rheological properties over time for 3D printed composite materials, and evaluated compressive strength and splitting tensile strength properties for laminated and molded specimens. The composite material for 3D printing starts to change rapidly after 30 minutes of extrusion, and the viscosity of the material tends to be maintained up to 90 minutes, but it was confirmed that construction within 60 minutes after mixing is effective. The compressive strength of the laminated test specimen showed equivalent or better performance at all ages compared to the molded test specimen. In the stress-strain curve of the laminated specimen, the initial slope was similar to that of the molded specimen, but the descending slope was on average 1.9 times higher than that of the molded specimen, indicating relatively brittle behavior. The splitting tensile strength of the P-V laminated specimen was about 6% lower than that of the molded specimen. It is judged that this is because the interfacial adhesion force against the vertical load is affected by the pattern direction of the laminated test specimen.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.40-48
• /
• 2023

In this paper, a sensor-based monitoring system was established to analyze the long-term behavioral characteristics of the caisson quay wall, a representative structural type in port facilities. Data was collected over a period of approximately 10 months. Based on existing literature, anomalous behaviors of port facilities were classified, and a measurement system was selected to detect them. Monitoring systems were installed on-site to periodically collect data. The collected data was transmitted and stored on a server through LTE network. Considering the site conditions, inclinometers for measuring slope and crack meters for measuring spacing and settlement were installed. They were attached to two caissons for comparison between different caissons. The correlation among measured data, temperature, and tidal level was examined. The temperature dominated the spacing and settlement data. When the temperature changed by approximately 50 degrees, the spacing changed by 10 mm, the settlement by 2 mm, and the slope by 0.1 degrees. On the other hand, there was no clear relationship with tidal level, indicating a need for more in-depth analysis in the future. Based on the characteristics of these collected database, it will be possible to develop algorithms for detecting abnormal states in gravity-type quay walls. The acquisition and analysis of long-term data enable to evaluate the safety and usability of structures in the event of disasters and emergencies.