• The Korean Journal of Community Living Science
• /
• v.24 no.4
• /
• pp.457-469
• /
• 2013

The purpose of this study is to quantitatively analyze the impacts of the distribution of easing contraction of the sleeve on the external appearance of bodice and sleeve through virtual clothing simulation. Virtual clothing is conducted by differentiating the sleeve easing in accordance with the experimental condition of bodice and sleeve that are followed by draping. And then the evaluation is carried out. As a result of an analysis of the similarity between the virtual garment and the actual clothing, the whole external appearance of the bodice and sleeve was expressed similarly. The external appearance according to the distribution of easing contraction got better as the easing contraction of sleeve was concentrated on sleeve cap in front while the appearance was better at the back as it was more gently distributed than in the front. In a comparison of armhole form, the clothing of which the top of it was most similar to S0 was S4 in which the gap between the armhole and the arm was the least and the front and rear silhouette fell relatively well. In a comparison between the position of bust circumference line and that of the sleeve base line, the front of the sleeve matched the bust circumference line as the easing contraction was distributed close to the center of the sleeve cap while in the back, the sleeve base line and the bust circumference line matched when some easing contraction ratio was added close to the armpit point. The cross section figures of garment space of the shoulder, the margin was evenly distributed in S4 or S5 with differing distributions of easing contraction in the front and the back. This study is significant in that it supplies the objective baseline data which makes a novice more able to make a good external appearance of the sleeve.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.11
• /
• pp.1502-1513
• /
• 2002

The purpose of this study was to find relations between construction factors and adaptability on the 5 available raglan sleeve patterns through the drafting method. Also it was to suggest a functional sleeve pattern according to appearance and adaptability test. Three women in her twenties who have standard figure was selected as subjects. Raglan sleeves of 5 experimental clothes were rated by the appearance test and adaptability test. The major conclusions of this study are as follows. 1. The construction factors of the raglan sleeve are sleeve slant, sleeve cap height, biceps line, breast width. Bicep lines increased and sleeve cap height decreased as the sleeve slant decreased. The higher adaptability scores of raglan sleeves were, the lower sleeve slants were. 2. According to the appearance evaluation, B type was recorded the highest score 3. According to the adaptability scores, A type was recorded the highest score. In the pulled length of the waist-line, A type was the lowest movements among the pattern type. In the pulled length of the sleeve-line, A type was the lowest movements among the pattern types. Therefore A type was evaluated by the bort functional sleeve pattern type. Through the experiments, it was known that appearance and adaptability of the raglan sleeve patterns were effected by construction factor.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.6
• /
• pp.852-866
• /
• 2015

This study analyzes the form of sleeve heads, which is an important internal element that affects the appearance of jacket sleeves. It characterized sleeve head forms by investigating angles, materials, and a combination of formations for 50 sleeve heads. It conducted an appearance evaluation by comparing and analyzing the results. This paper develops a sleeve head appropriately for sleeve construction. The study results are as follows. First, the product was divided into three parts: based on, force receiving, and sleeve cap parts. There were four types of man's sleeve head: straight, arc, and curve A and B types. The woman's sleeve head had two types: straight and curve B type. Second, the feature of each type of sleeve head was analyzed. A straight type emphasized the based on part. An arc type highlighted the force receiving part while the based on part decreased. The sleeve cap part, force receiving part, and based on part were emphasized in the arc type sleeve head. Third, as a result of the appearance evaluation, each type was rank as straight type < arc type ${\leq}$ curve A < curve B. The straight type did not get positive results as it had extra ease when the sleeve head was attached to a Jacket Sleeve. The arc type was evaluated poorly due to an inappropriate sleeve cap composition. The curve type received an excellent overall outcome as it fit into the sleeve cap part well and highlighted the force receiving part in order to minimize front and back wrinkles. Therefore, the curve type made the resemblance of the jacket appearance perfect and closest to the sleeve pattern.

• Journal of the Korean Society of Costume
• /
• v.53 no.8
• /
• pp.1-10
• /
• 2003

The purpose of this study was to verify fitness of a new raglan sleeve pattern according to the result of appearance and function evaluation. Also, it was to search the relation between the construction factor and the function on the selected 3 types of the existent raglan sleeve patterns and the new sleeve pattern. Three female university students having different shoulder shapes were selected as subjects, wore 4 different types of the raglan steeve was evaluated by professional panel. The functions of the evaluated sleeve patterns evaluated was made by the wearer themselves. According to the comparison of the new raglan sleeve pattern with the existent raglan sleeve pattern, the new raglan sleeve pattern acquired the higher evaluation scores both on the appearance test and the function evaluation. It was known that the appearance and function of the raglan sleeve pattern were effected by construction factors of the sleeve pattern.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.4
• /
• pp.123-137
• /
• 2017

The purpose of this study is to suggest sleeve cap height with a satisfying wearing sensation and appearance on jackets for women in their twenties so that high-consumer demand jackets can be produced. Five experimental jackets with sleeve cap heights of [(AH/3)-1cm], [(AH/3)-0.5cm], [AH/3], [(AH/3)+0.5cm] and [(AH/3)+0.8cm] were made for 30 subjects to try on after which the subjects were then surveyed for their assessment of appearance, wearing sensation and preference. On the basis of the results, the optimum height of the sleeve cap has been proposed along with the following contents and results of this research. 1. [AH/3] [(AH/3)+0.8cm] of sleeve cap height was assessed to beof desirable appearance. 2. [AH/3] of sleeve cap height garnered a high opinion in terms of intuitive wearing sensation, while [(AH/3)-1cm] [AH/3] were the heights with overall satisfaction of intuitive and movement wearing sensations. If discomfort in the upper sleeve at 'straight arm' posture can be tolerated, the sleeve cap height can be set to [(AH/3)-1cm]~[(AH/3)+0.5cm]. 3. [AH/3] and [(AH/3)+0.5cm] were found to have a high preference among wearers, which indicated that the women in their twenties prefer a slim type of sleeve, putting appearance above wearing sensation. Consequently, [AH/3] is desirable when appearance, wearing sensation and preference are considered, [(AH/3)+0.5cm] is fit for business uniform for static duties or formal dress focused on aesthetic impression and [(AH/3)-1cm]~[AH/3] are desirable for work clothes when considering active duties.

• The Korean Journal of Community Living Science
• /
• v.23 no.2
• /
• pp.189-198
• /
• 2012

This study aim was to understand the effects of the change of the sleeve cap height on the sleeve cap line and the sleeve appearance by making nine different sleeve cap height patterns. When a subject sews the virtual and real garments with this, it provides data base through which she can make the suitable sleeve by conducting a comparative analysis of the appearance and cross-sectional diagram and grasping the relation between the sleeve cap line ease and the shape of the sleeve. As a result of the analysis of the image of 3D virtual garment, the shape of the armscye and the position of the bust line and sleeve baseline, the sleeve cap height and the sewing ease of the sleeve cap line affect on the shape of the sleeve and the armscye. Although the real garment is slightly different from the virtual garment they have shown similar tendency. Therefore, if the 3D virtual clothing system is used appropriately, it is possible to expect various study results in the apparel field without making real garments.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.3
• /
• pp.183-196
• /
• 2015

This study aims to develop sleeve pattern of tailored jacket which shows seamlessly beauty of females in their twenties who have relatively smaller change of body compared people of other ages and has outstanding functional operation. So we selected a pattern of manufacturer who received highest score after evaluating wearing condition of three types of jacket in the industry, whose targets are career women in their twenties and then tested its appearance and functional operation of 6 experimental jackets with armhole depth of B/4 and B/4-1(cm) along with sleeve cap height of A.H/3, A.H/3+1, A.H/3+2. As a result, the pattern which has good result of external appearance evaluation were sleeve with armhole depth of B/4-1 and sleeve cap height of A.H/3+2 as well as sleeve with armhole depth of B/4-1 and sleeve cap height of A.H/3+1. The pattern of good result for movement adaptation were sleeve with armhole depth of B/4-1 and sleeve cap height of A.H/3 as well as sleeve with armhole depth of B/4 and sleeve cap height of A.H/3. So we could find that the larger is the armhole depth and height of sleeve, the better influence on adaptability of jacket it makes and that the smaller is the armhole depth and height of sleeve, the better influence on movement adaptability of jacket it makes. It has been proved that armhole depth of tailored jacket of females in their twenties doesn't affect significantly on its appearance when designing it but it makes good influence on movement adaptability when experimental clothing has armhole depth of B/4-1and that sleeve cap height of A.H/3 that is 1cm shorter than A.H/3+1 which is used in industry makes good influence on appearance and functional operation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.2
• /
• pp.101-113
• /
• 2016

This study was conducted in order to analyze draping and flat pattern according to jacket design, and provide basic materials for developing a jacket pattern that can enhance fitness, functionality, and aesthetic expression of clothes by reflecting esthetic expression of draping and efficiency of flat pattern at the same time. For the experimental jacket designs of a one-piece sleeve jacket and a two-piece sleeve jacket were selected among the entries of the designer Rubina for 2014 F/W Seoul Fashion Week. Designer brand Rubina usually produced clothes using draping and the designer brand company provided the experimental patterns for the study. We also had flat patterns of the same design and size specifications designed by a flat patternmaker who has 30 year-experience in flat pattern like Rubina. The test apparel jacket was made of 20's cotton yarns. Three models wore the jackets and evaluation on appearance fitness was conducted by 7 members in an expert panel group from August 10, 2015 to September 10, 2015. As a result of appearance fitness analysis on one-piece sleeve jacket, there were significant difference in 4 items among 17 items in terms of overall appearance. The appearance of jackets by draping had higher score than those using flat pattern. As for two-piece sleeve jacket, there were significant differences in 7 items among 17 items related to overall appearance. As for the items related to sleeve, 5 items out of 13 showed significant differences. Except for one item, appearance of jackets using draping had higher score than flat pattern. As for motion fitness, draping was evaluated to be more comfortable. Applying the items with high scores in appearance and motion fitness in draping to flat pattern, The study suggests a new jacket pattern development that would increase the satisfaction of consumers for future research.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.5
• /
• pp.575-584
• /
• 1998

The purpose of this study was to develop the better fitting and more comfortable sleeve pattern for women's jacket, as the first step. Five types of existent sleeve pattern were collected, made and worn compared with the sensory evaluations method. The main results of this study were as follows 1. Sensory evaluation for appearance; According to the result of Duncan's multiple range test among the five sleeve patterns, TOJAIUN method sleeve was most satisfactory, and the next was the JUNGMYUNGJA method sleeve followed by NASAN, MOONWHA, ESMOD method sleeve. 2. Sensory evaluation for comfort; The result of Duncan's multiple range test showed that the ESMOD method sleeve was comfortable, and the next was the Japanese MOONWHA method sleeve followd by JUNGMYUNGJA, TOJAIVN, NASAN method sleeve. The result of 3-way ANOVA, main effect for 3 independent variables and interaction for pattern x part, posturers part showed significant difference.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.1
• /
• pp.59-71
• /
• 2011

As an exaggerated-shoulder becomes a growing trend women's clothing, the crescent shaped sleeve with parallel style lines in the arm hole is a highly used women's sleeve pattern. This study develops and provides an applicable method for making the crescent shaped power shoulder sleeve. An efficient basic method for making the 2 piece crescent shaped sleeve was developed and the sensory appearance test was carried out with experimental clothes. There are two principles for making the crescent shaped sleeve: having a style line in the sleeve and pasting part of the cut arm hole of the bodice to the sleeve. The latter would be more convenient for a 2 piece sleeve, mostly used for jackets. The crescent shaped sleeve used in power shoulder jackets should set the shoulder angle as you wish to extend and raise the shoulder point of the bodice and sleeve to the same height. For a stronger power shoulder image, a 3 piece sleeve has a better appearance. Also, the height of the shoulder has to be enhanced with a shoulder pad for a more stable sleeve.