• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1097-1106
• /
• 2007

Rail provides running tract for train and broadly and widely conveys the weight of the train exerted from the train wheels that the rail directly supports onto the cross tie and roadbed, and supports the cross-sectional pressure exerted by centrifugal force at curvatures. That is, stationary rail provides surface on which dynamic train runs and guarantees cross-sectional resistance to enable the vertical snake motion of the train wheels as well as to maintain lateral force at curvatures. Rail provides running surface on which train wheels can run smoothly, and secures vertical and lateral force. However, it undergoes continuous destructive reactions (wearing and damages) and abrasion of the cladding by the train wheels. It is obvious that wearing will result when two metal parts act against each other. However, occurrence of abnormal wearing such as rapid wearing of the rail side due to complex generation of various mechanisms at the contact surface between the rail and train wheel flange. It is not easy to simply examine the causes of occurrence of abnormal wearing of rail and train wheel flange. Although countless number of academicians and specialists are conducting researches on abnormal wearing of rail and vertical wearing of train wheels, I believe it is too early to argue on pros and cons due to insufficiency of officially verified information on the issue. This review will be focusing on the examples of repairs that reduced the generation of abnormal wearing of rail by reviewing and improving characteristics of wearing and slack, speed of the train and cant as well as status of lubricator by choosing the compound curves present in the section between the $Anguk{\sim}Jongno3-ga$ Stations of the Route No. 3 among the compound curve tracks of the Seoul Metro Routes No. 3 & 4 at which abnormal wearing is generated continuously.

• The Journal of Engineering Geology
• /
• v.17 no.2 s.52
• /
• pp.177-185
• /
• 2007

Most of hot springs don't spring out naturally but are pumped by submersible pumps in Korea. When pumped piezometric head in a well is dropped with proportion to quantity. This research investigates relationships between quantity and drawdown at the Onyang hot spring area. There are 38 wells at this area and the depths of wells range from 124 m to 303 m. Piezometric heads of 4 wells were observed for about 10 months. Fluctuation patterns of piezometric heads seem to be a sine curve with a you period by a high demand and a slack season. Drawdowns of fluctuations were about 98-139 m depth to water table when wells were pumped at $2,300-4,800m^3/day$. A equation was made through analyzing quantity and drawdown.

• Fashion & Textile Research Journal
• /
• v.18 no.5
• /
• pp.695-707
• /
• 2016

This study presents quantitative evaluation standards for the shape fitness test, conducted in the process of the slacks fit test. This study aims to quantify appearance sensory test of slacks for the objectification of qualitative evaluation methods in existing shape fitness tests. The subjects were women of standard body type between the ages of 18 and 24. Slacks differing in their ease in waist girth, hip girth, crotch length and knee length were designed to test their shape fitness. The gap volume distribution between the body and slack, angle of the baseline by body part, and ratio of total thickness from the sideline using 3D human body scan data (which reflect the results of the appearance sensory test) were presented as quantitative evaluation standards. There were less wrinkles in the wrinkle/overstretch and ease categories of the appearance sensory test; in addition, ease was adequate and small enough to comfortably perform basic human activities in the standing upright posture. The gap volume distribution analysis between body and slacks showed that curves increased in the slacks surface along with an increase of ease in slacks and suggested that wrinkles also increased. In the baseline's horizontal categories in terms of a $0^{\circ}$ horizontal angle, the range of angles were evaluated as adequate by the clothing expert group. The total thickness ratio of 0.5:0.5 divides into the sideline from the baseline.

• Journal of Korea Multimedia Society
• /
• v.13 no.10
• /
• pp.1423-1435
• /
• 2010

Building wireless sensor networks requires a constituting sensor node to consider the following limited hardware resources: a small battery lifetime limiting available power supply for the sensor node, a low-power microprocessor with a low-performance computing capability, and scarce memory resources. Despite such limited hardware resources of the sensor node, the sensor node platform needs to activate real-time sensing, guarantee the real-time processing of sensing data, and exchange data between individual sensor nodes concurrently. Therefore, in this paper, we propose an energy-efficient real-time task scheduling technique for battery-powered wireless sensor nodes. The proposed energy-efficient task scheduling technique controls the microprocessor's operating frequency and reduces the power consumption of a task by exploiting the slack time of the task when the actual execution time of the task can be less than its worst case execution time. The outcomes from experiments showed that the proposed scheduling technique yielded efficient performance in terms of guaranteeing the completion of real-time tasks within their deadlines and aiming to provide low power consumption.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.571-578
• /
• 2012

In this paper, we propose two main points. The first is the constraint for logic synthesis, and the second is an efficient logic synthesis method. Logic synthesis is a process to obtain the gate-level netlist from RTL (register transfer level) codes using logic mapping and optimization with the specified constraints. The result of logic synthesis is tightly dependent on constraint and logic synthesis method. Since the size and timing can be dramatically changed by these, we should precisely consider them. In this paper, we present the considering items in the process of logic synthesis by using our experience and experimental results. The proposed techniques was applied to a circuit with the hardware resource of about 650K gates. The synthesis time for the hybrid method was reduced by 47% comparing the bottom-up method and It has better timing property about slack than top-down method.

• 한국해양학회지
• /
• v.13 no.1
• /
• pp.29-34
• /
• 1978

Simultaneous tidal current observation at five or seven stations on the channel near Incheon Habour was conducted at neap, mean and spring tides during the period of August 16 to August 27, 1976 and the characteristic of tidal currents with each tide was studied by the analysis of these data. Times of slack refer to the times of high and low waters at neap, mean and spring tides seem to be small. Times of maximum current refer to the times of high and low waters at the mean tide tends to appear earlier than that of the neap tide and later than that of the spring tide. The velocity ratio of maximum ebb current to maximum flood current at the mean tide has larger value than that of neap tide and has smaller value than that of spring tide. The current velocity ratio of spring tide to neap tide and to mean tide are approximately 1.8 and 1.3, respectively.

• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.135-146
• /
• 2011

A voluminous research on efficiency employs the DEA(Data Envelope Analysis) models. There are, however, only very few that have an interest in the factors influencing such efficiencies. We, furthermore, do not see any studies which analyze the long-term efficiency of the logistics providers using the panel cointegration techniques. The purpose of this paper, hence, is to evaluate the efficiency, analyse its determinants and show a long-term relationship between turnover and the other variables employing the SBM(Slack Based Measure) model, Tobit model, the panel procedure and the FMOLS(Fully Modified OLS). The panel data are composed of 9 individuals and 6 years. The panel cointegrating vectors show that the group coefficient of asset and employees is not only significant but has expected signs, while some of the individual coefficients are insignificant or/and exhibit wrong signs. The panel cointegrating vectors from fully modified OLS also indicate that the estimated coefficients of the panel analysis tend to be overvalued and the asset influences the turnover far greater than the employee does.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.3
• /
• pp.215-220
• /
• 2009

Objective : Intraoperative ventriculostomy is widely adopted to make the slack brain. However, there are few reports about hemorrhagic or parenchymal injuries after ventriculostomy. We tried to analyze and investigate the incidence of these complications in a consecutive series of patients with aneurysmal subarachnoid hemorrhage (SAH). Methods : From September 2006 to June 2007, 43 patients underwent surgical clipping for aneurysmal SAH at our hospital. Among 43 patients, we investigated hemorrhagic or parenchymal injuries after intraoperative ventriculostomy using postoperative computed tomographic scan in 26 patients. After standard pterional craniotomy, ventriculostomy catheter was inserted perpendicular to the cortical surface along the bisectional imaginary line from Paine's point. Results : Hemorrhagic injuries were detected in 12 of 26 patients (46.2%). Mean systolic blood pressure during anesthesia was with in statistically significant parameter related to hemorrhage (p=0.006). On the other hand, parenchymal injuries were detected in 11 of 26 patients (42.3%). Female and the amount of infused mannitol during anesthesia showed statistically significant parameters related to parenchymal injury (p=0.005, 0.04, respectively). However, there were no ventriculostomy-related severe complications. Conclusion : In our series, hemorrhagic or parenchymal injuries after intraoperative ventriculostomy occurred more commonly than previously reported series in aneurysmal SAH patients. Although the clinical outcomes of complications are generally favorable, neurosurgeon must keep in mind the frequent occurrence of brain injury after intraoperative ventriculostomy in the acute stage of aneurysmal SAH.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.26-34
• /
• 2018

In this paper, we propose a scheduling scheme that can efficiently serve I/O requests having deadlines in flash storage. The I/O requests with deadlines, namely, real-time requests, are assumed to be issued for streaming services of continuous media. Since a Web-based streaming server commonly supports downloads of HTMLs or images, we also aim to quickly process non-real-time I/O requests, together with real-time ones. For this purpose, we adopt the well-known rate-reservation EDF (RR-EDF) algorithm for determining scheduling priorities among mixed I/O requests. In fact, for the use of an EDF-style algorithm, overhead of task's switching should be low and predictable, as with its application of CPU scheduling. In other words, the EDF algorithm is inherently unsuitable for scheduling I/O requests in HDD storage because of highly varying latency times of HDD. Unlike HDD, time for reading a block in flash storage is almost uniform with respect to its physical location. This is because flash storage has no mechanical component, differently from HDD. By capitalizing on this uniform block read time, we compute bandwidth utilization rates of real-time requests from streams. Then, the RR-EDF algorithm is applied for determining how much storage bandwidth can be assigned to non-real-time requests, while meeting deadlines of real-time requests. From this, we can improve the service times of non-real-time requests, which are issued for downloads of static files. Because the proposed scheme can expand flexibly the scheduling periods of streams, it can provide a full usage of slack times, thereby improving the overall throughput of flash storage significantly.

• Korean Security Journal
• /
• no.29
• /
• pp.87-113
• /
• 2011

Korean security industry has history of more than half a century, and it is growing fast. Private security industry contributes not only to livelihood safety, but also to national security. The area of the industry is being expanded. Security Act is closely related to the security industry, and has contributed to the growth of private security industry sector. Security Act of Korea, which was established in 1976, was originally made after Japanese Security Act. But nowadays, Korean Security Act is as systematic as the Japanese act. However, for 10 years, Security Act of Korea has been stagnant, not able to reflect security industries' demand. The writer has contributed to the development of Security Act. In 1995, the writer wrote the basic framework of Security Instructor Qualifications System and drafted Security Act in 2002. There are currently many problems in existing Security Act, but there are four representative problems. (1) No more establishment of new security sector, (2) excessively slack qualification criteria, (3) the education system for guards, (4) the security Instructor examination system. This paper derives problems of current Security Act, and suggests solutions for them. Not only the academic world, but all of us should pay attention to the revision of Security Act.