• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.9-18
• /
• 2010

High performance is required with small size and low power in the mobile embedded system. A CORDIC algorithm can compute transcendental functions effectively with only small adders and shifters and is suitable one for the mobile embedded system. However CORDIC unit has performance degradation according due to iterative inter-rotations. Adder design is an important design unit to be optimized for a high performance and low power CORDIC unit. It is necessary to explore the design space of a CORDIC unit considering trade-offs of an adder unit while satisfying delay, area and power constraints. In this paper, we suggest a CORDIC architecture employing a heterogeneous adder and an optimization methodology for producing better optimal tradeoff points of CORDIC designs.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.3
• /
• pp.1-10
• /
• 2013

In this paper, we propose a method of embedded linux light-weight to improve efficiency of application running on embedded systems. Three methods including fast booting scheme applying the Hibernation technique, JFFS2 file system optimization applying the Symbolic Link and virtual address mapping, kernel light-weight that guarantees the general purpose was applied. Since then check the system dependency and generate kernel image according to the target embedded kit. And embedded system performance of existing linux and linux which the method proposed in this paper was compared. In experimental result, the kernel size was 9.6% improved and the system booting time was 18% improved. And application processing speed on target embedded kit was improved 11% in the best case, 66% in the worst case. This result show that the light-weight method proposed in this paper is guarantee fast booting time and securing resources and it is good for the application processing speed improvement.

• Korean Journal of Agricultural Science
• /
• v.45 no.2
• /
• pp.283-289
• /
• 2018

Agricultural gear reducers are used in a variety of agricultural machinery designs such as in agricultural tractors and transport cars, and even greenhouses. For greenhouses, a gear reducer is used to control windows on the side and the roof. Gear reducers for agricultural applications are designed using the empirical method because of the lack of a standard for experimentation. Simulation is necessary for the optimal design of an agricultural gear reducer. There are many advantages to this optimization such as low-cost maintenance, reduced size, and weight. In this study, bending and contact safety factor simulation for the gear reducer of a greenhouse was conducted by decreasing the face widths of helical gear shaft 2 and shaft 3 from 30.8 and 30 mm, respectively, at an interval of 4 mm. The bending and contact safety factors were calculated using AGMA standard. Simulation results showed that bending and contact safety factors decreased rapidly when the face width of the helical gear on shaft 2 was 30 mm and the face width of helical gear on shaft 3 decreased from 30.8 mm to 26.8 mm, suggesting that it would be safe to reduce the face width of the helical gear on shaft 3 to 26.8 mm. The reduction of the face width also reduced the weight of the agricultural gear. This study suggests that the agricultural gear reducer safety factor decreases as the face width decreases.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.631-631
• /
• 2013

Battery has major drawbacks including its size and life expectancy, and environmental problem. As an alternative, energy harvesting is emerging as a potential solution to replace battery along with more energy-efficient IT devices. The idea of harnessing energy from our living environment is sustainable, semi-permanent, and eco-friendly. Also, unlike battery, energy harvester does not require much space to store energy. Therefore, energy harvesting can provide a better source of power for small, portable, and wireless devices. Among various ways of harvesting energy from our surroundings, triboelectricity is chosen due to its potential to be miniaturized, and efficient. Triboelectric effect occurs as two different materials with different polarity of charge separation come into contact through friction, and then become separated so that electric potential difference is achieved. In this research, such characteristic of triboelectricity is used as a way to convert ambient mechanical energy into electric energy.Series of recent researches have shown promising results that the triboelectric energy harvester can be simple and cost effective. However, sufficient electricity level required to operate mobile devices has not yet been achieved.In this research, our group focuses on the design and optimization of triboelectric energy harvesting device to enhance its output. By using maskless lithography to pattern Kapton film and silicon substrate, which is used as a mold for PDMS thin layer, and sputtering metal electrodes on each side, we fabricate and demonstrate different designs of triboelectric energy harvester that utilizes the contact electrification between a polymer thin film and a metal thin foil. In order to achieve optimized result, the output voltage and current are measured under diverse conditions, which include different surface structure and pattern, material, and the gap between layers.

• Journal of Korea Water Resources Association
• /
• v.41 no.12
• /
• pp.1211-1218
• /
• 2008

This study is for design of the detention system distributed in a watershed by the Multi-Objective Genetic Algorithms(MOGAs). A new model is developed to determine optimal size and location of detention. The developed model has two primary interfaced components such as a rainfall runoff model to simulate water surface elevation(or flowrate) and MOGAs to get the optimal solution. The objective functions used in this model depend on the peak flow and storage of detention. With various constraints such as structural limitations, capacities of storage and operational targets. The developed model is applied at Gwanyang basin within Anyang watershed. The simulation results show the maximum outlet reduction is occurred at detention facilities located in upper reach of watershed in the peak discharge rates. It is also reviewed the simultaneous construction of an off-line detention and an on-line detention. The methodologies obtained from this study will be used to control the flood discharges and to reduce flood damage in urbanized watershed.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.2
• /
• pp.356-363
• /
• 2016

Human papillomavirus (HPV), a non-enveloped, double-stranded DNA tumor virus, is a primary etiological agent of cervical cancer development. As a potential tool for prophylactic vaccination, the development of virus-like particles (VLPs) containing the HPV16 L1 capsid protein is highly desired. In this study, we developed a high-level expression system of the HPV16 L1 in Escherichia coli for the purpose of VLP development. The native gene of HPV16 L1 has many rare codons that cause the early termination of translation and result in the production of truncated forms. First, we optimized the codon of the HPV16 L1 gene to the preferable codons of E. coli, and we succeeded in producing the full-size HPV16 L1 protein without early termination. Next, to find the best host for the production of HPV16 L1, we examined a total of eight E. coli strains, and E. coli BL21(DE3) with the highest yield among the strains was selected. With the selected host-vector system, we did a fed-batch cultivation in a lab-scale bioreactor. Two different feeding solutions (complex and defined feeding solutions) were examined and, when the complex feeding solution was used, a 6-fold higher production yield (4.6 g/l) was obtained compared with that with the defined feeding solution.

• Journal of Convergence Society for SMB
• /
• v.1 no.1
• /
• pp.67-73
• /
• 2011

Handover in high speed mobile communication service, in particulary mobile WiMAX is supported efficiency mobility to 120km/h speed. But, in order to accommodate number of user increment in a cell, wireless network is increment to microcell and picocell by allocate bandwidth and by decrease cell size. handover is occurrent and increment connection failure ratio In this result. IEEE 802.16 standard is support seamless connection through handover optimization scheme. But because authentication process is abbreviate, network weakness is exposure. In this paper, we propose handover scheme for support realtime service as VoIP, Picure communication, Streaming Data Service in order to support partially encryption method. In experiment, proposed scheme is proof which process time is increment 20% more than previous scheme.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.2 s.302
• /
• pp.33-38
• /
• 2005

In this paper, the sensing unit of a non-invasive blood glucose sensor for home users, using a magneto-resonance absorption method, have been designed and manufactured. The sensor is capable of non-invasively determining blood glucose levels through measuring the 1H spin-lattice relaxation time in human body, The comparison of initial models, with different dimensions and shapes, for the sensing unit has led us to select the materials of the final model, which has adequate size and weight for home use. Through the design optimization using the FEM model, the dimension of final model has been determined to satisfy the required strength and uniformity of the magnetic field in the detecting area.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.8
• /
• pp.24-32
• /
• 2000

In this paper, we have designed and fabricated a new type power divider to be efficient to a size and electrical performance by folding each quarter-wavelength 70.7 Ω section into a tightly-coupled "meander-line" and inserting a slit. In this type, because of coupling, the electrical phase of quarter -wavelength line and the performance change. For this reason, with the inductive slit and the tuning of quarter-wavelength line length, we have compensated for those. The inductance value of the inserted slit is decided by its width and depth, therefore, we could improve the electrical performance through optimization of inductance. Input and output return losses of the designed power divider were -34.2 dB, -34.3 dB respectively, and isolation was -36.7 dB at 1.75 GHz. Besides, a new design approach reduced occupied substrate area by 3:1 approximately.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.2
• /
• pp.65-74
• /
• 2009

In optimizing the neural network structure, there are two methods of the pruning scheme and the constructive scheme. In this paper we use the pruning scheme to optimize neural network structure, and the genetic algorithm to find out its optimum node pruning. In the conventional researches, the input and hidden layers were optimized separately. On the contrary we attempted to optimize the two layers simultaneously by encoding two layers in a chromosome. The offspring networks inherit the weights from the parent. For teaming, we used the existing error back-propagation algorithm. In our experiment with various databases from UCI Machine Learning Repository, we could get the optimal performance when the network size was reduced by about $8{\sim}25%$. As a result of t-test the proposed method was shown better performance, compared with other pruning and construction methods through the cross-validation.