• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2127-2132
• /
• 2003

A computational study is performed to better understand the choke phenomenon of unsteady gas flow through a critical nozzle. The axisymmetric, unsteady, compressible, Navier-Stokes equations are solved using a finite volume method. In order to simulate the effects of back pressure fluctuations on the critical nozzle flow, a forced sinusoidal pressure wave is assumed downstream the exit of the critical nozzle. It's frequency is 20kHz and amplitude is varied below 15% of time-mean back pressure. The results obtained show that for low Reynolds numbers, the unsteady effects of the pressure fluctuations can propagate upstream of the throat of critical nozzle, and thereby giving rise to applicable fluctuations of mass flow through the critical nozzle. The effect of the amplitude of the excited pressure fluctuations on the choke phenomenon is discussed in details.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2169-2180
• /
• 1992

Solid propellant combustion is investigated for its response to several imposed pressure histories. For this purpose, it is assumed that combustion takes place in a premixed gas evaporated from a uniform melt of solid propellant. One-dimensional unsteady problem is than numerically solved for a pressure coupling, with a steady state as an initial state. The results in response to pressure of finite sinusoidal waves show that unsteady mass fluxes are sometimes quite different from those predicted by the classical quasisteady burning law of Vieile. In addition, abnormal mass flux excursions are captured for a large pressure exponent and a lower melting point.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.5
• /
• pp.122-129
• /
• 1997

In the signal processing fields, sinusoidal wave is of much meaning because it may carry other important informations. But in reality due to the finite number of sensors along with the noise detected by the sensors, the resolution of frequency detection is in general much degraded. In this paper, new method is proposed to embrove the frequency resolution of the finite-length sinusoids burried in noise.

• Journal of Digital Contents Society
• /
• v.6 no.1
• /
• pp.35-39
• /
• 2005

It is significantly important problem in computer what is estimating 3D information from 2D images. However, most of the related works have been interested in the analysis of the changes of 2D image, so that, they need much time to solve the complex equation and expensive device. In this paper, we first actively project the pattern of the sinusoidal wave into the object. Then, we measure the change of the phase from the distortion occurring according to the shape of the object, and we use the change of the phase in order to estimate the depth information. This is our proposal.

• Journal of Power System Engineering
• /
• v.18 no.5
• /
• pp.28-34
• /
• 2014

This paper deals with optimum PI controller design using genetic algorithm to improve control performance and robustness for an oil cooler system. The optimum PI gain was found to minimize an object function, integrated absolute error, and to satisfy control design specifications such as overshoot and settling time based on practical transfer function of the oil cooler system. The control performance and robustness were investigated by comparing indicial responses and Bode diagram analysis with respect to three kinds of PI gains obtained from different gain decision manners. Moreover, the robustness against to input disturbances, sinusoidal wave form and abrupt single pulse, was evaluated. The computer simulation results showed that the suggested optimum gain can establish desirable control performance and strong robustness with easy design process.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.2
• /
• pp.18-25
• /
• 1994

In this papaer, the input impedance of the rectangular microstrip patch antennas with the multilayered structure is analysed by using the moment method technique in the spectral domain. The analysis is carried out for two different feeding structures : directfeeding structure and electromagnetic-feeding structure. In order to obtain the accurate input impedance, the current distribution on the microstrip feed line is modeled by the quasi-TEM travelling wave and the PWS(piecewise sinusoidal) mode. The input impedances of the designed microstrip antennas are measured and compared with the calculation. which shows a good agreement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.171-174
• /
• 2008

In this paper, interactive inverter in series 2 module inverters is proposed. One of two inverters makes equivalent voltage. Another removes harmonics, contained in source voltage, through control inductor current. As a result, it remains only basic frequency voltage to produce the purely sinusoidal current wave. Using 2 module inverters is verified with simulation.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.355-359
• /
• 2002

Much attention has been given to EMI effects created in variable speed ac drive system. Zero switching states of inverter control invoke large common mode voltage. This paper focuses on the switching techniques to mitigate common mode voltage. This paper proposes a common-mode voltage reduction method based on sinusoidal pulse width modulation in three phase PWM inverter system. By using three carriers wave displaced by 120 degrees, it is possible to eliminate a common mode voltage pulse In one control period. Simulation and experimental results show that common mode voltages In the proposed technique are reduced more than conventional technique.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.241-244
• /
• 2002

This paper presents the electronic ballast for the metal halide lamp with free voltage input and implemented for CDM-T[150W] lamp. HID lamps have a good color rendition, long life and good focusing capability but they have fickers by acoustic resonance when driven at high frequency. To reduce the acoustic resonance phenomena, the electronic ballast was designed for high frequency operation with the constant frequency sinusoidal wave of 75[kHz]. Finally, the experimental results on the ballast of CDM-T [150W]metal halide lamp with the propose methods are discussed.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.366-373
• /
• 1998

In this paper, a new control strategy to reduce switching losses in three-phase voltage-source PWM converters is proposed according to Modified-Period-Average-Model (MPAN). The basic concept of this strategy is aimed at calculating the phase control voltages for controlling the source currents to be sinusoidal and in phase with the source voltages, and reducing the number of switching in each period. The phase control voltages of Period-Average-Model(PAM) is obtained according to analyzing the operation of PWM converter. In order to reduce the sensitivity to system parameters in PAM, MPAM is deduced. Then a square wave whose frequency is three times of utility frequency is added to the phase control voltages derived from MPAM. The control strategy reduces the switching losses since there exists about one-third blanking time for every phase in one period. The theoretical derivation and the control strategy are experimentally verified on a 2.5 kW three-phase voltage source converter.