• 제목/요약/키워드: sinusoidal wave

검색결과 298건 처리시간 0.028초

정현파 크기로 가중치 된 위상 오류 함수를 사용한 음성의 중첩합산 정현파 합성 방법 (Overlap and Add Sinusoidal Synthesis Method of Speech Signal using Amplitude-weighted Phase Error Function)

  • 박종배;김규진;정규혁;김종학;이인성
    • 한국통신학회논문지
    • /
    • 제32권12C호
    • /
    • pp.1149-1155
    • /
    • 2007
  • 본 논문에서는 음성신호의 정현파 합성방법 중 하나인 선형위상을 사용한 중첩합산방법에 대하여 합성응성의 연속성을 개선시킨 새로운 방법을 제안한다. 기존의 중첩합산 정현파 합성방법은 프레임의 중간 지점에 대한 위상 값을 예측하기 위해 합성 파형의 경계면에 대한 위상 차이를 최소화하는 방법을 사용하였으나, 제안된 방법은 중간지점의 위상만이 아닌 최종 합성된 신호들 간의 차이를 최소화하는 방법을 사용한다. 이러한 합성신호의 오차 함수를 최소화하는 과정은 정현파 크기 값을 가중치로 사용한 위상오차 함수로 근사화 될 수 있다. 제안된 합성 방법의 연속성에 대한 성능을 검증하기 위해 합성신호의 전 구간에 대한 합성 신호들 간의 평균 오차 값 및 청취자 테스트를 하였다. 기존의 위상 오차함수와 비교하여 개선된 연속성 성능을 얻을 수 있었다.

Mach-Zehnder 광섬유 간섭계를 이용한 압전형 진동발생기의 동특성 조사 (The Measurements of Vibration Displacement of the Piezoelectric Exciter Using Mach-Zehnder Optical Fiber Interferometer)

  • 조승일;김성부;이종규;이용봉;이두희
    • 한국소음진동공학회논문집
    • /
    • 제16권10호
    • /
    • pp.1044-1049
    • /
    • 2006
  • The vibration exciter with the accurate calibration requires a low distortion along a single axis over a wide range of frequency. The fabricated piezoelectric exciter was composed of a base, piezoelectric element(Venitron PZT 5A), electrode and seismic mass. Its performance characteristics is evaluated the Mach-Zehnder optical fiber interferometer. The phase of the optical wave passing through the optical fiber around the piezoelectric element was related the vibrational amplitude with a change of the applied sinusoidal voltage on the piezoelectric element. The dynamic characteristics of vibration exciter can be obtained by measuring the vibrational amplitude with a sinusoidal applied voltage on the piezoelectric element. The sensitivity of the fabricated piezoelectric exciter had a 0.4 nm/V which was uniform up to 20 kHz.

Scaling of design earthquake ground motions for tall buildings based on drift and input energy demands

  • Takewaki, I.;Tsujimoto, H.
    • Earthquakes and Structures
    • /
    • 제2권2호
    • /
    • pp.171-187
    • /
    • 2011
  • Rational scaling of design earthquake ground motions for tall buildings is essential for safer, risk-based design of tall buildings. This paper provides the structural designers with an insight for more rational scaling based on drift and input energy demands. Since a resonant sinusoidal motion can be an approximate critical excitation to elastic and inelastic structures under the constraint of acceleration or velocity power, a resonant sinusoidal motion with variable period and duration is used as an input wave of the near-field and far-field ground motions. This enables one to understand clearly the relation of the intensity normalization index of ground motion (maximum acceleration, maximum velocity, acceleration power, velocity power) with the response performance (peak interstory drift, total input energy). It is proved that, when the maximum ground velocity is adopted as the normalization index, the maximum interstory drift exhibits a stable property irrespective of the number of stories. It is further shown that, when the velocity power is adopted as the normalization index, the total input energy exhibits a stable property irrespective of the number of stories. It is finally concluded that the former property on peak drift can hold for the practical design response spectrum-compatible ground motions.

단상 강압형 정류기의 정현파 입력전류 개선에 관한 연구 (A Study on sine-wave Input Current Correction of Single-Phase Buck Rectifier)

  • 정상화;이현우;서기영;권순걸;김은수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.180-182
    • /
    • 2001
  • Input Current Correction of Single-Phase Buck Rectifier is studied in the paper. To sinusoidal waveform the input current with a near-unity power factor over a wide variety of operating conditions, the output capacitor is operated with voltage reversibility for the supply by arranging the auxiliary diode and power switching device. Then the output voltage is superposed on the input voltage during on time duration of power switching devices in order to minimize the input current distortion caused by the small input voltage when changing the polarity. The tested setup, using two insulated-gate bipolar transistors(IGBT) and a microcomputer, is implemented and IGBT are switched with 20[kHz], which is out of the audible band. Moreover, a rigorous state-space analysis is introduced to predict the operation of the rectifier. The simulated results confirm that the input current can be sinusoidal waveform with a near-unity power factor and a satisfactory output voltage regulation can be achieved.

  • PDF

Propagation Dynamics of a Finite-energy Airy Beam with Sinusoidal Phase in Optical Lattice

  • Huang, Xiaoyuan;Chen, Manna;Zhang, Geng;Liu, Ye;Wang, Hongcheng
    • Current Optics and Photonics
    • /
    • 제4권4호
    • /
    • pp.267-272
    • /
    • 2020
  • The propagation of a truncated Airy beam with spatial phase modulation (SPM) is investigated in Kerr nonlinearity with an optical lattice. Before the truncated Airy beam enters the optical lattice, a sinusoidal phase is introduced on the wave-front of the beam. The effect of the spatial phase modulation and optical lattice on propagation behavior is analyzed by direct numerical simulation. It is found that the propagation direction of a truncated Airy beam can be effectively controlled by adjusting the values of phase shift. The effects of optical amplitude, truncation factor, spatial modulation frequency, lattice period and lattice depth on the propagation are discussed in detail. By choosing a high modulation depth, the finite-energy Airy beam can be deflected with a large deflection angle in an optical lattice.

영구자석형 동기전동기의 절대 위치 검출을 위한 엔코더 복합 신호의 분석 (Analysis of the Encoder Composite Signal for a Absolute Position Detection of the Permanent Magnet Type Synchronous Motor)

  • 김진애;주재훈;정세영;최중경
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2007년도 추계종합학술대회
    • /
    • pp.180-184
    • /
    • 2007
  • 최대 토크를 발휘하도록 정현파형 연구자석형 동기전동기를 구동하기 위해서는 회전자 절대위치에 동기화된 120도 위상차를 갖는 3상 정현파 전류 입력이 고정자 코일에 요구된다. 그러므로 회전자 절대위치 검출이 필연적이다. 그리고 고정자 자계와 회전자 자계 사이의 90도 위상 관계가 정류 동작에 의해 유지 되야 한다. 정류를 위한 절대 위치 검출은 일반적으로 모터 축에 부착된 엔코더 출력 신호의 분석에 의해 이루어진다. 본 연구는 현대의 엔코더 시스템을 부착한 모터의 절대위치를 검출 할 수 있는 신호처리 논리회로 설계를 목적으로 하며, 고정자 코일에 정현파 전류 입력을 만들어주기 위한 삼상 기준파형을 발생시킨다.

  • PDF

작은 정현파입력의 50% Duty Ratio 디지털 클럭레벨 변환기 설계 (Design of digital clock level translator with 50% duty ratio from small sinusoidal input)

  • 박문양;이종열;김욱;송원철;김경수
    • 한국통신학회논문지
    • /
    • 제23권8호
    • /
    • pp.2064-2071
    • /
    • 1998
  • 휴대용 기기에서 자체 발진하여 클럭원으로 사용되는 TCXO의 출력과 같은 작은 진폭(400mV)의 정현파 입력을 내부 논리회로의 클럭원으로 사용하기 위한 파형정형 및 50%의 듀티 비(duty ratio)의 출력을 가지는 새로운 디지털 클럭레벨 변환기를 설계, 개발 하였다. 정, 부 두 개의 비교기, RS 래치, 차아지 펌프, 기준 전압 발생기로 구성된 새로운 신호 변환회로는 출력파형의 펄스 폭을 감지하고, 이 결과를 궤환루프로 구성하여 입력 비교기 기준 전압단자로 궤환시킴으로서 다지털 신호레벨의 정확한 50%의 듀티 비를 가진 출력을 생성할 수 있다. 개발한 레벨변환기는 ADC등의 샘플링 클럭원, PLL 또는 신호 합성기의 클럭원으로 사용할 수가 있다. 설계는 $0.8\mu\textrm{m}$ double metal double poly analog CMOS 공정을 사용하고, BSIM3 model을 사용하였으며, 실험결과 370mV의 정현파 입력율 50 + 3%의 듀티 비를 가진 안정된 논리레벨 출력 동작특성을 얻을 수 있었다.

  • PDF

동기 전동기의 절대 위치 검출을 위한 엔코더 복합 신호의 분석 (Analysis of the Encoder Composite Signal for a Absolute Position Detection of the Synchronous Motor)

  • 주재훈;김동현;최중경
    • 한국정보통신학회논문지
    • /
    • 제15권5호
    • /
    • pp.1018-1024
    • /
    • 2011
  • 최대 토크를 발휘하도록 정현파형 영구자석형 동기전동기를 구동하기 위해서는 회전자 절대위치에 동기화된 120도 위상차를 갖는 3상 정현파 전류 입력이 고정자 코일에 요구된다. 그러므로 회전자 절대위치 검출이 필연적이다. 그리고 고정자 자계와 회전자 자계 사이의 90도 위상 관계가 정류 동작에 의해 유지되어야 한다. 정류를 위한 절대 위치 검출은 일반적으로 모터 축에 부착된 엔코더 출력 신호의 분석에 의해 이루어진다. 본 연구는 현대의 엔코더 시스템을 부착한 모터의 절대위치를 검출 할 수 있는 신호처리 논리회로 설계를 목적으로 하며, 고정자 코일에 정현파 전류 입력을 만들어주기 위한 삼상 기준파형을 발생시킨다.

고강도 집속형 초음파의 주파수 성분 특성에 따른 공동 현상 억제 효과 (Cavitation Suppression Effects by the Modification of the Spectral Characteristics of High Intensity Focused Ultrasound)

  • 최민주
    • 한국음향학회지
    • /
    • 제18권5호
    • /
    • pp.68-77
    • /
    • 1999
  • 본 논문에서는 고강도 집속형 초음파의 주파수 특성(파형)에 따른 초음파 공동 현상을 억 제하는 효과를 살펴보았다. 본 연구에서는 세가지 파형, 즉, 정현파(1 MHz, 5 MPa), 주파수 변조파(10 ㎲ 동안 1 MHz에서 6 MHz까지 선형적으로 증가, 5 MPa), 비대칭 충격파(기 본 주파수 1 MHz, 양압 12 MPa, 음압 -4 MPa)를 고려하였다. 동일한 강도(833 W/㎠)를 가지는 각 초음파에 노출된 초기 반경이 1 ㎛인 물 속에 있는 공기 기포의 반응을Gilmore bubble dynamic model 및 Church's rectified gas diffusion equation을 이용하여 예측하였다. 기포 진동의 크기는, 정현파에 노출된 경우와 비교하여, 주파수 변조된 초음파의 경우 현저히 감소하였고, 비대칭 충격파의 경우 약간 감소함을 볼 수 있었다. 흥미롭게도 주파수 변조파에 대한 기포의 반응은 변조된 초음파의 주파수 성분이 기포의 공진 주파수(3 MHz) 이상에서는 거의 동일하게 유지되는 것으로 나타났다. 이 사실은 주파수 변조를 현재의 1 MHz부터 6 MHz까지에서 1 MHz부터 3 MHz까지로 줄여도 유사한 공동 억제 효과를 얻을 수 있음을 암시한다. 실용적으로, 비교적 좁은 밴드 폭을 가지는 범용 초음파 변환기를 이 용하여 초음파의 공동 현상 억제 효과를 얻기 위한 주파수 변조를 구현할 수 있음을 의미한다. 본 연구의 결과는 초음파의 적절한 주파수 성분 조절로 초음파의 공동 현상을 일정 수준 억제할 수 있음을 시사한다.

  • PDF

정상인 힘 추적 능력 분석 (Analysis on Force Tracking Capabilities of Healthy Adults)

  • 이백희;박현지;김성호;이병화;나덕렬;유희천
    • 대한산업공학회지
    • /
    • 제41권2호
    • /
    • pp.121-127
    • /
    • 2015
  • A reduction of motor performance due to brain disorders can be screened by evaluating force tracking capabilities (FTCs). Existing studies have examined FTCs mainly using simple sinusoidal waves, of which repeated profiles have a critical limitation due to a learning effect in force tracking. The present study examined the effects of personal factors (age and gender) and sinusoidal wave factors (central force and complexity) on FTCs of healthy adults using composite sinusoidal wave profiles (CSWPs). FTCs were measured using Finger $Touch^{TM}$ for 30 seconds and quantified in terms of time within the target range (TWR, accuracy measure) and relative RMSE (RRMSE, variability measure). A total of 90 healthy adults in 20s to 70s with the equal gender ratio participated in the experiment consisting of combinations of 2 central force levels (6 N and 10 N) and 2 complexity levels (approximate entropy, ApEn = 0.03 and 0.06) of CSWPs. Significantly decreased FTCs (lower TWR and higher RRMSE) were found in aged adults, females, the low central force, and the high complexity. The detailed FTC decrements include a 43% reduced TWR and a 85% increased RRMSE of older adults in 70s as compared to those in 20s, a 17% reduced TWR and a 17% increased RRMSE of female as compared to those of male, a 30% reduced TWR and a 108% increased RRMSE at central force = 6N when compared to those at central force = 10N, and a 19% reduced TWR and a 30% increased RRMSE at ApEn = 0.06 as compared to those at ApEn = 0.03. The characteristics of FTCs for CSWPs can be of use in establishing an assessment protocol of motor performance for screening brain disorders.