• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1991.10a
• /
• pp.75-79
• /
• 1991

In this study, a new sinusoidal PWM inverter suitable for use with power MOSFETs is described. The output waveforms in the proposed OWM inverter are investigated both theoretically and experimentally. A modulating signal for the three-phase PWM inverter is obtained by adding 3nth harmonics to the conventional three-phase sine wave. By using the new modulating signal, the amplitude of the fundamental component is increased about 15 percent more than that of a conventional sine wave inverter and the commutation number of the inverter is decreased to two-thirds of a conventional one.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.924-926
• /
• 2001

This paper presents the characteristics of current harmonics and torque ripple of Brushless DC motor, which is developed the fan blower of vehicles, according to permanent magnet shape input voltage wave form. To investigate the torque ripple and the phase current harmonics, these characteristics is analysed and compared the experimental results. In the process of analysis, FEM is introduced and computed a transient state torque of BLDC with a sinusoidal and a PWM wave voltage.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.303-306
• /
• 1999

The paper describes a theoretical study on the speed of the torsional elastic waves propagating in a circular cylinder whose outer radius varies periodically as a harmonic function of the axial coordinate. The approximate solution for the phase speed has been obtained using the perturbation technique for sinusoidal modulation of small amplitude. It is shown that the wave speed in the cylinder with a corrugated outer surface is less than that in a smooth cylinder by the square of the amplitude of the surface perturbation. This theoretical prediction agrees reasonably with an experimental observation reported earlier. It is also shown that the wave speed reduction due to the surface corrugation becomes larger for a thinner cylinder and for a bigger density of corrugation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.5
• /
• pp.12-18
• /
• 1972

The relation between output SNR and mth harmonic generation is determined for nonlinear system of zero memory type, half wave and the nth power law devices with narrow band form of the unmodulated sinusoidal wave plus zero mean and stationary gaussian noise input. It is found that the optimum generation condition for harmonic component at a small input of SNR is m and n equal 2, while for large input SNR is always n equals 2.

• Journal of Power Electronics
• /
• v.9 no.2
• /
• pp.173-179
• /
• 2009

This paper proposes a new three-phase diode rectifier system with a sinusoidal input current at unity power factor and a regulated and isolated output voltage at low level. The inherent natural wave-shaping capability of the reduced kVA polyphase transformer together with an active current wave-shaping technique results in a significant reduction of input and output filter requirements associated with switching ripple and EMI. The operation principles are described along with a design example and a comparative evaluation. Experimental results on a 1.5kW prototype are provided to validate the proposed concept.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.398-402
• /
• 1999

In PWM inverter fed traction motor drive systems, the switching frequency is restricted and thus the electromagnetic acoustic noise is generated. To reduce such an audible noise, we propose the modified RSF(Randomized Switching Frequency)-PWM method. In the proposed RSF-PWM method, both triangular wave and sawtooth wave are used in one period as carrier waves. Because the proposed method has inherently the same property as sinusoidal PWM method, there is no problem of linearity. To verify the validity of the modified RSF-PWM method, computer simulations are carried out.

• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.73-83
• /
• 1993

The temporal differential equation describing the build-up of the space-charge field in the presence of square and sinusoidal alternating field in photorefractive materials is solved analytically. We also measured the average two-wave mixing gain and the full temopral gain variations in a B$i_{12}$Si$O_{20}$ crystal with applied fields of up to 7 KV/cm amplitude and 1 KHz repetition rate. It has been found that the experimental measurements agree well with the theoretical results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.976-981
• /
• 2009

This paper proposed optimal design and microcontroller driver for driving the thin-type ultrasonic motor. To find the optimal size of the stator, motions of the motor were simulated using ATILA by changing length, width and thickness of the ceramics. Two sinusoidal waves which have 90 degree phase difference were needed for driving the thin-type motor. The thin-type ultrasonic motor driver was composed of microcontroller(Atmega128), push-pull inverter, encoder and AD-converter. Microcontroller generates four square waves which have variable frequency and 25[%] duty ratio in $20{\sim}150$[kHz]. The output signals of microcontroller were converted to sine wave and cosine wave by push-pull inverter and were applied to the thin-type ultrasonic motor. The encoder and AD-converter were used for maintaining speed of the thin-type ultrasonic motor. The AD-converter controlled DC voltage of inverter in accordance with output signal of encoder. Using the driver, characteristics of the motor as speed and torque were measured.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.453-455
• /
• 1993

In this research, the digital signal processing PC board which employs TI's TMS320C25 is implemented. The board can perform following functions. spectrum analysis of speech and repetitive signal, digital filters emulation by convolution, signal generation of sinusoidal wave, rectangular wave etc.. In this system, communications between PC and DSP board. program down-loading to DSP board and recording and graphic of acquired and processed data in DSP board are executed by PC. Parallel interface and buffer memory are used in communications. Data acquisition and operation are carried out in DSP board. Resultant data are transmitted to PC and output through DAC.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.1
• /
• pp.44-51
• /
• 1996

The accurate calculation of run-up heights of long waves along the coastline is important in the view of engineering. In this paper the run-up heights of long waves are estimated by using the cnoidal wave theory which also covers both sinusoidal and solitary waves. However, the generation and the calculation of run-up heights of cnoidal waves are difficult both in laboratory and numerical experiments. In this study, the maximum run-up heights of cnoidal waves on steep slopes are computed by using the boundary integral equation model. It has been shown that the run-up heights of cnoidal waves are less than those of solitary waves, while they are larger than those of sinusoidal waves having the same wavelengths and heights. The variation of run-up heights of cnoidal waves is not a monotonic function of the wavelength. However, the run-up heights of cnoidal waves asymptotically approach that of a solitary wave as the wavelength approaches infinity. The calculated run-up heights agreed reasonably with experimental data.