• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2311-2320
• /
• 2022

The main outcomes of the experiments H2P6 performed in the thermal-hydraulics large-scale PANDA facility at PSI in the frame of the OECD/NEA HYMERES-2 project are presented in this article. The experiments of the H2P6 series consists of two PANDA tests characterized by the activation of three (H2P6_1) or one (H2P6_2) cooler(s) in an initially stratified and pressurized containment atmosphere. The initial stratification is defined by a helium-rich region located in the upper part of the vessel and a steam/air atmosphere in the lower part. The activation of the cooler(s) results i) in the condensation of the steam in the vicinity of the cooler(s), ii) the corresponding activation of large scale natural circulation currents in the vessel atmosphere, with the result of iii) the re-distribution and mixing of the Helium stratification initially located in the upper half of the vessel and iv) the continuous pressure decay. The initial helium layer represents hydrogen generated in a postulated severe accident. The main question to be answered by the experiments is whether or not the interaction of the different, localized cooler units would be important for the application of numerical methods. The paper describes the initial and boundary conditions and the experimental results of the H2P6 series with the suggestion of simple scaling laws for both experiments in terms of i) the temperature difference(s) across the cooler(s), ii) the transient steam and helium content and iii) the pressure decay in the vessel. The outcomes of this scaling indicate that the interaction between separate, closely localized units does not play a prominent role for the present experiments. It is therefore reasonable to model several units as one large component with equivalent heat transfer area and total water flow rate.

• Journal of Forest and Environmental Science
• /
• v.38 no.3
• /
• pp.195-206
• /
• 2022

Gaining an understanding of bird communities in different habitat types is essential for the conservation of ecologically important habitats. Wetlands possess different types of habitats and provide an important environment for wintering waterbird communities. This study compares avian communities in five different habitat types in the Moeyungyi Wetland Wildlife Sanctuary (MWWS), Myanmar. From December 2014 to the first week of February in 2015, bird and habitat data were collected from representative areas of five habitat types (i.e., short grassland, tall grassland, lotus fields, open water areas, and rice fields) at MWWS. We established nine sampling plots in each habitat type, and used the point quadrat method to survey habitats and the point count method to survey birds in the habitats. Simple one-way analysis of variance (ANOVA) and post-hoc tests were used to determine differences between bird communities. We made 95 detections during 19 daily visits to each of the five habitat types. During the survey period, we recorded a total of 10,389 individuals belonging to 52 different bird species, based on 7-min observations at each of the 45 point count stations. Furthermore, we detected significant differences by habitat structure (i.e., vegetation coverage, height, and density; water depth; and plant species diversity) as well as bird communities (i.e., species richness, abundance, and diversity indices). In addition, the detailed analysis of 52 avian species revealed significant differences among 45 species with respect to the mean numbers of observed individuals in the survey habitats. The findings of this study revealed significant differences in the structure and composition of waterbird communities among the five assessed habitat types. Because natural marshes provide preferable habitats for a larger number and greater diversity of birds, relative to rice fields, natural marshes should be prioritized for conservation and restoration in Moeyungyi Wetland Wildlife Sanctuary.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.3
• /
• pp.266-271
• /
• 2021

Osteoporosis associated with pregnancy and lactation is a rare disease that can cause osteoporotic vertebral compression fracture (OVCF). Patients usually complain of severe back pain, which is easily mistaken for pain due to pregnancy, childbirth, and lactation, making a rapid diagnosis and treatment difficult. The authors diagnosed OVCF related to pregnancy and lactation through a physical examination, simple radiography, whole-body bone scan, magnetic resonance image, bone marrow density, and blood tests in a 29-year-old female patient and a 31-year-old female patient who presented with low back pain. This paper reports two cases of symptom improvement through a teriparatide injection, wearing thoracic lumbar sacral orthosis and taking calcium and vitamin D with a review of the literature.

• Coupled systems mechanics
• /
• v.10 no.6
• /
• pp.509-520
• /
• 2021

Fiber-reinforced concrete (FRC) is a composite material where small fibers made from steel or polypropylene or similar material are embedded into concrete matrix. In a material model each constituent should be adequately described, especially the interface between the matrix and fibers that is determined with the 'bond-slip' law. 'Bond-slip' law describes relation between the force in a fiber and its displacement. Bond-slip relation is usually obtained from tension laboratory experiments where a fiber is pulled out from a matrix (concrete) block. However, theoretically bond-slip relation could be determined from bending experiments since in bending the fibers in FRC get pulled-out from the concrete matrix. We have performed specially designed laboratory experiments of three-point beam bending with an intention of using experimental data for determination of material parameters. In addition, we have formulated simple layered model for description of the behavior of beams in the three-point bending test. It is not possible to use this 'forward' beam model for extraction of material parameters so an inverse model has been devised. This model is a basis for formulation of an inverse model that could be used for parameter extraction from laboratory tests. The key assumption in the developed inverse solution procedure is that some values in the formulation are known and comprised in the experimental data. The procedure includes measured data and its derivative, the formulation is nonlinear and solution is obtained from an iterative procedure. The proposed method is numerically validated in the example at the end of the paper and it is demonstrated that material parameters could be successfully recovered from measured data.

• Journal of Veterinary Science
• /
• v.22 no.1
• /
• pp.14.1-14.11
• /
• 2021

Background: Quantitation of urine protein is important in dogs with chronic kidney disease. Various analyzers are used to measure urine protein-to-creatinine ratios (UPCR). Objectives: This study aimed to compare the UPCR obtained by three types of analyzers (automated wet chemistry analyzer, in-house dry chemistry analyzer, and dipstick reading device) and investigate whether the differences could affect clinical decision process. Methods: Urine samples were collected from 115 dogs. UPCR values were obtained using three analyzers. Bland-Altman and Passing Bablok tests were used to analyze agreement between the UPCR values. Urine samples were classified as normal or proteinuria based on the UPCR values obtained by each analyzer and concordance in the classification evaluated with Cohen's kappa coefficient. Results: Passing and Bablok regression showed that there were proportional as well as constant difference between UPCR values obtained by a dipstick reading device and those obtained by the other analyzers. The concordance in the classification of proteinuria was very high (κ = 0.82) between the automated wet chemistry analyzer and in-house dry chemistry analyzer, while the dipstick reading device showed moderate concordance with the automated wet chemistry analyzer (κ = 0.52) and in-house dry chemistry analyzer (κ = 0.53). Conclusions: Although the urine dipstick test is simple and a widely used point-of-care test, our results indicate that UPCR values obtained by the dipstick test are not appropriate for clinical use. Inter-instrumental variability may affect clinical decision process based on UPCR values and should be emphasized in veterinary practice.

• Journal of Surface Science and Engineering
• /
• v.55 no.3
• /
• pp.180-186
• /
• 2022

The production of hydrogen via water electrolysis (i.e., green hydrogen) using renewable energy is key to the development of a sustainable society. However, most current electrocatalysts are based on expensive precious metals and require the use of highly purified water in the electrolyte. We demonstrated the preparation of a non-precious metal catalyst based on CuCo₂O₄ (CCO) via simple electrodeposition. Further, an optimization process for electrodeposition potential, solution concentration and electrodeposition method was develop for a catalyst-substrate integrated electrode, which indicated the highly electrocatalytic performance of the material in electrochemical tests and when applied to an anion exchange membrane water electrolyzer.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.11
• /
• pp.92-99
• /
• 2021

Agricultural tractors drive and operate both off-road and on-road. Tire-road interaction significantly affects the tractive performance of a tractor, which is difficult to predict numerically. Many empirical models have been developed to predict the tractive performance of tractors using the cone index, which can be measured through simple tests. However, a magic formula model that can determine the tractive performance without a cone index can be used instead of traditional empirical models as the cone index cannot be measured on asphalt roads. The aim of this study was to predict the tractive performance of a tractor using the magic formula tire model. The traction force of the tires on an asphalt road was measured using an agricultural tractor. The dynamic wheel load was calculated to derive the coefficients of the traction-slip curve using the measured static wheel load and drawbar pull of the tractor. Curve fitting was performed to fit the experimental data using the magic formula. The parameters of the magic formula tire model were well identified, and the model successfully determined the coefficient of traction of the tractor.

• Parasites, Hosts and Diseases
• /
• v.59 no.6
• /
• pp.595-605
• /
• 2021

An understanding of the knowledges, attitudes and perceptions of different populations is key for public health policy makers. Here, a survey was performed on knowledge, attitudes, and perceptions about malaria diagnosis, prevention, control, and treatment. The 407 survey participants included both uninfected inhabitants and patients from 2 cities (Gimpo- and Paju-si) of Northern Gyeonggi-do, known as high-risk areas for vivax malaria. We used community-based study design and non-probability sampling method using the primary data. Association between variables were tested using χ²-tests. In general, the information on malaria reported by the participants in this study was unsystematic and included inaccurate details. The knowledge of malaria symptoms, identified as headache, chills and fever, was high, but the surveyed community lacks knowledge of the specific medications used for malaria treatment, with a large number of respondents having no knowledge of any form of medication. Survey questions with high correct answer rates included questions about easy treatment of malaria in Korea, the high daytime activity of malaria-borne mosquitoes, and the infection risk posed by outdoor activities. However, a large portion of the respondents was unable to provide simple medical and biological information about the disease. This study aimed to comprehensively evaluate the knowledge, attitude, and practical behavior of the surveyed community with respect to malaria and the implications reported here could be applicable to other malaria endemic areas in Korea.

• Journal of Fashion Business
• /
• v.27 no.1
• /
• pp.126-139
• /
• 2023

The purpose of this study was to investigate and verify interaction effects of collaboration and brand origin as well as fashion involvement on consumer attitudes towards global sports apparel brands and Chinese local sports apparel brands targeting Chinese consumers. A survey was conducted on 425 Chinese women aged 19 to 34 years. Data were subjected to frequency analysis, reliability analysis, t-tests, 3-way ANOVA, and simple effect analysis. Results of the study are as follows. First, fashion involvement, collaboration, and brand country of origin all had a significant effect on consumer preference of Chinese consumers when purchasing sportswear. Second, fashion involvement and collaboration in purchasing sportswear had a significant interaction effect on consumer preference. Finally, collaboration, brand origin, and fashion involvement showed significant three-way interaction effects on Chinese consumers' preferences. Results of this study can help establish an efficient marketing strategy for Chinese local sportswear brands, which are fiercely competing with global sportswear brands in the Chinese market because they can examine Chinese consumers' attitudes toward sportswear brands. To accurately compare global and local sportswear brands, it must be assumed that there are no differences in brand preferences among consumers. However, as this study selected each brand as the research brand ranked as the top preference, this aspect was not taken into consideration. Therefore, in future research, it is necessary to consider differences in brand preferences and conduct the study accordingly.

• Clinics in Shoulder and Elbow
• /
• v.25 no.4
• /
• pp.257-264
• /
• 2022

Background: Chronic subscapularis tendon tear (SBT) is a degenerative disease and a common pathologic cause of shoulder pain. Several potential risk factors for chronic SBT have been reported. Although metabolic abnormalities are common risk factors for degenerative disease, their potential etiological roles in chronic SBT remains unclear. The purpose of this study was to investigate potential risk factors for chronic SBT, with particular attention to metabolic factors. Methods: This study evaluated single shoulders of 939 rural residents. Each subject undertook a questionnaire, physical examinations, blood tests, and simple radiographs and magnetic resonance imaging (MRI) evaluations of bilateral shoulders. Subscapularis tendon integrity was determined by MRI findings based on the thickness of the involved tendons. The association strengths of demographic, physical, social, and radiologic factors, comorbidities, severity of rotator cuff tear (RCT), and serologic parameters for SBT were evaluated using logistic regression analyses. The significance of those analyses was set at p<0.05. Results: The prevalence of SBT was 32.2% (302/939). The prevalence of partial- and full-thickness tears was 23.5% (221/939) and 8.6% (81/939), respectively. The prevalence of isolated SBT was 20.2% (190/939), SBT combined with supraspinatus or infraspinatus tendon tear was 11.9% (112/939). In multivariable logistic regression analysis, dominant side involvement (p<0.001), manual labor (p=0.002), diabetes (p<0.001), metabolic syndrome (p<0.001), retraction degree of Patte tendon (p<0.001), posterosuperior RCT (p=0.010), and biceps tendon injury (p<0.001) were significantly associated with SBT. Conclusions: Metabolic syndrome is a potential risk factor for SBT, as are these factors: overuse activity, diabetes, posterosuperior RCT, increased retraction of posterosuperior rotator cuff tendon, and biceps tendon injury.