• 정보처리학회논문지C
• /
• 제16C권2호
• /
• pp.209-216
• /
• 2009

무선 센서 네트워크에서는 질의 분배(dissemination)나 이벤트 광고를 위해 플러딩이 요구된다. Simple(또는 blind) 플러딩은 폭주(implosion) 문제와 겹침(overlap) 문제를 야기하며, 따라서 simple 플러딩은 센서 네트워크의 수명을 감소시킬 수 있다. 따라서 본 논문에서는 플러딩 오버헤드를 줄이기 위해 플러딩 오버레이 구조(Flooding Overlay Structure; FOS)를 제안한다. 두 종류의 FOS 기법인 중앙형 FOS(Centralized FOS; CFOS)와 분산형 FOS(Distributed FOS; DFOS)를 제안하며, CFOS에서는 싱크가 네트워크 토폴로지 정보를 수집해서 그 정보를 기반으로 포워딩 노드를 선택하는 반면, DFOS에서는 각 센서 노드가 자신의 로컬 정보를 기반으로 자신이 브로드캐스트 패킷의 포워딩에 참여할지 여부를 결정한다. 제안한 FOS 기법들의 성능 분석을 위해 NS-2 기반의 시뮬레이션을 수행했으며, FOS 기법들과 simple 플러딩 및 gossiping의 성능을 비교했다. 시뮬레이션 결과, 제안한 FOS 기법들이 네트워크 수명 측면에서 simple 플러딩보다, 데이터 전달율 측면에서 gossiping보다 우수함을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.795-800
• /
• 2001

Two evaluation techniques of the tunnel lining concrete using ultra sonic velocity method are developed. Modified linear regression technique is proposed to enhance the corelation between the pulse velocity and the compressive strength of core specimens. And bivariate normal distribution is assumed to evaluate the quality of concrete as a terms of compressive strength. A simple corelation table between the pulse velocity and the compressive strength of core specimens are proposed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.435-440
• /
• 1994

It is considered to pressing problem that the develpment of the rapid and simple method and measuring instrument, can evaluate for quality of concrete at early period. Accordingly in this paper proposed to earlier evaluation method on quality of concrete using resistance method and ultra-sonic pulse velocity test. It was found to the possibility of development on test method and instrument through a series of fundmental investigation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.124-129
• /
• 1995

In this study proposed to rapid and simple methid of test for early evaluation of strength of cement. The obtained results through a series of experiment are summarized as follow. The resistance ratio was decreased as the increase of water-cement ratio. The compressive strength of cement was increased as the resistance ratio increase. The experimental results of compressive strength of cement is shown in the same value no relation with the kind of cement respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1990년도 추계학술대회논문집; 한양대학교, 서울; 24 Nov. 1990
• /
• pp.107-112
• /
• 1990

In the vibration analysis of structure in fluid such as ships and offshore structures, the hydrodynamic added mass considerably affects the result of analysis. Therefore correct evaluation of the hydrodynamic added mass effect is required for an accurate analysis. But the correct evaluation of the effect is not simple because the added mass varies with the mode shape of vibration as well as the configuration of the structure. The universal method employed to evaluate added mass in ship hull vibration is Lewis's method via the introduction of 3 dimensional correction factor. But this conventional method is valid only for beam-like vibration.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.423-428
• /
• 1990

A mixed IP formulation is presented which concurrently routes and sequences the tasks on the MRS, reflecting the flexible characteristics. As a preliminary work for the performance evaluation of the MRS, a two robot system working on independent tasks is studied. Models for three types of the system capable of simple error recovery function are established using queueing model, and performances are evaluated and analysed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.330-332
• /
• 2003

In this paper, It is introduced new sound quality method, FI(Fluctuation Index) and the example applied Outdoors side Air-conditioner noise evaluation. Because FI is applied with very simple algebraic calculation algorithm, it can be applied some other application without spending high time and cost.

• 전자공학회논문지B
• /
• 제28B권12호
• /
• pp.1-8
• /
• 1991

Given the set of minimal paths between two vertices in a network, this paper shows that the system reliability can be obtained by using a Binary Decision Digram. It can be done by transforming a Boolean sum of products into a Binary Decision Diagram and the reliability can be directly derived from it. The resulting reliability expression is compact and requires relatively fewer arithmetic opersations in its evaluation. Several examples are given to show that the method using Binary Decision Diagram is conceptually casy, simple and efficient.

• 한국시뮬레이션학회논문지
• /
• 제6권1호
• /
• pp.109-122
• /
• 1997

The Off-Dock Container Yard (ODCY)s in Pusan are located at 48 different places, and it causes serious problems in the container cargo transport and inland traffic near Pusan district. Hence, the analysis and evaluation of ODCY operation is important. Therefore, this paper proposes a simulation model which evaluates the operation of ODCY. It also proposes a simulation model using an object-oriented approach which includes the system is modeled with object-class hierarchy and SIMPLE++, an object-oriented simulation software, is used to develop the model.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제30권4호
• /
• pp.347-355
• /
• 2023

For numerical evaluation of Cauchy principal value integrals, we present a simple rational function with a parameter satisfying some reasonable conditions. The proposed rational function is employed in coordinate transformation for accelerating the accuracy of the Gauss quadrature rule. The efficiency of the proposed rational transformation method is demonstrated by the numerical result of a selected test example.