• 대한전자공학회논문지SD
• /
• 제46권11호
• /
• pp.1-7
• /
• 2009

본 논문에서는 short-channel intrinsic-body SDG SOI MOSFET의 문턱전압 도출을 위한 간단한 해석적 모델을 제시하였다. Intrinsic silicon 채널 영역 및 gate oxide 내에서의 2차원 Laplace 방정식을 반복법(iteration method)으로 풀어 각 영역 내에서의 전위 분포를 채널에 수직한 방향의 좌표에 대해 4차 및 5차 다항식으로 표현하였으며 이로부터 표면전위를 도출하였다. 표면전위의 최소치가 0이 되는 게이트 전압을 문턱전압으로 제안하여 closed-form의 문턱전압 식을 도출하였다. 도출된 문턱전압 표현식을 모의 실험한 결과, 소자의 parameter와 가해진 bias 전압에 대한 정확한 의존성을 확인할 수 있었다.

• 호남수학학술지
• /
• 제30권4호
• /
• pp.589-602
• /
• 2008

As a survey-type article, the paper reviews various digital topological utilities from digital covering theory. Digital covering theory has strongly contributed to the calculation of the digital k-fundamental group of both a digital space(a set with k-adjacency or digital k-graph) and a digital product. Furthermore, it has been used in classifying digital spaces, establishing almost Van Kampen theory which is the digital version of van Kampen theorem in algebrate topology, developing the generalized universal covering property, and so forth. Finally, we remark on the digital k-surface structure of a Cartesian product of two simple closed $k_i$-curves in ${\mathbf{Z}}^n$, $i{\in}{1,2}$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.526-529
• /
• 1998

In this paper, we proposed a nonlinear sliding mode controller to regulate the swinging angle of Overhead Crane System. Roughly speaking, the controller is designed to regulate an output(the swing angle) while providing internal stability. It is difficult to apply many of standard nonlinear control design techniques. In contrast to control that use a command generator and possibly a time-varying feedback, our control law is simple autonomous nonlinear controller. We analyze the stability of the closed-loop system using an $L_2$ Sliding surface conditions approach on a nonlinear feedback linearization of the system about the desired periodic orbit. One can easily extend this approach to analyze the robustness of the control system with respect to disturbances and parameter variations.

• 한국태양에너지학회 논문집
• /
• 제27권3호
• /
• pp.37-44
• /
• 2007

For the past few years, the concern for clean energy has been greatly increased. Ocean Thermal Energy Conversion(OTEC) power plants are studied as a viable option for the supply of clean energy. In this paper, the thermodynamic performance of OTEC cycle was examined. Computer simulation programs were developed under the same condition and various working fluids for closed Rankine cycle, regeneration cycle, Kalina cycle, open cycle and hybrid cycle. The results show that the regeneration cycle using R125 showed a 0.17 to 1.56% increase in energy efficiency, and simple Rankine cycle can generate electricity when the difference in warm and cold sea water inlet temperatures are greater than $15^{\circ}C$. Also, the cycle efficiency of OTEC power plant using the condenser effluent from nuclear power plant instead of the surface water increased about 2%.

• Ocean Science Journal
• /
• 제40권2호
• /
• pp.101-107
• /
• 2005

A simple analytical model is considered in an attempt to demonstrate a formation mechanism of the abyssal current in the East Sea. In this model, the abyssal currents are driven by wind through an outcrop region and flow along closed geostrophic contours. A rough estimate of the abyssal currents, arrived at by applying this model to the region of deep mixing in the East Sea, gives currents comparable to those observed, although there is an uncertainty in the surface area of the outcrop region. It seems that the spin-up of deep water by wind forcing through the region of deep winter mixing is, at least partly, an important contribution to the formation of the abyssal currents in the East Sea.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권3호
• /
• pp.157-167
• /
• 2015

In order to provide simple and accurate wave theory in design of offshore structure, an analytical approximation is introduced in this paper. The solution is limited to flat bottom having a constant water depth. Water is considered as inviscid, incompressible and irrotational. The solution satisfies the continuity equation, bottom boundary condition and non-linear kinematic free surface boundary condition exactly. Error for dynamic condition is quite small. The solution is suitable in description of breaking waves. The solution is presented with closed form and dispersion relation is also presented with closed form. In the last century, there have been two main approaches to the nonlinear problems. One of these is perturbation method. Stokes wave and Cnoidal wave are based on the method. The other is numerical method. Dean's stream function theory is based on the method. In this paper, power series method was considered. The power series method can be applied to certain nonlinear differential equations (initial value problems). The series coefficients are specified by a nonlinear recurrence inherited from the differential equation. Because the non-linear wave problem is a boundary value problem, the power series method cannot be applied to the problem in general. But finite number of coefficients is necessary to describe the wave profile, truncated power series is enough. Therefore the power series method can be applied to the problem. In this case, the series coefficients are specified by a set of equations instead of recurrence. By using the set of equations, the nonlinear wave problem has been solved in this paper.

• Journal of Chest Surgery
• /
• 제8권1호
• /
• pp.19-28
• /
• 1975

The thoracoscopic study was reported on 21 cases of spontaneous pneumothorax requiring surgical management, and clinical values of thoracoscopic examination on spontaneous pneumothorax were also discussed. patients were treated in the Department of .Thoracic Surgery, Hanyang University Hospital for the period of two Years from May 1972 to April 1974. For exact detection of etiologic factors on spontaneous pneumothorax, the thoracoscopic examination in the intrapleural space was performed in parallel with X-ray study. this study, the difference of diagnostic and therapeutic significance between radiological and thoracoscopic findings were observed and compared simultaneously. The results are summerized as follows: Patients age was distributed between 3 and 70 years old with highest incidence in the age group of sixty decade [33. 3%], and sex ratio of male to female was 5:2. The tuberculous processes which developed superficial subpleural layer in the lung parenchyme, on the pulmonary surface could be observed by thoracoscopic examination in a characteristic picture. detection ratio of pulmonary tuberculosis by the radiologic study to that by thoracoscopy was 8:2. The adhesion between the visceral and the parietal pleura which could possibly make a rupture of the alveola and the visceral pleura was found to be localized in a small area of the lung surface. The other part of the lung surface was free of the adhesion and, therefore, the movement of the lung took place completely without any difficulty. The ruptured orifice of the pleura and pathological changes surrounding the orifice can be detected by thoracoscopy, but not by other means such as radiologic examination. A single tuberculous bleb and multiple emphysematous blebs were found on 6 cases out of 21 cases of spontaneous pneumothorax. Among these cases, radiologic Study revealed the bleb only in one patient. On the other hand, the blebs were found in all the six patients by means of thoracoscopic examination. It gives the detection ratio of bleb by radiologic study to that by thoracoscopy was 1:6. By thoracoscopy, the rupture on the lung surface were visualized on the 10 patients out of a total of 21 patients [10 patients of visual rupture]. However, the rupture of the pleura was not observed on the rest of 11 patients even by thoracoscopic examination [11 patients of non visual rupture]. Five patients [50%] out of ten who had the visual rupture on the lung surface was required a surgical operation to remove pneumothorax. For the patients who were detected to have the visual rupture of the pleura by thoracoscopy, be considered in the early stage of closed thoracostomy. of 21 patients, 16 patients [11 patients of non visual rupture of the pleura and 5 patients of visual rupture of the pleura] who received no surgical management, were treated with closed thoracostomy with continuous suction, and the` pneumothorax was healed completely up in each cases. Therapeutic measures for the remaining 5 patients of visual rupture of the pleura who were subjected to surgical approach for radical treatment of spontaneous pneumothorax were accordingly complicated, and the following different procedures were properly indicated case by case, that is, rib resection thoracostomy, simple closure of ruptured visceral pleura, wedged resection of the lung, and lobectomy.

• 한국임상수의학회지
• /
• 제29권4호
• /
• pp.319-322
• /
• 2012

This case presents application of bioadhesive for inguinal hernia repair of Jeju native pigs. An inguinal hernia was diagnosed in Jeju native pigs, respectively, 3 days of age and 30 days of age, by physical and radiographic examination. Inguinal herniorrhaphy was performed under sedation with azaperone. After excision of scrotal sac, gently separated testis and intestinal loops. Herniated testis was isolated from scrotal sac and intestinal loops were replaced in the abdominal cavity. The external inguinal ring surface and skin closed using the technique of tissue adhesive. The patients were recovered without post-operative complications. This result considered that bioadhesive application could be a simple method to reduction of scrotal hernia without post-treatment like removal of sutures.

• Wind and Structures
• /
• 제22권4호
• /
• pp.429-454
• /
• 2016

In this paper, a shear deformation plate theory based on neutral surface position is developed for free vibration analysis of functionally graded material (FGM) plates. The material properties of the FGM plates are assumed to vary through the thickness of the plate by a simple power-law distribution in terms of the volume fractions of the constituents. During manufacture, defects such as porosities can appear. It is therefore necessary to consider the vibration behavior of FG plates having porosities in this investigation. The proposed theory is based on assumption that the in-plane and transverse displacements consist of bending and shear components, in which the bending components do not contribute toward shear forces and, likewise, the shear components do not contribute toward bending moments. The neutral surface position for a functionally graded plate which its material properties vary in the thickness direction is determined. The equation of motion for FG rectangular plates is obtained through Hamilton's principle. The closed form solutions are obtained by using Navier technique, and then fundamental frequencies are found by solving the results of eigenvalue problems. Numerical results are presented and the influences of the volume fraction index and porosity volume fraction on frequencies of FGM plates are clearly discussed.

• 한국멀티미디어학회논문지
• /
• 제17권7호
• /
• pp.818-828
• /
• 2014

After emerging of Microsoft Kinect, the interest in three-dimensional (3D) depth image was significantly increased. Depth image data of an object can be converted to 3D coordinates by simple arithmetic calculation and then can be reconstructed as a 3D model on computer. However, because the surface coordinates can be acquired only from the front area facing Kinect, total solid which has a closed surface cannot be reconstructed. In this paper, 3D registration method for multiple Kinects was suggested, in which surface information from each Kinect was simultaneously collected and registered in real time to build 3D total solid. To unify relative coordinate system used by each Kinect, 3D perspective transform was adopted. Also, to detect control points which are necessary to generate transformation matrix, 3D randomized Hough transform was used. Once transform matrices were generated, real time 3D reconstruction of various objects was possible. To verify the usefulness of suggested method, human arms were 3D reconstructed and the volumes of them were measured by using four Kinects. This volume measuring system was developed to monitor the level of lymphedema of patients after cancer treatment and the measurement difference with medical CT was lower than 5%, expected CT reconstruction error.