• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.210.1-210.1
• /
• 2014

The hexagonal boron nitride (h-BN) sheet, a 2D material like graphene sheet, is comprised of boron and nitrogen atoms. Similar to graphene, h-BN sheet has attractive mechanical properties while it has a wide band gap unlike graphene. Recently, many experimental groups studied the growth of single BN layer by chemical vapor deposition (CVD) method on the copper substrate. To study the initial stage of h-BN growth on the copper surface, we have performed density functional theory calculations. We investigate several adsorption sites of a boron or nitride atom on the Cu surfaces. Then, by increasing the number of adsorbed B and N atoms, we study formation behaviors of the BN flakes on the surface. Several types of BN flakes atoms such as triangular, linear, and hexagonal shapes are considered on the copper surface. We find that the formation of the BN flake in triangular shape is most favorable on the surface. On the basis of the theoretical results, we discuss the growth mechanism of h-BN layer on the copper surfaces in terms of its shapes in the initial stage of growth.

• Korean Journal of Materials Research
• /
• v.21 no.8
• /
• pp.456-460
• /
• 2011

Microelectromechanical systems (MEMS)-fabricated suspended devices were used to measure the in-plane electrical conductivity, Seebeck coefficient, and thermal conductivity of 304 nm and 516 nm thick InGaAlAs films with 0.3% ErAs nanoparticle inclusions by volume. The suspended device allows comprehensive thermoelectric property measurements from a single thin film or nanowire sample. Both thin film samples have identical material compositions and the sole difference is in the sample thickness. The measured Seebeck coefficient, electrical conductivity, and thermal conductivity were all larger in magnitude for the thicker sample. While the relative change in values was dependent on the temperature, the thermal conductivity demonstrated the largest decrease for the thinner sample in the measurement temperature range of 325 K to 425 K. This could be a result of the increased phonon scattering due to the surface defects and included ErAs nanoparticles. Similar to the results from other material systems, the combination of the measured data resulted in higher values of the thermoelectric figure of merit (ZT) for the thinner sample; this result supports the theory that the reduced dimensionality, such as in twodimensional thin films or one-dimensional nanowires, can enhance the thermoelectric figure of merit compared with bulk threedimensional materials. The results strengthen and provide a possible direction in locating and optimizing thermoelectric materials for energy applications.

• Journal of Power Electronics
• /
• v.12 no.3
• /
• pp.410-417
• /
• 2012

In this paper, a direct current control method based on a one-cycle controller (DCOCC) for double frequency buck converters (DF buck) is proposed. This control method can make the average current through the high frequency and low frequency inductors of a DF buck converter equal. This is similar to the average current control method. However, the design of the loop compensator is much easier when compared with the average current control. Since the average current though the high frequency and low frequency inductors is equivalent, the current stress of the high frequency switches and the switch losses are minimized. Therefore, the efficiency of the DF buck converter is improved. Firstly, the operation principle of DCOCC is described, then the small signal models of a one cycle controller and a DF buck converter are presented based on the state space average method. Eventually, a system block diagram of the DCOCC controlled DF buck is established and the compensator is designed. Finally, simulation and experiment results are given to verify the correction of the theory analysis.

• Journal of Distribution Science
• /
• v.13 no.7
• /
• pp.11-18
• /
• 2015

Purpose - This paper reviews the changes in the ship export and import structure between Korea and China. It utilizes the comparative advantage trade theory to analyze time-series statistical data from the market share index, revealed comparative advantage index (RCA), and trade specialization index(TSI). Research design, data, and methodology - Based on their economic phases, both Korea and China have similar country characteristics. The purpose of this research is to understand the two country's trade structures to fortify the Korea-Sino economic relationship including verifying what is working and what is not. Results - Based on the analysis, bilateral economic activity to achieve a plus trade stimulus environment should be realized in the long run. Both countries should establish guarantee-free trade negotiations and boundaries instead of various non-tariff barriers. Conclusion - Reviewing the research, a sound competitive relationship can be grown for mutual benefit including export market diversification in the near future. The review of the Korea-Sino ship industry is keenly important and investigative research about it is timely because it is a major industry in each country.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.3371-3396
• /
• 2016

Authentication protocols for multi-server architectures have gained momentum in recent times due to advancements in computing technologies and associated constraints. Lu et al. recently proposed a biometrics and smartcards-based authentication scheme for multi-server environment. The careful analysis of this paper demonstrates Lu et al.'s protocol is susceptible to user impersonation attacks and comprises insufficient data. In addition, this paper proposes an improved authentication with key-agreement protocol for multi-server architecture based on biometrics and smartcards. The formal security of the proposed protocol is verified using the widely accepted AVISPA (Automated Validation of Internet Security Protocols and Applications) tool to ensure that our protocol can withstand active and passive attacks. The formal and informal security analysis, and performance analysis sections determines that our protocol is robust and efficient compared to Lu et al.'s protocol and existing similar protocols.

• Journal of Korean Society of Transportation
• /
• v.14 no.2
• /
• pp.119-136
• /
• 1996

The evaluation of risk level or possibility of traffic accidents is a fundamental task in reducing the dangers associated with current transportation system. However, due to the lack of data and basic researches for identifying such factors, evaluations so far have been undertaken by only the experts who can use their judgements well in this regard. Here comes the motivation this thesis to evaluate such risk level more or less in an automatic manner. The purpose of this thesis is to test the fuzzy-logic theory in evaluating the risk level of traffic accidents. In modeling the process of expert's logical inference of risk level determination, only the geometric features have been considered for the simplicity of the modeling. They are the visibility of road surface, horizontal alignment, vertical grade, diverging point, and the location of pedestrain crossing. At the same time, among some inference methods, fuzzy composition inference method has been employed as a back-bone inference mechanism. In calibration, the proposed model used four sites' data. After that, using calibrated model, six sites' risk levels have been identified. The results of the six sites' outcomes were quite similar to those of real world other than some errors caused by the enforcement of the model's output. But it seems that this kind of errors can be overcome in the future if some other factors such as driver characteristics, traffic environment, and traffic control conditions have been considered. Futhermore, the application of site's specific time series data would produce better results.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.1
• /
• pp.87-99
• /
• 1992

A mathematical model, UNSATR which predicts the seepage flow through the body of dike especially under the tidal fluctuation has been developed. This model has been revised from UNSAT2 model which was developed on the basis of the saturated-unsaturated theory by Neuman. UNSATR has been verified and applied to the hydraulic model in order to estimated the seepage quantity, the formation of free water surface etc. The results lead to the following conclusions : 1. Seepage rates between the mathematical model and hydraulic model experiment are very similar to each other both in constant and transient water level conditions. 2. The lapsed time to be steady state of the free water surface becomes late as the tidal levels are relatively low mainly due to the seepage flow from the unsaturated zone of the body of dike. 3. Under the transient state of water levels, owing to the flow from the unsaturated domain, streamlines crossing to the free water surface are found and time lag during a falling tide may allow the free water surface inside the body of dike to stand at a high level than the outside water level. 4. The utility and validity of UNSATR model are convinced when the analyses on seepage problems through the porous embankment of the soil structures on the conditions of the steady and unsteady states are carried out.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.2 no.4
• /
• pp.223-230
• /
• 1990

Suspended materials during maritime construction works may cause surrounding environmental changes Therefore, it is important to know the behavior of the muddy water lumps caused by dropping soil in coastal areas. Two-dimensional behaviors of the muddy water moving along the inclined boundaries are investigated experimentally, which are the change of height, length, and moving velocity, the properties of movement at the head of muddy water, the coefficient of entrainment and shape, and the accumulation shape. The shape of the muddy water lumps was similar with the slope thermal. Therefore, the moving characteristics were found to be described using turbulence theory.

• Journal of the Korean Society for Library and Information Science
• /
• v.14
• /
• pp.19-65
• /
• 1987

Library classification schedule IS based on the classification theory, principle and the system of the classification of science. It should be consisted of the basic principle of library classification which should use the library materials effectively. Continuous study and research on the each subject field of the discipline are essential for keeping up with the transformation of each learning field and the change of modern society. In this paper, I studied comparatively the sections and subsections of the management in KDC, DDC and NDC and reviewed the academic systems of each subject area in the management. I tried to compare the relationship beween the structure of library classifications and academic systems for the more specialized subsections of the management. KDC is influenced by the principle and structure of DDC, but I found that KDC is more similar to NDC than DDC in the sections and subsections of the management. Being un sufficient of subsections of KDC and NDC, they are not enough for the expansion and specialization of the subsections in the management. DDC is necessary to re-schedule for the proper expansion of 650 and 658 with reflection of the importance of that sections and academic systems. In this study, I adoped 9 sections of management, (1) Management policy (2) Administrative organization (3) Personnel (4) Office management and business information management (5) Marketing (6) Financial management (7) Production management (8) Accounting (9) International management. It would be necessary for us to study continuously about the specilized subsubsections of the management for the more professional classification.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.11
• /
• pp.810-819
• /
• 2006

This paper proposes an Adaptive Double Buffer Model. As a new FIFO buffer model, this technique minimizes packet losses from network congestion by logically managing buffers. It allocates the spare spaces of non-congested buffers to congested buffers by allowing receive/send buffers to share two queues, and hence it minimizes packet losses. In contrast to the buffer model utilizing a free list, this buffer model can prevent the bubble phenomenon caused by a memory leak and thereby apply to a network buffer in a restricted environment. Also, compared with the model using an way, this model brings maximum 100 percent improvement in accepting packets and compared with the model utilizing a free list, this model has the similar efficiency Results of the performance test on Adaptive Double Buffer Model, shows that this proposed model decreases packet losses and enhances memory efficiency.