• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.1
• /
• pp.31-36
• /
• 2013

Acetylated Cellulose Ether (ACE), cellulose-based amphiphilic polymer with hydrophilic and hydrophobic, was synthesized and investigated in terms of its solubility and wettability for organic solvents and water. Acetyl group was substituted to the cellulose ether in a hydrophilic polymer by esterification. As a result of FT-IR, the peak corresponding to the hydroxyl group decreased and carboxyl acid peak increased with increasing reaction time and temperature, which signified the increase in the degree of acetylation of the ACE. There were similar thermal decomposition behaviors before and after esterification reaction until $800^{\circ}C$ so that the reaction occurred without significant structural changes of cellulose backbones. The solubility parameter of the ACE had a range of 18.5~26.4, and its viscosity and turbidity were controlled according to the solubility parameter of organic solvents. The ACE showed the hydrophilicity because the contact angle of the ACE was higher than the cellulose ether. These results confirmed that the ACE had the hydrophobicity and hydrophilicity due to the ether which was glucosidic bonding between the glucose units and un-reacted hydroxyl functional groups in the ACE.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.61-68
• /
• 2015

Warpage analysis has been performed for top and bottom packages of thin package-on-packages processed with different epoxy molding compounds (EMCs). Warpage deviation was measured for packages molded with the same EMCs and also the warpage deviations of top and bottom substrates themselves were characterized in order to identify the major factor causing the package warpage. For the top and bottom packages processed with thin substrates, the warpage deviation of the substrates was large, which made it difficult to figure out the effect of EMC properties on the package warpage. Top packages, where the molding area of $13mm{\times}13mm$ covered the most of the substrate area ($14mm{\times}14mm$), exhibited similar warpage behavior with changing the temperature. On the other hand, bottom packages, where the molding area was only $8mm{\times}8mm$, exhibited the complex warpage behavior due to simultaneous occurrence of (+) and (-) warpages on the same package. Accordingly, the bottom packages showed dissimilar temperature-warpage behavior even being processed with the same EMCs.

• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.120-125
• /
• 2002

AC powder EL devices were fabricated by screen printing method with the dielectric materials in insulating layer and the electrical resistivity of rear electrode. Brightness and current density were measured at voltage range of 50∼300 $V_{rms}$ to estimate optoelectrical properties of AC powder EL devices, respectively. Frequency generator was used as system producing frequency and voltage of a sine wave. Brightness and current density were measured by luminometer and multimeter. Also, dielectric constant for dielectric layer was measured by impedance analyser after preparing thick film. Dielectric constant was improved with amount of $TiO_2$ to $BaTiO_3$ powder. By applying such a process to dielectric layer of low cost AC powder EL device, brightness was improved to 50 cd/$m^2$ at similar current density. Dielectric constant $BaTiO_3$ powder by solution combustion process is better than commercial $BaTiO_3$ powder. By applying to that of low power consumption AC powder EL device, brightness was improved to 85 cd/$m^2$. Brightness of AC powder EL device was relatively decreased by control of electrical resistivity of rear electrode, current density was also decreased.

• Ocean and Polar Research
• /
• v.41 no.4
• /
• pp.275-288
• /
• 2019

We investigated flux, grain size distribution, Nd-Sr isotope composition, mineral composition, and trace metal composition (REEs and Sc) of inorganic silicate fraction (ISF, mainly Asian dust with an unrestricted amount of volcanic materials) deposited during 600~1000 ka across the Mid-Pleistocene Transition at core NPGP 1401-2A (32°01'N, 178°59'E, 5205m) taken from the central part of the North Pacific. Our results reveal about a 2-fold increase in ISF flux after 800 ka, which is associated with an increase in La/Sc and a decrease in mean grain size. Asian dusts are finer than volcanic materials and La/Sc increases with the enhanced contribution of Asian dusts. Thus, increased flux after 800 ka can be explained by the increased contribution of Asian dusts relative to volcanic materials, likely due to an intensified Westerly Jet (WJ) and the drying of the Asian continent after the MPT. Mean grain size of ISF varies systematically in relation to glacial-interglacial cycles with a decrease during glacial stages, which is consistent with the previous results in the study area. Such a cyclical pattern is also attributed to the increase in the relative contribution of Asian dusts over volcanic components in glacial stages due to intensified WJ and drying of the Asian continent. Thus, it can be concluded that climate changes that had occurred across the MPT were similar to those of interglacial to glacial transitions at least in terms of the dust budget. Different from the Shatsky Rise, however, compositional changes associated with glacial-interglacial mean grain size fluctuations are not observed in Nd-Sr isotope ratios and trace element composition in our study of the Hess Rise. This may be attributed to the location of the study site far (> 4,000 km) from the volcanic sources. The volcanic component at the study site comprises less than 10% and varies within 3% over glacial-interglacial cycles. Such a small variation was not enough to imprint geochemical signals.

• Clean Technology
• /
• v.23 no.4
• /
• pp.364-377
• /
• 2017

In this study, to improve the low surface area of domestic anthracite as raw materials of activated carbon, characteristics on chemical activation and VOCs adsorption of activated carbon according to mixing ratio of anthracite and lignite. For these, properties of raw materials, parameter characteristics of preparation processes for activated carbon, and VOCs adsorption characteristic of the prepared activated carbon are analyzed. The experimental results showed that, the domestic anthracite had disadvantages of high contents for ash and lead, arsenic, which were exceeded for the heavy metal limits, in the properties of raw materials. To improve these diadvantages, using the mixing ratio of anthracite and lignite, and the optimum conditions for pretreatment, activation, washing, and pellitization process, the activated carbon had a range of BET (Brunauer-Emmett-Teller) surface area of $1,154{\sim}1,420m^2g^{-1}$ with mesopore development and hydrophobic surface property. The carbons were satisfied with the quality standard for granular activated carbon, and had similar physicochemical properties with the commercial activated carbon. The minimum mixing condition for commercial VOCs activated carbon performance must have the caloric value of above $5,640kcal\;kg^{-1}$, and the carbon had higher adsorption capacity with order of xylene > toluene > benzene according to more higher molcular weight and hydrophobic property.

• Korean Journal of Environment and Ecology
• /
• v.26 no.2
• /
• pp.192-199
• /
• 2012

This study was to evaluate the application of microhistological analysis to collect information on food materials of korean water deer from september to October 2006. For microhistological analysis we extracted type-materials of 4 plant species ($Ipomoea$ $batatas$, $Rubus$ $coreanus$, $Glycine$ $max$, and $Pueraria$ $thunbergiana$) from fecal pellets of korean water deer ($Hydropotes$ $inermis$) and then made preparations of the fecal materials for microscopic analysis. The fecal preparations were compared with reference preparation under the microscope. In microscopic analysis of fecal preparations, we could identify the four plant species by the followings: tip shape and morphology of trichomes, epidermal cell, morphological composition and shape of stomatal apparatus, arrangement of long-cell, and distribution of crystals in cells. According to the comparisons of the preparations, the morphology of trichome, epidermal cell and stomata are similar between both preparations of the fecal pellets and the references, respectively. This methodology will contribute to understanding feeding behavior and behavioural ecology by climate change of other hervibores as well as korean water deers.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.3 s.41
• /
• pp.169-179
• /
• 2005

Acidic metavolcanic rocks distributed around the Chungju iron deposit show significantly high abundances of rare earth elements and high field strength elements. Relatively high ${\epsilon}_{Nd}$(0) values and lack of negative Nb anomaly suggest that assimilation of crustal material is not involved in their generation. They are plotted within the within-plate environment according the tectonic discrimination diagrams. Such geochemical characteristics are very similar to the acidic metavolcanic rocks of Munjuri Formation. They also show geochemical characteristics of Al-type magma of Eby (1992). All such diagnostic characters indicate differentiation of mantle-derived magma produced from the rift environment, related to the breakup of continent. In contrast to the alkali granites and the rare metal deposit both having age of c. 330 Ma, Sm-Nd isotopic data of the acidic metavolcanic rocks do not form well defined isochron. However, the alkali granites reveal low ${\epsilon}_{Nd}$(0) values, while the acidic metavolcanic rocks and the rare metal deposit both have significantly higher ${\epsilon}_{Nd}$(0) values. Considering such differences, we propose following generation hypothesis: The acidic metavolcanic rocks around Chungju iron deposit was erupted at 750 Ma as rest of the acidic metavolcanic rocks of Gyemyeongsan and Munjuri Formations. About 330 Ma ago, partial melting of existing Al-type igneous materials and some old crustal materials produced alkali granite. The rare metal deposit was also produced by redistribution of related materials within the acidic volcanics due to hydrothermal activities occurred at the same time. Sm-Nd isotopic systematics of the acidic metavolcanic rocks were disturbed during the regional metamorphic event at ca. 280 Ma.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.2
• /
• pp.146-151
• /
• 2003

Chinese medical materials of Astragalas manbranaceus Bunge, Angelica gigas Nakai, Cnidium officinale, Glycyrrhiza uralensis Fisch, Lycium Chinese Mill were mixed, mixing ratio was 28:20: 18:18:16(w/w). Yield and concentration of extract obtained through extraction- concentration process of the mixed Chinese medical materials were 37.28%(w/w) and 50Brix, respectively. Animal feed(AF) used for animal test was manufactured from both mixing of general AF and this extract(0∼ 5%, w/w) and freeze dried. After the male rats were fed experimental diets in order to test during 4 weeks, the results of plasma TG, total cholesterol, phospholipid content changes and plasma, pancreas and femur insulin concentration changes were followed. The more the amount of treatment of Chinese medical material extract are, the higher the effect of concentration decline are in plasma lipid concentration. And at 3% treatment plasma TG, total cholesterol and phospholipid contents are decreased respectively 8.62%, 2.81% and 2.11%. Plasma glucose concentration has also similar effect that those things are decreased at 3% treatment. Insulin concentration of plasma, pancreas and femur are difficult to prove the effects due to respective increase and decrease. We guess that these results comes from not experimenting intentioned rat of diabetes mellitus but normal rat.

• Journal of the Korea Concrete Institute
• /
• v.29 no.2
• /
• pp.149-157
• /
• 2017

As the amount of construction wastes increase, reuse of recycled materials is being considered in research areas. While there are many experimental investigations focusing on development of mortar and concrete using the recycled materials, the studies regarding the fiber-reinforced cement composites (FRCCs) using recycled materials are still limited. In this paper, an experimental attempt has been made to investigate the effect of recycled fine aggregates and fly ash on the mechanical properties of PVA FRCCs. The cement and natural sand were respectively replaced by fly ash and recycled fine aggregates at two content levels, 25% and 50%. Ten types of PVA FRCCs mixes were fabricated and tested to investigate the flexural, compressive and direct tensile behaviors. The test results show that flexural, compressive and direct tensile strength were decreased with increase in fly ash content at all ages. In particular, flexural, compressive and direct tensile strengths of specimens, containing 50% recycled fine aggregates and 50% fly ash, showed the lowest values. The modulus of elasticity of specimens showed similar trend to the 28-day compressive strength. Poisson's ratio was increased with increase in fly ash and recycled fine aggregates content.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.5
• /
• pp.415-420
• /
• 2011

Purpose: Calcium phosphate cement (CPC) is one of many useful materials for restoring tooth defects, periodontium and maxillofacial area. Chitosan is a biodegradable material that has been shown to promote the growth and differentiation of osteoblasts in culture. This study examined the interaction between odontoblasts and bio-calcium phosphate cement reinforced with chitosan. Materials and Methods: $5{\times}10^3$ odontoblastic cells were seeded into each well. Various concentrations of bio-calcium phosphate cement reinforced with chitosan (10, 20, 50, 100, 200, 500 ${\mu}g$/ml, 1, 2, 4 mg/ml) were diluted and added to the wells. The well was incubated for 24 h, 48 h and 72 h. After incubation, the number of cells was assessed to determine the cell viability. A cytokinesis-block micronucleus assay and chromosomal aberration test were carried out to estimate the extent of chromosomal abnormalities. Microscopic photographs and RT-PCR were performed to examine the adhesion potential of bio-calcium phosphate cement reinforced with chitosan. Results: Bio-CPC-reinforced chitosan did not show significant cytotoxicity. The number of damaged chromosomes in the cells treated with Bio-CPC-reinforced chitosan was similar to that in the control cells. There was no significant increase in the number of chromosomal aberrations in the Bio-CPC reinforced chitosan exposed cells. Microscopic photographs and RT-PCR confirmed the adhesive potential of bio-CPC reinforced chitosan to odontoblasts. Conclusion: Bio-CPC-reinforced chitosan did not affect the odontoblastic cell viability, and had no significant cytotoxic effect. Bio-CPC-reinforced chitosan showed adhesive potential to odontoblasts. These results are expected form the basis of future studies on the effectiveness of dental restorative materials in Bio-CPC reinforced with chitosan.