• Journal of Mechanical Science and Technology
• /
• v.16 no.12
• /
• pp.1594-1603
• /
• 2002

In this paper, when the initial propagation angle of a branched crack is calculated from the maximum tangential stress criterion (MTSC) and the minimum strain energy density criterion (MSEDC), it is essential that you use stress components in which higher order terms are considered and stress components at the position in a distance 0.005㎜ from the crack tip (=r). When an interfacial crack propagates along the interface at a constant velocity, the initial propagation angles of the branched crack are similar. to the mode mixities (phase angle) and the theoretical values obtained from MTSC and MSEDC. The initial propagation angle of the branched crack depends considerably on the stress intensity factor K$_2$.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.374-377
• /
• 2005

Hyundai motor company has designed a above 50kW-class PEMFC stack for Fuelcell vehicle based on SUV. Hyundai increased the power density of the stack through the optimized flowfield of bipolar plate, manifold structure, and improvement of sealing, etc. Also, Gas to Gas humidifier was adopted in fuelcell system to reduce the system humidification load, it had been proven by short stack test. Components of stack, bilpolar plate, manifold, were analyzed through the computer simulation, so temperature and pressure distribution in the components and system were improved. This stack tested in Bread Board which was organized similar to real vehicle system.

• Journal of Korean Society for Quality Management
• /
• v.21 no.2
• /
• pp.17-26
• /
• 1993

Process fault diagnosis is a complicated matter because quality control problems can result from a variety of causes. These causes include problems with electrical components, mechanical components, human errors, job justification errors, and air conditioning influences. In order to make the system run smoothly with minimum delay, it is necessary to suggest heuristic remedies for the detected faults. Hence, this paper describes a heuristic methodology of fault diagnosis that is performed using statistical patterns generated by quality characteristics The proposed methodology is described briefly as follows: If a sample pattern generated by random variables is similar to the number of prototype patterns, the sample pattern may be matched by any prototype pattern among them to be resembled. This concept is based on the similarity between a sample pattern and the matched prototype pattern. The similarity is calculated as the weighted average of squared deviation, which is expressed as the difference between the relative values of standard normal distribution to be transformed by the observed values of quality characteristics in a sample pattern and the critical values of the corresponding ones in a matched prototype pattern.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.2
• /
• pp.245-254
• /
• 2011

This paper presents a new group for multilevel converter that operates as symmetric and asymmetric state. The proposed multilevel converter generates DC voltage levels similar to other topologies with less number of semiconductor switches. It results in the reduction of the number of switches, losses, installation area, and converter cost. To verify the voltage injection capabilities of the proposed inverter, the proposed topology is used in dynamic voltage restorer (DVR) to restore load voltage. The operation and performance of the proposed multilevel converters are verified by simulation using SIMULINK/MATLAB and experimental results.

• Wind and Structures
• /
• v.11 no.2
• /
• pp.137-152
• /
• 2008

This paper discusses engineering aspects of the rear-flank downdraft that was recorded near Lubbock, Texas on 4 June 2002, and produced a gust wind speed nearly equal to the design value (50-year return period) for the region. The general characteristics of the storm, and the decomposition of the time histories into deterministic 'running mean' and random turbulence components are discussed. The fluctuating wind speeds generated by the event can be represented as a dominant low-frequency 'running mean' with superimposed random turbulence of higher frequencies. Spectral and correlation characteristics of the residual turbulence are found to be similar to those of high-frequency turbulence in boundary-layer winds. However, the low-frequency components in the running-mean wind speeds are spatially homogeneous, in contrast to the low-frequency turbulence found in synoptic boundary-layer winds. With respect to transmission line design, this results in significantly higher 'span reduction factors'.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.22.3-22.3
• /
• 2008

We present the results of the investigations of high dispersion spectra of two stars. These are the eclipsing binary RR Lyn, and $\rho$ Pup - the prototype of the group of pulsating variables. The spectra were obtained at 1.8 m Bohyuunsan observatory telescope, and 8.2 m VLT. We found the chemical composition. The both components of RR Lyn are Am stars (metallic line stars), but the abundance patterns of the components are not similar - the iron abundance and the abundances of other elements are surely different. For few elements the differences exceeds 1 dex. We found the abundances of 56 chemical elements in the atmosphere of $\rho$ Pup. This is one of the best stellar abundance patterns. It permits to investigate the role of the charge-exchange reactions in stellar atmospheres. These reactions can produce the abundance anomalies in the atmospheres of B-F type stars. These reactions can be one of the sources of galactic cosmic rays, and the reason of the braked rotation of A-F type chemically peculiar stars.

• The Journal of the Korea Contents Association
• /
• v.4 no.1
• /
• pp.76-82
• /
• 2004

In this paper, we used query evaluation method through thesaurus for retrieving Components having concept relation with any classes in a query. Queries are presented in boolean and expanded by similar table. Query expansion by thesaurus is the solution of the term mismatching and it enhanced precision and recall of the components retrieval. For efficiency evaluation of query expansion, we defined most critical value through a simulation and compared precision and recall each other.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.6
• /
• pp.78-89
• /
• 2015

Conventional EMI filters have tried to use an active EMI filter as a series by the series connection of two EMI filters for CM and DM noise. However, the proposed filter is formed into one circuit by using the active EMI filter which is able to filter CM and DM noise components together. As a result, the active EMI filter showed the outstanding quality in mass and volume under 50% and electric characteristics have been compared to the passive EMI filter in approximately 150kHz~10MHz. Furthermore, the proposed circuit has simple circuit components by comparing with the series EMI filters, and electrical characteristics are similar. The noise have been attenuated to maximum 20dBuV.

• International Journal of Reliability and Applications
• /
• v.7 no.1
• /
• pp.79-87
• /
• 2006

In this paper, some characterization results of the NBUCA class of life distributions are obtained. Behavior of the life distributions of the present class is developed in terms of the monotonicity of the residual life of k-out of-n systems given that the (n-k)th failure has occurred at time $t{\geq}0$. Similar conclusions based on the residual life of parallel system are also presented. Next, we focus upon the aging process of a system with independent but not necessarily identical NBUCA components. Finally, it is proved that if the lifetimes of a series systems with a random number of identical components have the NBUCA property then its units also have the same property.

• Journal of Ginseng Research
• /
• v.16 no.1
• /
• pp.1-6
• /
• 1992

Chemical composition was determined to evaluate the quality of Panel ginseng-leaf tea over green teas. Ginseng-leaf tea was shown to contain higher contents of soluble matter, ascorbic acid and lower contents of tannins, as compared to tea leaves. The profiles of ginsenoside and sugar of ginseng-leaf tea were noticeably different from those of ginseng roots and the sample maintained high levels of these components under the manufacturing process. Total unsaturated fatty acids and free amino acids were estimated to be decreased in ginseng-leaf tea as compared to those of ginseng leaves. The compositions of amino acids and minerals in ginseng-leaf tea were similar to those of tea leaves and glutamic acid, aspartic acid, leucine, calcium, potassium, sodium, and copper were found to be major components.