• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.307-311
• /
• 2011

이 논문은 필라멘트 와인딩 공법으로 제작된 cone형 복합재 lattice 구조물에 대한 연구이다. cone형 복합재 lattice 구조물은 helical rib과 hoop rib 구조로 이루어져 있다. 이 구조는 탄소 섬유를 에폭시수지에 함침 시켜 섬유의 끊어짐이 없이 연속적으로 실리콘 고무 금형의 홈 안에 필라멘트 와인딩 하여 제작한 것이다. 본 연구에서 cone형 복합재 lattice 구조물에 대한 설계 개념과 제작방법에 대해 기술하였다.

• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.710-718
• /
• 1995

The new forming method, Pressureless Powder Packing Forming Method was applied to the manufacturing of reaction sintered SiC. After the experiments of vibratory powder packing and binder infiltration, the abrasive SiC powder of which mean size is 45${\mu}{\textrm}{m}$ was selected to this forming method. Uniform green bodies with porosity of 45% and narrow pore size distribution could be formed by this new forming method. Also, complex or varied cross-sectional shapes could be easily manufactured through the silicone rubber mould used in this forming method. Maximum 15 wt% amorphous carbon was penetrated into green body by multi impregnation-carbonization cycles. And reaction-bonded SiC was manufactured by infiltration of SiC-carbon shaped bodies with liquid silicon.

• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.643-652
• /
• 1995

Si-SiC-graphite composites were developed by incorporating solid lubricant graphite into Si-SiC, in the light of improving tribological properties of Si-SiC ceramics. Si-SiC-graphite composites were fabricated by infilterating silicon melt into the mixture of α-SiC, carbon black and graphite powder at 1750℃ under 3 Torr. The particle size of graphite was in the range of 150 to 500㎛, and the loading content of graphite was 0, 20, 25, 30, 35 vol% in the mixture of α-SiC and carbon black. The mechanical and tribological properties of this composites were studied. The density, hardness, flexural strength, compressive strength and Young's modulus were decreased with increasing of graphite content. An additiion of solid-lubricant graphite up to 30 vol% has improved tribological properties of Si-SiC ceramics without considerable degradation of mechanical properties.

• 공업화학
• /
• 제27권4호
• /
• pp.444-448
• /
• 2016

이차전지 음극소재인 실리콘의 부피팽창을 개선하기 위하여 hollow silicon/carbon (H-Si/C) 복합체의 특성을 조사하였다. $St{\ddot{o}}ber$법을 통해 합성한 $SiO_2$에 $NaBH_4$를 첨가해 hollow 형태의 $SiO_2\;(H-SiO_2)$를 제조한 후, 마그네슘 열 환원 반응과 phenolic 수지(resin)를 첨가한 후 탄화과정을 거쳐서 H-Si/C 복합체를 합성하였다. 제조된 H-Si/C 합성물은 XRD, SEM, BET, EDX, TGA를 통해 특성을 분석하였다. 음극소재의 용량과 사이클 안정성을 향상시키기 위해서, $NaBH_4$ 첨가량에 따라 합성된 H-Si/C 복합체의 전기화학적 특성을 충방전, 사이클, 순환전압전류, 임피던스 테스트를 통해 조사하였다. H-Si/C 음극활물질과 $LiPF_6$ (EC : DMC : EMC = 1 : 1 : 1 vol%) 전해액을 사용하여 제조한 코인셀은 $SiO_2:NaBH_4=1:1$일 때 1459 mAh/g의 향상된 용량을 나타내었으며, 사이클 성능 또한 두 번째 사이클 이후 40번째 사이클까지 매우 우수한 안정성을 나타냄을 확인하였다.

• 한국항해항만학회지
• /
• 제28권6호
• /
• pp.503-507
• /
• 2004

폐 처리된 스토론튬(Sr) 페라이트를 사용하여 GHz 대역용 전파흡수체를 개발하였다. 도전손실재인 카본의 첨가에 따른 전파흡수능의 변화와 시편 제작시 제작온도 변화에 따른 전파흡수능의 변화를 조사하였다. 이와 같은 실험을 실시하여 스토론튬(Sr) 페라이트 : 실리콘 (slicone)고무 : 카본 (carbon)=80 : 13.6 : 6.4 wt%인 시편을 7$0^{\circ}C$에서 제작하여 두께 2mm인 시편에 대하여 9.4 GHz에서 -24 dB, 두께 3mm인 시편에 대하여 5.5 GHz에서 -23 dB인 우수한 전파흡수체를 개발하였다.

• 한국분말재료학회지
• /
• 제21권6호
• /
• pp.467-472
• /
• 2014

RBSC (reaction-bonded silicon carbide) represents a family of composite ceramics processed by infiltrating with molten silicon into a skeleton of SiC particles and carbon in order to fabricate a fully dense body of silicon carbide. RBSC has been commercially used and widely studied for many years, because of its advantages, such as relatively low temperature for fabrication and easier to form components with near-net-shape and high relative density, compared with other sintering methods. In this study, RBSC was fabricated with different size of SiC in the raw material. Microstructure, thermal and mechanical properties were characterized with the reaction-sintered samples in order to examine the effect of SiC size on the thermal and mechanical properties of RBSC ceramics. Especially, phase volume fraction of each component phase, such as Si, SiC, and C, was evaluated by using an image analyzer. The relationship between microstructures and physical properties was also discussed.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.459-465
• /
• 2014

In this study, Si-SiC composites were fabricated using a Si melt infiltration method using ${\beta}$-SiC/C composite powders synthesized by the carbothermal reduction of $SiO_2-C$ precursors made from a TEOS and a phenol resin. The purity of the synthesized SiC-C composite powders was higher than 99.9993 wt% and the average particle size varied from 4 to $6{\mu}m$ with increasing carbon contents of the $SiO_2-C$ precursors. It was found that the Si-SiC composites fabricated in this study consist of ${\beta}$-SiC and residual Si, without any trace of ${\alpha}$-SiC. The 3-point bending strengths of the fabricated Si-SiC composites were measured and found to be higher than 550 MPa, although the density of the fabricated Si-SiC composite was less than $2.9g/cm^3$. The bending strengths and the densities of the fabricated Si-SiC composites were found to decrease with increasing C/Si mole ratios in the SiC-C composite powders. The specific resistivities of the Si-SiC composites fabricated using the SiC-C composite powders were less than $0.018{\Omega}cm$. With increasing C content in the SiC-C composite powders used for the fabrication of Si-SiC composites, the specific resistivity of the Si-SiC composites was found to slightly increase from 0.0157 to $0.018{\Omega}cm$.

• 반도체디스플레이기술학회지
• /
• 제12권1호
• /
• pp.29-33
• /
• 2013

We have fabricated transparent polymer composite films with high thermal emissivity, which can be used for heat dissipation of transparent electronics. PMMA (poly(methyl methacrylate)) solution with high transparency and thermal emissivity is mixed with various fillers (carbon nanotubes (CNTs), aluminum nitride (AlN), or silicon carbide (SiC)) with high thermal conductivity. We have achieved the thermal emissivity as high as 0.94 by the addition of CNTs. Compared with the PMMA film on glass, however, the addition of AlN or SiC is shown to rather decrease the thermal emissivity. It is also observed that the thickness of the PMMA film does not affect its thermal emissivity. To avoid any degradation of the thermal conductivity, therefore, the PMMA film thickness is desirable to be $1{\mu}m$. There also exists a tradeoff between the optical transmittance and thermal conductivity on the selection of the amount of fillers.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.421-427
• /
• 2010

이 논문은 필라멘트 와인딩 공법으로 제작된 복합재 lattice 구조물에 대한 연구이다. 복합재 lattice 구조물은 helical rib과 hoop rib 구조로 이루어져 있다. 이 구조는 탄소 섬유를 에폭시에 함침 시켜 섬유의 끊어짐이 없이 연속적으로 실리콘 고무 금형의 홈 안에 필라멘트 와인딩하여 제작한 것이다. 본 연구에서는 lattice 구조물의 helical rib의 각도, 두께, 폭, 간격등을 안전율에 대하여 최적화 하는 이론을 제시하였다. 그리고 lattice 구조물의 제작방법을 기술하고 해석 및 시험결과를 기술하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.294-299
• /
• 2003

The efficiency of complex slurry preparation route for the development of high performance RS-SiCf/SiC composites has been investigated. The green bodies for RS-SiC and RS-SiCf/SiC composite materials prior to the infiltration of molten silicon were prepared with various C/SiC complex matrix slurries, which associated with both different sizes of starting SiC particles and blending ratios of starting SiC and carbon particles. The reinforcing materials in the composite system were uncoated and C coated Tyranno SA SiC fiber. The characterization of RS-SiC and RS-SiCf/SiC composite materials was examined by means of SEM, EDS and three point bending test. Based on the mechanical property-microstructure correlation, process optimization methodology is discussed.