• Journal of the Optical Society of Korea
• /
• v.14 no.1
• /
• pp.28-32
• /
• 2010

We demonstrate binary spectral phase coded waveform discrimination at 10 GHz for narrow band optical code-division multiple-access (NB-OCDMA) via direct electrical detection without using any optical hard-limiter. Only 9 phase-locked, 10 GHz spaced, spectral lines within a 100 GHz spectral window are used for the phase coding. Considerably high contrast ratio of 5 between signal and multiuser access interference noise can be achieved for $4{\times}10\;G\;pulse/sec$ timing coordinated OCDMA at a simple electrical receiver with 50 GHz bandwidth.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.7-16
• /
• 2015

The transmitter of quadrature multiplexed GMSK (QM-GMSK) is composed of two quadrature multiplexed GMSK modulators. QM-GMSK has a slightly increased spectrum main lobe compared with $Q^2PSK$ or QMSK, but it has highly suppressed side lobes. As a result, practical spectrum efficiency of QM-GMSK is achieved. By replacing the baseband elementary pulses of QM-GMSK with their approximate, the squared sinusoid of half-period, offset-$Q^2PSK$($OQ^2PSK$) is obtained. The $OQ^2PSK$ signal has similar spectral properties to QM-GMSK. The transmitter of $OQ^2PSK$ can be simply implemented without the Gaussian lowpass filter, which is required in QM-GMSK transmitter. In this paper, we propose an overlapped pulse shaping in $OQ^2PSK$ with RC(raised-cosine) or SRC(squared raised-cosine) pulses of length longer than the symbol period. Power spectrum of the proposed modulation scheme exhibits further suppressed side lobes, hence enhanced spectrum efficiency is obtained. Simulation results indicate that BER performance of the proposed scheme is comparable to that of $OQ^2PSK$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.715-720
• /
• 2016

In this paper, a method to design 3-dimensional (3-D) cross-lattice signal constellations with increased compactness is presented and analyzed. Here, the symbols located at the outermost sides in the conventional lattice constellation are moved symmetrically to fill in empty sides and sunken corners. While the minimum Euclidean distance (MED) among adjacent symbols remains unchanged, the presented cross-lattice constellations have 3~5% reduced average power and upto 25% reduced total volume as compared with the conventional ones. Due to the increase compactness, average power of the new 3-D constellations is lower than that of the conventional ones. As a result, computer simulation verifies that the presented cross-lattice constellations can improve symbol error performance of a digital transmission system about 0.4 [dB]. Hence, the proposed 3-D cross-lattice constellations are appropriate for low-power and high-quality digital communication systems.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.192-197
• /
• 2014

In this paper, $3^{rd}$ SDM with FDPA(Feedback Delay Pass Addition) technique to improve the input range is proposed. Conventional architecture with $3^{rd}$ transfer function is just made as adding a digital delay path in $2^{nd}$ SDM architecture. But the input range is very small because feedback path into the first integrator is increased. But, proposed architecture change feedback path into the first integrator to the second integrator, so input range could be improved about 9dB. The $3^{rd}$ SC SDM with only one operational amplifier was implemented using double-sampling technique. Simulation results for the proposed SDM designed in $0.18{\mu}m$ CMOS technology with power supply voltage 1.8V, signal bandwidth 20KHz and audible sampling frequency 2.8224MHz show SNR(Signal to Noise Ratio) of 83.8dB, the power consumption of $700{\mu}W$ and Dynamic Range of 82.8dB.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.1143-1151
• /
• 2019

In this paper, we propose a wireless transmission scheme that maximizes transmission efficiency per frequency bandwidth in a single carrier modulation scheme. The proposed scheme employs a decision directed channel tracking technique to remove both pilot signal and the guard interval signal between symbols in frames. It performs a raised cosine pulse shaping function with an roll-off factor of 0.05. In addition, 2×2 multiple input and multiple output using two polarized antennas is applied and both equalization and signal separation are performed in the frequency domain. The wireless modem with this technology confirms that the transmission speed of up to 63.3Mbps is achieved under the 5MHz frequency bandwidth

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.947-953
• /
• 2019

The purpose of this paper is to explore an ASIC design for estimating sizes and concentrations of airborne micro-particles by the means of integrating, amplifying and digitizing electric charge signals generated by photo-sensors as it receives scattered photons by the presence of micro-particles, consisting of a pre-amplifier that detects and amplifies voltage or current signal from photo-sensor that generates charges (hole-electron pairs) when exposed to visible rays, infrared rays, ultraviolet rays, etc. according to the intensity of rays; a shaper for shaping the amplified signal to a semi-gaussian waveform; two discriminators and binary counters for outputting digital signals by comparing the magnitude of the shaped signal with an arbitrary reference voltages. The ASIC with the proposed architecture and functional blocks in this study was designed with a 0.18um standard CMOS technology from Global Foundries and the operation and performances of the ASIC has been verified by the silicons fabricated by using the process.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.4
• /
• pp.19-26
• /
• 1991

$GQ^2PSK$ which is a novel digital mobile communication modulation scheme has been introduced and described. $GQ^2PSK$ is a modulation scheme that bandlimits NRZ digital data with Gaussian filter and modulates it by $Q^2PSK$ scheme which uses two shaping pulses and two carriers which are pairwise quadrature. Thus transmission bit rate can be enhanced and available signal space dimensions are more efficiently utilized, with comparison to the already-existing GMSK, QPSK and OQPSK modulation methods. Via the computer simulation, bit error rate of $GQ^2PSK$ scheme which is bandlimited by gaussian filter to be suitable for digital mobil communication, is lower than that of $Q^2PSK$ by 1.4[dB] in case that the signal-to-noise ration is 0[dB], but we have confirmed that $GQ^2PSK$ modulation scheme is approximately equivalent to the GMSK in the respect of power efficiency, and transmission efficiency of $GQ^2PSK$ is improved to 1.5 times than that of GMSK.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.8 no.2
• /
• pp.24-33
• /
• 1971

A noble method of delta modulation by means of pair transistor circuit having negative resistance charcteristic is presented. An RC parallel circuit is inserted between two eiuitter tarminals of the pair transistor circuit, and their emitters are driven by a square pulsed current source. Basically this is a relaxation oscillator circuit. But when the value of capacitors and resistanc R, and the pulse height of driving source are properly chosen, the RC parallel circuit apparently functions as integrating circuit of driviving pulses. Compared with the integrated voltage of capacitor C, a signal input voltatage supplied in series with RC parallel circuit between two emitters makes on or off either of the pair transistors. as the result, one bit pulse is sent out from the coupling resistance terminal of conducted transistor. The circuit diagram used for this experiment is presented, it i% composed with simple mod ulster circuit, differential amplifier and pulse shaping amplifier, The characteristics of the components of this ciruit are discussed, and especially quantumized noise in this delta modulation system is discussed in order to improve the signal to noise ratio which has a close relation with circut constants, quantumized voltage, pulse height and width of driving current source.

• Journal of Advanced Navigation Technology
• /
• v.1 no.1
• /
• pp.70-80
• /
• 1997

In this paper, the performances of two noncoherent code tracking loops, i. e., traditional code tracking loop(TCTL) and modified code tracking loop(MCTL) are analyzed and compared in a CDMA mobile environment. Closed-form formulas for steady-state jitter variance are derived analytically for the two schemes as a function of the pulse shaping filter, timing offset, signal-to-interference ratio, and loop bandwidth. The design issues of the loop filter are also addressed with emphasis on the second-order tracking loop. Finally, the degradation of BER performance due to timing errors is examined in a CDMA reverse link for IMT-2000 designed by ETRI.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.606-609
• /
• 2008

Deconvolution is one of the most used techniques for processing seismic reflection data. It is applied to improve temporal resolution by wavelet shaping and removal of short period reverberations. Several deconvolution algorithms such as predicted, spike, minimum entropy deconvolution and so on has been proposed to obtain such above purposes. Among of them, $\iota_1$ norm proposed by Taylor et al., (1979) and used to compared to minimum entropy deconvolution by Sacchi et al., (1994) has given some advantages on time computing and high efficiency. Theoritically, the deconvolution can be considered as inversion technique to invert the single seismic trace to the reflectivity, but it has not been successfully adopted due to noisy signals of the real data set and unknown source wavelet. After stacking, the seismic traces are moved to zero offset, thus each seismic traces now can be a single trace that is created by convolving the seismic source wavelet and reflectivity. In this paper, the fundamental of $\iota_1$ norm deconvolution method will be introduced. The method will be tested by synthetic data and applied to improve the stacked section of gas hydrate.