• Journal of Soil and Groundwater Environment
• /
• v.20 no.6
• /
• pp.55-61
• /
• 2015

Based on the literature study for the determination of perchlorate in soil we chose the ion chromatography as a measurement method and decided to use 70 mM KOH as an eluent to avoid the interference derived from the co-elution of pyrophosphate (P₂O₇⁴⁻), tripolyphosphate (P₃O₁₀⁵⁻). Also we proposed to use air dried soil through 0.15 mm sieve and distilled water as an extractant. Under the these basic concepts, we carried out the experiments to set up the detail procedure like solid to liquid ratio (S/L ratio), extraction time, device for extraction and indicating factors for quality control (e.g. precision, accuracy, MDL, LOQ). In case of time and device for extraction, 5 hours of mechanical shaking or 1 hour of centrifugation showed better precision and accuracy than that of sonication for 1 hour According to these results, we proposed the extraction method combining 5 hours of mechanical shaking with 1 hour of centrifugation. From the aspect of S/L ratio, the ratio of 1/2 or 1/3 showed resonable precision and accuracy. In case of the ratio of 1/2, there would be some problems in the separation process when the proportion of fine particle is high. Therefore, we proposed the extraction ratio of solid to liquid as 1/3 instead of 1/2. With the consideration of cost effectiveness and soil salinity, we proposed the use of cartridge for removing the interfering anions like chloride, sulfate and carbonate in specific sample such as saline soil.

• 한국해양학회지
• /
• v.7 no.2
• /
• pp.74-85
• /
• 1972

This paper studied the grain size distribution of bottom sediments of Yeongil Bay which is located at the southeastern part of the Korean Peninsula. Sixty four samples collected with snapper and dredger are analyzed by roe Tap Sieve Shaker and Pipette Method. The moment parameters are calculated with the method of Friedman(1961). Most samples are composed of sand size sediments and a few samples are composed of silt and clay. The Yeongil Bay can be divided into gravel-granule zone, sand zone, and silt-clay zone. The sediments near Yeonam- Dong and Hyongsan river are moderately sorted and others are very poorly sorted according to scheme of Friedman91962). In general, sorting values are ranged from 1.0 to 3.5. The samples near Janggigap and Masin-Dong show negative and others show positive skewness values. Skewness values are ranged from -1 to 2. All samples show the leptokurtic distribution except for the samples near Masin- dong and at the deepest place near Janggigap. Kurtosis values are ranged from -1.5 to 21.9. The samples of gravel-granule zone contain more than 50% and those of silt-clay zone contain less than 50% of CaCO$\_$3/. Four different colors, black, yellow, brown and gray, are shown in the sediments of Yeongil Bay.

• Journal of the Korean Magnetics Society
• /
• v.15 no.3
• /
• pp.191-197
• /
• 2005

In the fabrication process of Fe-based amorphous alloy powder cores by pulverization of the melt-spun ribbons and cold compaction, the effects of powder preparation method on the magnetic & electric properties, powder shapes and microstructure of cores have been investigated. The powder cores made by using rotor mill showed low effective permeability as compared to the cores prepared by ball milling. However the frequency dependence and quality factor properties were superior in the case of rotor-milling. Further the powders prepared by rotor mill had homogeneous and round shapes through strong shearing in the sieve ring, while the ball milled powders were inhomogeneous and relatively small. The lower permeability of the powder cores fabricated with rotor mill was considered to be due to the high internal stress occurred by very intensive shearing. Moreover the powder cores produced by rotor-milling showed lower core loss and good frequency dependence of effective permeability possibly due to the higher electrical insulation between magnetic particles. The dc bias property of the powder cores made by rotor-milling was better than the one by ball-milling.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1263-1263
• /
• 2001

The amounts of organic matter present in soil and the rate of soil organic matter (SOM) turnover are influenced by agricultural management practice, such as rotation, tillage, forage plow down direct seeding and manure application. The amount of nutrients released from SOM is highly dependent upon the state of the organic matter. If it contains a large proportion of light fractions (low-density) more nutrients will be available to the glowing crops. However, if it contains mostly heavy fractions (high-density) that are difficult to breakdown, then lesser amounts of nutrients will be available. The state of the SOM and subsequent release of nutrients into the soil can be predicted by NIRS as long as a robust regression equation is developed. The NIRS method is known for its rapidity, convenience, simplicity, accuracy and ability to analyze many constituents at the same time. Our hypothesis is that the NIRS technique allows researchers to investigate fully and in more detail each field for the status of SOM, available moisture and other soil properties in Alberta soils for precision farming in the near future. One hundred thirty one (131) Alberta soils with various levels (low 2-6%, medium 6-10%, and high >10%) of organic matter content and most of dry land soils, including some irrigated soils from Southern Alberta, under various management practices were collected throughout Northern, Central and Southern Alberta. Two depths (0- 15 cm and 15-30 cm) of soils from Northern Alberta were also collected. These air-dried soil samples were ground through 2 mm sieve and scanned using Foss NIR System 6500 with transport module and natural product cell. With particle size above 150 microns only, the “Ludox” method (Meijboom, Hassink and van Noorwijk, Soil Biol. Biochem.27: 1109-1111, 1995) which uses stable silica, was used to fractionate SOM into light, medium and heavy fractions with densities of <1.13, 1.13-1.37 and >1.37 respectively, The SOM fraction with the particle size below 150 microns was discarded because practically, this fraction with very fine particles can't be further separated by wet sieving based on density. Total organic matter content, mechanical texture, ash after 375$^{\circ}C$, and dry matter (DM) were also determined by “standard” soil analysis methods. The NIRS regression equations were developed using Infra-Soft-International (ISI) software, version 3.11.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.6
• /
• pp.576-585
• /
• 1991

General procedures of seed preparation as conventional guide had been established in China before most of Korean literature documented them. ‘Chwijongbeob’ (method of seed select) was to select good quality of seeds and to discard the rest. In ‘Seonjongbeob’ (method of seed grading) although China employed only ‘Sooseonbeob’ (method of seed select with water), but seeds were selected in order of selection of seeds by winds, selection of seeds by sieve and selection of seed with water in Korea. As compared with the recent techniques, those methods were perfect techniques for selection of good quality seeds of rice, except for method of seed selection by salt water was developed. The method for measurement of seed moisture, and for measurement of melted snow, spoiled urine and extracted juice by boiling water with the bone of livestock were originated from ancient China. The farming books in Korea were more or less followed the above methods. However, these techniques were complicated and impractical interms of validity and rationality. Also, it is judged that these tchniques are more appropriate in dry areas and alkaline soil of China rather than in Korean conditions. The plowing is a work to begin farming, and is operated for air ventilation between atmosphere and earth. Also, this techniques was adopted in the farming books from the early to the late Chosun dynasty without changes. Fields were deep-plowed in the first, in fall (or in spring) and for cultivation, and were shallow -plowed in the second, in spring (or in summer) and in intertillage. The former was for water reserve and land preparation, and the later was for weed control with intertillage. However, plowing in fall which was different from fallowing in dry areas, was recommended in Korea (Jikseol). but was not practiced in Sejongsilrok. This was changed with time, and plowing for cultivation in Korea was interrelated with use of green manure crops, method of plowing of upseting plough, method of manure practice and sometimes dry plowing. In addition, until the 15th century method of using a kind of plowing-tool made of log as farm tools was created to support reclamation for enlargement of farm land in mountaineous and coastal areas. For desolate farm lands by many internal and external disturbances, one tried to recover yield ability by increasing labor productivity from the 17th or 18th century. To do this, ‘Banjongbeob’ (culture method by upset plowing weed control) and ‘Hwanubeob’(culture method by firing weed control) which were cultural methods of ancient China were readapoted but the results were not clearly informed. Also, the reality of those was reexamined in the end of the Chosun dynasty.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.81-103
• /
• 1998

The purpose of this study was to compare and evaluate the differences in masticatory performance, muscle activity, and patterns of occlusal contact between persons with natural dentition and removable partial denture wearers. Twenty healthy adult subjects with more than 28 teeth and thirteen removable partial denture wearers that classified Kennedy classification I was selected. The degree of pulverized rice and peanut was measured and analyzed by means of sieving method to compare the masticatory performance. For the muscle activity, EMG was recorded in selected muscles(Temporalis and masseter muscle) during mastication and resting state. The occlusal record in maximal intercuspation was taken with a silicone occlusal bite registration material for analysis of the patterns of occlusal contact. The obtained results were as follows: 1. When chewed peanuts, masticatory performance ratio at 10-sieve size was 81.31% in natural dentition group. In removable partial denture wearer, 27.01% without RPD and 69.09% with RPD. When chewed rice, 42.04%, 11.87%, and 21.58%, respectively. The differences of masticatory performance ratio between groups were statistically significant at the 0.05 level. 2. The mean EMG value in resting state was $1.06{\mu}V$ on temporal muscle, $0.98{\mu}V$ on masseter muscle in natural dentition group. In removable partial denture wearers, $1.13{\mu}V$ on temporal muscle, $1.05{\mu}V$ on masseter muscle without RPD and $1.11{\mu}V$ on temporal muscle, $1.04{\mu}V$ on masseter muscle with RPD. 3. The mean EMG value during mastication was $45.64{\mu}V$ in natural dentition group, and in removable partial denture wearers, $22.06{\mu}V$ without RPD and $31.01{\mu}V$ with RPD when chewed peanuts. When chewed rice, $45.24{\mu}V,\;25.53{\mu}V\;and\;32.14{\mu}V$, respectively. The differences of mean masticatory EMG value between groups were statistically significant at the 0.05 level. 4. The number of posterior occlusal contact point was 20.15 in natural dentition group and 11.92 in removable partial denture wearers. The area of perforated surface was $16.50mm^2$ in natural dentition group and $6.06mm^2$ in removable partial denture wearers. The area of contact surface was $78.93mm^2,\;51.52mm^2$, respectively. 5. The area of contact surface was effective to masticatory performance ratio in natural dentition group and removable partial denture wearers (p<0.05). From these results, it is concluded that in partially edentulous patient, masticatory efficiency can be improved by removable partial denture wearing, and for efficient mastication, tight occlusal contact surface shoud be maintained by maximum support that is provided from mucosa.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.3
• /
• pp.370-374
• /
• 2003

Cell cracking method using a non-collision was evaluated for the possibility of new red ginseng grinding technique. Based on particle size distribution analysis by 1size shaker, the ratios of 100 mesh penetrated particles were 94.9% for hammer mill (group A) and 95.6% for cell crack (group B). The ratio of 120 mesh penetrated particle of group A was higher than that in group B. The particle size distributions for 100 mesh non-penetrated Powder between 2 groups were not significantly different, and particle size distribution analysis by laser scattering analyzer showed that the particle size ranges were 0.77~128.07 ${\mu}{\textrm}{m}$ for group A and 4.24~180.07 ${\mu}{\textrm}{m}$ for group B. The Particle size distribution in group A was more broad than that in group B. The mean particle size in group B was larger than that in group A, while the standard deviation of particle size distribution in group B was less than that in group A. Structural surface characteristics, in group A, particle size distribution was broad and the distribution curve was amorphous. The structure of individual particles was similar to unequal stone which was roughly grinded and had soft cotton-like surface. In the contrary, in group B, particle size distribution was relatively narrow and also individual size particles were ubiquitously distributed. The structure of individual particles was unequal cut stone shape.

• Korean journal of food and cookery science
• /
• v.28 no.5
• /
• pp.605-612
• /
• 2012

In comparison of the antioxidant activities by the different extraction methods of the domestic mung bean varieties, 'Geumsung', 'Dahyeon', 'Sohyeon', and 'Eohul', were soaked and dehulled, with the extracts obtained by using 80% ethanol at room temperature or heated. The mung bean hull was freeze-dried, ground, and passed through 100 mesh sieve. The moisture content of the hull powder ranged from 1.70 to 3.15%. The total dietary fiber content ranged from 84.42 to 88.47%, with the Sohyeon hull showing the highest value. The L value of Geumsung hull (62.93) was the highest, and the a value of Sohyeon hull (-1.69) was the lowest (p<0.05). The color difference was the highest in Dahyeon hull (42.52) and lowest in Geumsung hull (38.52). The Eohul hull's chlorophyll a and b contents were the highest with the 80% ethanol extract by heating (10.55 and 6.12 ${\mu}g/mL$, respectively), but the Sohyeon hull showed the highest in 80% ethanol extract at room temperature (7.63 and 3.93 ${\mu}g/mL$, respectively). The total phenolic and total flavonoid contents of the ethanol extracts were significantly different between the varieties regardless of the extraction temperature. The hull extract from the heating extraction was higher in Eohul than in other varieties, and was the lowest in the Dahyeon variety. The extract from Sohyeon hull at room temperature showed the highest contents of total phenolic and flavonoid contents. In the mung bean hull extract by heating, DPPH and ABTs radical scavenging activity ranged from 13.49-16.75% and 22.93-39.42% respectively and those at room temperature ranged from 39.86-41.88% and 49.71-70.92%. The reducing powers of extracts by heating ranged from 7.29 to 9.36 mg BHT/g hull, and at room temperature, they ranged from 19.90 to 20.97 mg BHT/g hull. Our results indicate that different extraction methods influenced antioxidant activities in the domestic mung bean varieties.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.2
• /
• pp.227-242
• /
• 2019

This paper presents a method to predict ground types ahead of a tunnel face utilizing operational data of the earth pressure-balanced (EPB) shield tunnel boring machine (TBM) when running through soil ground. The time series analysis model which was applicable to predict the mixed ground composed of soils and rocks was modified to be applicable to soil tunnels. Using the modified model, the feasibility on the choice of the soil conditioning materials dependent upon soil types was studied. To do this, a self-organizing map (SOM) clustering was performed. Firstly, it was confirmed that the ground types should be classified based on the percentage of 35% passing through the #200 sieve. Then, the possibility of predicting the ground types by employing the modified model, in which the TBM operational data were analyzed, was studied. The efficacy of the modified model is demonstrated by its 98% accuracy in predicting ground types ten rings ahead of the tunnel face. Especially, the average prediction accuracy was approximately 93% in areas where ground type variations occur.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1615-1615
• /
• 2001

During the past ten years, Near Infrared Spectroscopy has been successfully applied to the analysis of a great variety of agriculture products. Previous works (Morra et al., 1991; Salgo et al., 1998) have shown the potential of this technology for soil analysis, estimating different parameters just with one single scan. The main advantages of NIR applications in soils are the speed of response, allowing the increase of the number of samples analysed to define a particular soil, and the instantaneous elaboration of recommendations for fertilization and soil amendment. Another advantage is to avoid the use of chemical reagents at all, being an environmentally safe technique. In this paper, we have studied a set of 129 soil samples selected from representative glasshouse soils from Southern Spain. The samples were dried, milled, and sieved to pass a 2 mm sieve and then analysed for organic carbon, total nitrogen, inorganic nitrogen (nitrate ammonium), hygroscopic humidity, pH and electrical conductivity in the 1:1 extract. NIR spectra of all samples were obtained in reflectance mode using a Foss NIR Systems 6500 spectrophotometer equipped with a spinning module. Calibration equations were developed for seven analytical parameters (ph, Total nitrogen, organic nitrogen, organic carbon, C/N ratio and Electric Conductivity). Preliminary results show good correlation coefficients and standard errors of cross validation in equations obtained for Organic Carbon, Organic Nitrogen, Total Nitrogen and C/N ratio. Calibrations for nitrates and nitrites, ammonia and electric conductivity were not acceptable. Calibration obtained for pH had an acceptable SECV, but the determination coefficient was found very poor probably due to the reduced range in reference values. Since the estimation of Organic Carbon and C/N ratio are acceptable NIIRS could be used as a fast method to assess the necessity of organic amendments in soils from Mediterranean regions where the low level of organic matter in soils constitutes an important agronomic problem. Furthermore, the possibility of a single and fast estimation of Total Nitrogen (tedious determination by modifications of the Kjeldahl procedure) could provide and interesting data to use in the estimation of nitrogen fertilizer rates by means of nitrogen balances.