• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.20
• /
• pp.107-114
• /
• 1975

To develop the technics of generation shortening for the breeding of rape oil composition. effect of the ethrel and hydroperoxide treatment for the increasing of germination ability during maturing period was investigated. It was the most effect ire for a generation shortening that the seeds after, 10 days treated with $H_2O$$_2$-0.5% and 2, 000ppm of ethrel and after 15 days treated with $H_2O$$_2$-0.5% and 500ppm of ethrel on 15 day after flowering were germinated 76% and 90% respectively. It suggested that effect of ethrel and hydroperoxide was multiple and 4-5 generations could pass in a year because one generation needed only 66-71 days.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.183-199
• /
• 2001

Alternative way of shaping fibers suitable for papermaking was introduced. Impact refining, which was done simply by hitting wet fibers with a metal weight vertically, was intended to keep the fibers from shortening and to cause mostly internal fibrillation. Virgin chemical pulp, its recycled one and OCC were used in the experiment. It was noticed from the experiment that impact refining on virgin chemical pulp kept the fiber length and Increased bonding properties greatly, However, in the recycled fibers from the chemical pulp, fiber length and bonding properties were decreased. In OCC, which seems to contain fractions of semi-chemical pulp and mechanical pulp (GP), and which is recycled pulp from corrugated boxes, fiber length and bonding properties were decreased disastrously. We believe recycled cellulosic fibers (recycled chemical pulp and OCC in this case), which went through hornification, were less resistant to the mechanical impact than virgin chemical pulp. For virgin chemical pulp, impact refining allowed no significant fiber length shortening, high WRV, and high mechanical strength.

• Journal of Powder Materials
• /
• v.15 no.3
• /
• pp.188-195
• /
• 2008

Carbon nanotube (CNT)/$Mg_2Ni$ composites were synthesized to enhance the hydrogen storage properties. The emphasis was made on the effect of different shortening methods of CNTs on the open-tip structure and the resulting properties. The use of open CNTs as a starting material resulted in an enhanced hydrogen properties of CNT/$Mg_2Ni$ composites. Among the employed methods for the shortening of CNTs, wet milling using ethanol was the most efficient, while ultrasonic acid treatment or thermal decomposition resulted in a less hydrogen storage capacity.

• Journal of Ginseng Research
• /
• v.6 no.1
• /
• pp.56-66
• /
• 1982

The effects of various dehiscent application such as dehiscent materials (big chaffs, vermiculite etc.), growth regulators and agricultural chemicals (plant protector.) on stimulation of dehiscence and shortening of dehiscent period were investigated Results obtained were as follows : 1. The moisture content of endosperm and seed coat at 10 day after dehiscent application amounts between 40% and 50%. 2. Endosperm diameter was increased with time of stratification, and the embryo growth showed in linear function, 3. Non-dehiscent seed showed also normally development of embryo, and the property of dehiscence dependent from physico-chemical nature of ginseng seed coat. 4. The best dehiscent materials were big chaffs and followed vermiculite, sand and sand with big chaffs. 5. The effect of dehiscence of ginseng seed showed higher activity in fungi than in bacteria in general. 6. Agricultural chemicals ( plant Protector) reduced the dehiscent rate of ginseng seed 7. The best timing of dehiscent treatment was between August 1 and August 10 but the smaller amount of dehiscent rate after August 10 dehiscent appllication indicated that big chaffs and growth regulator treatment may be controlled shortening of dehiscent period of ginseng seed.

• International Journal of High-Rise Buildings
• /
• v.4 no.3
• /
• pp.209-217
• /
• 2015

Outrigger systems are highly efficient since they utilize the perimeter zone to resist lateral forces, similar to tubular systems. The entire structural weight can be reduced due to the system's significant lateral strength. Therefore, it is the most commonly selected structural system for tall and supertall buildings built in recent years. In this paper, issues regarding the differential shortening effect during construction of the outrigger system and the special joints used to solve these issues will be addressed. Additionally, the characteristics of wind and seismic loads in Korea will be briefly discussed. Lastly, buildings in Korea using an outrigger as their major structural system will be introduced and the structural role of the system will be analyzed.

• Journal of Drive and Control
• /
• v.7 no.1
• /
• pp.33-37
• /
• 2010

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.44-51
• /
• 2006

In this paper, the resonance characteristics of zigzag wire dipole antennas are first analyzed by the method of moment(MOM) for shortening the space occupation length of straight wire dipole antenna Considering the shortening effect the integrated zigzag dipole antennas with the simplified microstrip feed are designed. Since the integration gives rise to discontinuities due to antenna line width with abrupt bend angles, the compensation by the chamfer is applied. Futhermore the integrated parasitic zigzag lines are properly attached to both sides of substrate for compensation of the effect of the dielectric substrate, hence improving the resonance characteristic. The design results at UHF and ISM band are verified with experiments.

• Plant Resources
• /
• v.5 no.2
• /
• pp.155-160
• /
• 2002

The heading date is known to be controlled by two kinds of genetic constituent, photosensitivity and basic vegetable phase. For the latter, the effect of temperature in early growth period is critical to determine the shortness of vegetative growth periods in plant's life. A phytotron experiment on 55 rice cultivars, consisting of two ecotypes of rices, indica and japonica, was conducted at high and low temperature treatments at early growth stage to investigate the possible role of plant growth stimulus by high temperature to associate with shortening of heading date. The high temperature during the early growth stage stimulated the rice growth as measured by plant height with much difference of the growth response between indica and japonica. The conclusive finding that these growth stimulus in early growth stage was highly correlated with the acceleration of heading is, more or less, correlated with the heading of the late growth stage although we could not conclude the genes for early plant growth stimulus by high temperature is the same genes as the genes for accelerating of heading in the late growth stage of plants.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.653-659
• /
• 2015

The aim of this study is to develop a technique for the accelerated life test of the capacitor in a propulsion control device of a traction inverter used for a high-speed train. Using this technique, the accelerated life test can possibly estimate the life cycle of a capacitor under various temperature conditions and irregularly applied voltage. The accelerated life test is conducted for the capacitor of the traction inverter. The common proceedings of this test are selection of failure mechanism, determination of accelerated stress, range determination of the accelerated stress, determination of the test condition, and distribution and determination of the sample. From this result, the continuous applied voltage was not considered for the acceleration factors anymore. Therefore, the final result having an acceleration factor of 9.4 (= 13,626/1,445) was observed. Furthermore, the life-shortening acceleration effect for the irregular applied voltage condition can be applied to various situations.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.132-142
• /
• 1996

This paper presents a technique to model and control a manipulator which has a flexible link and moves in a vertical plane. The flexible link is modeled as an Euler-Bernoulli Beam. Elastic deformation of the flexible link is represented using the assumed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. This paper presents a simple technique to improve the correctness of the developed model. The final model including the shortening effect due to elastic deformation correlates very well with experimental results. The free body motion simulation shows that two assumed modes for the representation of the elastic deformation is proper in terms of the model size and correctness. A control algorithm is developed using PID control technique. The proportional, integral and derivative control gains are determined based on dominant pole placement method with a rigid one-link manipulator. A position control simulation shows that the control algorithm can be used to control the position and residual oscillation of the flexible one-link manipulator effectively.