• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.103-108
• /
• 2005

In this study, to develop a flash-less mold for forming of shoe-outsole, experiments and forming analysis were carried out. In order to reduce the extra-materials, offset method and mass distribution method are used in the preform design. The vertical mold structure pressing the preform was introduced to produce a flash-less shoe-sole. To measure the contact status of parting surface of mold, the pressure film has been used. The guide-gutter system and the continuous pressing mold have been developed for the discharge of extra-materials and re-pressing. By the investigation, flash of shoe-outsole was considerably reduced.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.207-212
• /
• 2001

In this paper, dynamic stability and vibration characteristics of a flexible shoe in drum brake systems are investigated. The frictional force between the drum and the shoe is assumed as a distributed frictional force, while the shoe is modeled as an elastic beam supported by two translational springs at both ends and elastic foundations. Governing equations of motion are derived by energy expressions, and numerical results are calculated by finite element method. Through the numerical simulation, critical distributed frictional forces are calculated by changing the stiffness of two translational springs and elastic foundation parameters. It is also shown that the beam loses its stability by flutter and divergence depending on the stiffness of elastic supports and elastic foundation parameters. Finally, the time responses of the beam corresponding to their instability types are demonstrated.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.149-156
• /
• 1998

In suspension bridges, the axial farces in the wires are transferred by side pressure on the semicircular face, and further from the strand shoe through rods to a base plate fixed to the massive concrete part of the anchor block. For prefabricated strands the most common way of anchoring is by socketing the ends of the strands. In this study, strand shoe and hanger socket are analyzed far various load conditions using Finite Element Method. The finite element models are built using MSC/PATRAN and analysis is carried out using MSC/NASTRAN. Results are again completely processed using MSC/PATRAN. From the results of the analysis, trends of deformation and stress distribution are reviewed and important factors to consider in the design of strand shoe and hanger socket are discussed.

• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.110-117
• /
• 2002

This paper proposes a optimization of the design variables of linear motor for the improvement of thrust. Especially, this paper treats the shoe, which can be good to flow of a magnetic flux in linear motor. Firstly, this paper uses a space harmonic analysis method(SHAM) based on Fourier series, for analyzing the characteristics of core type linear motor, including slot structure and shoe. And compare the magnetic flux densities of linear motor at air gap with the results of the SHAM and the Finite Element Method(FEM). Secondly, this paper uses a genetic algorithm, which is good to find the global solutions. The design variables are the pole pitch of magnet, the pitch of slot, the height of slot, the width of shoe and the width of magnet. The maximum thrust with optimum design variables is about 247 N which is improved about 16%.

• 한국멀티미디어학회논문지
• /
• 제9권8호
• /
• pp.1010-1019
• /
• 2006

캐드(CAD) 시스템은 우리가 사용하는 대부분의 산업 제품을 제작하는데 필수적으로 사용되고 있는 중요한 기술로 알려져 있다. 캐드 기술은 컴퓨터 그래픽스 기술의 발달과 더불어 상업용 3차원 캐드 시스템으로 영역을 확장해 나가고 있다. 특히, 신발제조와 같은 특수한 영역의 캐드 시스템들도 3차원 캐드로 발전해 나가고 있다. 그러나 캐드 소프트웨어의 개발의 어려움으로 인해 소수의 메이저급 캐드 소프트웨어 회사를 제외하고는 대부분이 3차원 개념을 제공하는 AutoCAD에 종속적인 소프트웨어를 개발하고 있다. 뿐만 아니라 실제의 작업 현장에서 일하는 많은 신발 캐드 디자이너들은 직접 신발 디자인을 종이에 그리는 교육을 받아 3차원 캐 보다는 2차원 캐드에 더 익숙하고, 작업 효율도 훨씬 뛰어남을 보이고 있다. 이에 본 연구에서는 현장 실무자들의 작업 방식과 3차원 캐드 소프트웨어가 주는 장점을 결합한 3차원 신발 캐드 시스템을 설계 할 것이다. 본 시스템은 다른 신발 캐드 시스템들과 달리 OpenGL을 기반으로 하여 어느 플랫폼에서 잘 작동하도록 설계할 것이다. 또한 3차원 신발 설계 시스템에서 가장 중요한 부분인 3차원 캐드데이터와 2차원 캐드 데이터의 호환 방법을 제시하고, 다양한 크기의 신발 제작에 필수적인 여러 할출(grading) 기법을 제시할 것이다.

• 한국생활과학회지
• /
• 제15권4호
• /
• pp.651-658
• /
• 2006

This study was performed to provide the analysis on their size and the structural factors required in the process of design and manufacture of school girls' shoes. 371 elementary school girls in Kyungin and Youngnam area were participated in the size measurement. 25 foot items and 6 main body items were measured directly or indirectly using a digital photography. The results of the study are as follows: first, by most of measured items, the range of their foot size was very wide from the size of toddlers to adults'. That shows that the change of school girls' foot size occurred with their growth is pretty big. Second, from the structural factor analysis on 25 foot items, five factors were extracted such as 'the size of the foot', 'the volume of the foot,' 'the height and inclination of the foot,' 'the shape of the foot,' and 'the inside and outside inclination of the foot'. Third, from the cluster analysis, three clusters were classified: Cluster 1 was the group of 10 to 11 year old girls who had big-sized feet. The elementary school girls in the fourth to sixth grade belonged to this group. Cluster 2 consisted of girls who had small-sized and big-volumed feet. Cluster 3 had medium-sized and slim-shaped feet. Most of 6 to 7 year old elementary school girls belonged to this group. The above-mentioned results imply that many continual researches are required on children's shoe production reflecting the change of elementary school girls' feet size owing to their growth. The quantitative data on elementary school girls' feet size in this study could be used as basic information for the development of children's shoe design and its production.

• 한국의상디자인학회지
• /
• 제20권4호
• /
• pp.147-162
• /
• 2018

The purpose of this study is to conduct a comprehensive and objective evaluation on the effectiveness of the activation policies for the Seongsu handmade shoe industry and to suggest the direction of more effective future policies using the results. The list of the activation policies for the Seongsu handmade shoe industry was investigated and awareness, appropriateness, effectiveness, and satisfaction were measured from the representatives of the Seongsu handmade shoe companies via an off-line survey. A total of 61 usable data sets were statistically analyzed. Based on the evaluation result of the policies, a focus group interview with 6 representatives of the Seoungsu handmade shoe industry was conducted to investigate the causes and effectiveness of the policies and the problems pertaining to those policies. The awareness, effectiveness, and satisfaction of the policies were evaluated as negatives, while the appropriateness of the policies was evaluated as a positive. The manufacturers of the handmade shoes evaluated policies that improve the environment of the workplace higher and evaluated the handmade shoes education policy lower than the distributors and raw materials suppliers. The problems with the activation policies for the Seongsu handmade shoes industry were found to be structural problems, issues with the implementation of the policies, and that the fact that the policies did not reflect the reality of the industry.

• 한국콘텐츠학회논문지
• /
• 제16권2호
• /
• pp.186-199
• /
• 2016

구두를 제작하는 기본 틀인 라스트는 3차원 형상과 관련된 정보와 기술이 총체적으로 집약된 결과물이다. 해외에서는 이미 3D 프틴팅 기술을 이용한 구두 제작이 상용화 단계에 도달하였으나, 국내에서는 아직 도입 초기 단계이다. 본 연구에서는 국내 제화산업의 경쟁력 확대를 위해, 3D 스캐닝, 3D 모델링, 3D 프린팅의 첨단 기술로 구성된 3D 제작 프로세스를 라스트 제작에 도입하였다. 이를 위해, 2010년도 SizeKorea에서 3D 스캔한 30대 남성 200명의 3D 발 형상을 사용하여, 요인분석, 군집분석을 실시하고, 3개의 발 유형을 분류한 후, 각 유형별 대표모델을 선정하였다. 대표모델들의 3D 스캐닝 형상에서 XY, YZ, XZ평면의 단면도들을 추출하고, 라스트 모델링의 스케치 단면으로 사용하였다. Solidworks CAD를 사용하여 라스트를 3D 모델링하였으며, 보급형 3D 프린터인 MakerBot Replicator2로 3D 프린팅 하였다. 본 연구 결과는 국내 제화산업에서 3D 프린팅 기술의 상용 가능성을 보여주었다. 3D 스캐닝, 3D 모델링, 3D 프린팅의 3단계 생산설계 방식은 향후 의류패션산업 전 분야에서 폭넓게 사용될 것으로 기대된다.

• 한국의류학회지
• /
• 제28권2호
• /
• pp.312-319
• /
• 2004

The purpose of this study is to provide information for the manufacturer of shoes. The data was collected through a questionnaire on purchasing practices, wearing state and overall satisfaction with shoes for high school students. The questionnaire survey was conducted on 598 high school students(49.2％ male students, 50.8％ female students) in the Cheongju area. Statistical tests such as frequencies, percentages, and crosstabs were conducted to analyze the data. The results were as follows： 1) The main reasons for buying new shoes were replacing worn out shoes or color and design coordination with other apparel. 2) Male students bought shoes generally from shoe stores and sports brand retailers, but female students bought mainly from shoe stores. The order of criteria considered for purchasing was design, size, price, color, style coordination and comfort. 3) While attending school, male students geneially wore sports shoes, but female students wore sports shoes and dress shoes by similar ratio. 4) The male students used primarily ordinary sports shoes and casual shoes secondarily, and for female students, primarily ordinary sports shoes and sneakers secondarily. 5) They were satisfied with shoe design and color but quality of the material and durability were unsatisfactory. 6) When they wore shoes for long hours, they experienced fatigue of the whole leg and general discomfort, blisters on the feet, and red skin.

• 한국운동역학회지
• /
• 제18권3호
• /
• pp.1-10
• /
• 2008

운동화의 바닥에서 발생하는 마찰력은 착용자의 기동 능력에 많은 영향을 미친다. 이러한 마찰력은 아웃솔의 경도와 마모율, 소재, 바닥재, 바닥제의 상태, 그리고 무늬의 모양에 영향을 받는다. 본 연구는 운동화 아웃솔의 무늬와 바닥에서 발생하는 마찰력과의 상관 상관관계를 연구하고자 한다. 현장에서 생산 판매되고 있는 운동화를 조사하여 바닥창의 무늬를 분류하고 상호 비교를 위한 설계인자를 도출하였다. 기본적인 바닥창의 무늬 중에 일자형 무늬, W자형 무늬, 물결형 무늬와 O형을 검토의 대상으로 선정하였으며, 아울러 무늬의 깊이, 피치, 기울기를 설계인자로 선정하였다. 각각의 무늬와 설계 인자에 대하여 시편을 제작하고, 실험을 수행하여 마찰계수를 구하고 통계적 방법을 이용하여 설계인자에 대한 영향을 분석하였다.