• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.876-880
• /
• 2000

Vibration problem of deckhouse structure in a container vessel was investigated through the analysis and measurement. The natural frequency of deckhouse structure was found to be resonant with main engine 4th order excitations in the operating range, major sources of which were main engine inertial moment and axial thrust of the propulsion shafting system. To investigate and solve the problem, exciter test was performed to identify the vibration chracteristics of the ship structure and mechanical balancer was installed to compensate the 4th order inertial moment. Measurement results under the conditions with and without balancer operating were compared and analyzed to confirm the balancer effect. Good coincidence was found between the measurement and analysis results, which made it possible to predict the vibration problem in the earlier design stage.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.942-947
• /
• 2002

In this study, reduction of airborne and structure-borne noise of naval ship pump is presented. Since piping system arrangement such as valve location, flexible joint, pipe diameter and elbow location, discharge basin affect greatly on the noise measurement, care must be taken to minimize the unnecessary noise from the piping system. It is shown that structure-borne noise of the motor with single resilient mount system exceeds criterion. Therefore, it is concluded that double resilient mount system is inevitable. Two kinds of mount is studied for upper mount; spring and rubber type. Although both mounts show good performance at low frequency including rpm frequency, 63Hz, spring mount is found to be inadequate at high frequency, because spring coil acts as a path for SBN.

• 한국항해항만학회지
• /
• 제42권2호
• /
• pp.79-86
• /
• 2018

Common Maritime Data Structure (CMDS) is commonly used by shore and ship users in e-Navigation data domain. In the overarching of e-Navigation architecture, IHO uses S-1XX, a digital exchange standard for next-generation marine information, as data exchange standard. The current CMDS has the advantage of intuitively recognizing the overall structure of e-Navigation. However, it has disadvantage in that it does not allow stakeholders to easily understand benefits that e-Navigation can provide when implementing e-Navigation. In this study, the direction of improving existing system for effective e-Navigation implementation was proposed considering RCOs (Risk Control Options) with expected composition of ship/ shore/ communication system by sector.

• Structural Engineering and Mechanics
• /
• 제57권2호
• /
• pp.281-294
• /
• 2016

The paper is devoted to study a mesh-free analysis method of structural elements of engineering structures based on B-spline Wavelet Basis Function. First, by employing the moving-least square method and the weighted residual method to solve the structural displacement field, the control equations and the stiffness equations are obtained. And then constructs the displacement field of the structure by using the m-order B-spline wavelet basis function as a weight function. In the end, the paper selects the plane beam structure and the structure with opening hole to carry out numerical analysis of deformation and stress. The Finite Element Method calculation results are compared with the results of the method proposed, and the calculation results of the relative error norm is compared with Gauss weight function as weight function. Therefore, the clarification verified the validity and accuracy of the proposed method.

• 한국해양공학회지
• /
• 제28권1호
• /
• pp.20-27
• /
• 2014

In view of the importance of material reduction and rational structural design due to the rapid increase in oil and steel prices, an optimized structural hybrid design system for the doubler plate of a ship's hull structure was developed. A direct design process by a structural designer was added to this developed optimized system to increase the design efficiency and provide a way of directly inserting a designer's decisions into the design system process. As the first step of the doubler design system development, the design formulas used in doubler design system were introduced. Based on the introduction of influence coefficients $K_{t_c}$ $K_{t_d}$, $K_{b_d}$ and $K_{a_d}$ according to the variations in the doubler length, breadth, doubler thickness, and average corrosion thickness of the main plate, the design formulas for an equivalent plate thickness were developed, and a hybrid design system using these formulas was suggested for the slender doubler plate of a ship structure subjected to a longitudinal in-plane compression load. By using this developed design system, a more rational doubler plate design can be expected considering the efficient reinforcement of the plate members of ship structures. Additionally, a more detailed structural analysis through local strength evaluations will be performed to verify the efficiency of the optimum structural design for the doubler plate.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.565-572
• /
• 2010

It is difficult to predict the accurate fatigue life of the ship structure because of load uncertainty and load redistribution at the ship structure members. As one of studies for accurate evaluation and prediction of fatigue life, it is a promising way to detect the crack previously by attaching the Fatigue Indicator Sensor (FIS) at the crack prediction region. In order to predict the fatigue life of the ship structure by using FIS, it is required to know previously the crack propagation characteristics according to pre-notch shapes. In this study, we obtained the stress distribution phase, stress concentration factors and stress intensity factor of various pre-notch shapes through FEA. Additionally, we conducted the fatigue test and obtained the characteristics of crack propagation according to the pre-notch shapes through comparison between the fatigue test and the FEA. Consequently, we classified the pre-notch shape into 3 categories: Long, Medium, and Short life type. On the basis of the numerical and experimental results, the FIS can be developed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.507-528
• /
• 2014

In the ship and offshore structure design, age-related problems such as corrosion damage, local denting, and fatigue damage are important factors to be considered in building a reliable structure as they have a significant influence on the residual structural capacity. In shipping, corrosion addition methods are widely adopted in structural design to prevent structural capacity degradation. The present study focuses on the historical trend of corrosion addition rules for ship structural design and investigates their effects on the ultimate strength performance such as hull girder and stiffened panel of double hull oil tankers. Three types of rules based on corrosion addition models, namely historic corrosion rules (pre-CSR), Common Structural Rules (CSR), and harmonised Common Structural Rules (CSR-H) are considered and compared with two other corrosion models namely UGS model, suggested by the Union of Greek Shipowners (UGS), and Time-Dependent Corrosion Wastage Model (TDCWM). To identify the general trend in the effects of corrosion damage on the ultimate longitudinal strength performance, the corrosion addition rules are applied to four representative sizes of double hull oil tankers namely Panamax, Aframax, Suezmax, and VLCC. The results are helpful in understanding the trend of corrosion additions for tanker structures.

• Journal of Welding and Joining
• /
• 제26권5호
• /
• pp.29-35
• /
• 2008

In this paper concentrate on the comparison of the thermal and mechanical characteristics in Butt joint of ship structure AH32 steel by using hybrid welding and conventional SAW. For this purpose, fundamental welding phenomena of hybrid process using $CO_2$ Laser and MIG is investigated by the experiments and characteristics of thermal and welding residual stress distribution of welded joint in SAW and hybrid welding are understood from the result of FE numerical simulation and experimental values. From the result of this study, it is understood that Laser-MIG hybrid welding have high potential, make substantial saving of time and manufacturing cost and may proves its self robust in the butt joining of thick AH32 steel ship structural plate in the near future.

• 융합신호처리학회논문지
• /
• 제24권2호
• /
• pp.82-89
• /
• 2023

선박 구조 특성상 격실 구조는 복잡하고 협소하여 작업 과정에서 안전사고가 빈번히 발생하고 있다. 사고의 주된 원인은 구조물 충돌, 낙하물, 독성물질 누출, 화재, 폭발, 질식 등이 존재한다. 사고 발생 시 작업자의 현장 상황을 파악하는 것이 피해를 완화하는 요소 중 하나이다. 이에 안전성을 확보하기 위해 선박 내 CCTV로 현장 상황을 모니터링하고 있으나, 기존의 방식으로는 사고를 예방하기엔 어려움이 있다. 이를 해결하기 위해 안전 기술로 위치 식별, 음성/영상 통신 기능이 탑재되는 스마트 안전모가 개발 중에 있다. 또한, 작업 구역 내 환경 정보 수집 및 저장기능을 포함한 온도, 습도, 진동, 소음, 기울기(자이로 센서), 가스 센서를 사용하여 스마트 안전모를 착용한 작업자에게 위험 상황을 알릴 수 있다. 이를 통해 스마트 안전모 및 환경 센서의 사용으로 선박 내 작업자의 안전성을 강화할 수 있을 것이다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.641-649
• /
• 2021

Fuel oil consumption (FOC) must be minimized to determine the economic route of a ship; hence, the ship power must be predicted prior to route planning. For this purpose, a numerical method using test results of a model has been widely used. However, predicting ship power using this method is challenging owing to the uncertainty of the model test. An onboard test should be conducted to solve this problem; however, it requires considerable resources and time. Therefore, in this study, a deep feed-forward neural network (DFN) is used to predict ship power using deep learning methods that involve data pattern recognition. To use data in the DFN, the input data and a label (output of prediction) should be configured. In this study, the input data are configured using ocean environmental data (wave height, wave period, wave direction, wind speed, wind direction, and sea surface temperature) and the ship's operational data (draft, speed, and heading). The ship power is selected as the label. In addition, various treatments have been used to improve the prediction accuracy. First, ocean environmental data related to wind and waves are preprocessed using values relative to the ship's velocity. Second, the structure of the DFN is changed based on the characteristics of the input data. Third, the prediction accuracy is analyzed using a combination comprising five hyperparameters (number of hidden layers, number of hidden nodes, learning rate, dropout, and gradient optimizer). Finally, k-means clustering is performed to analyze the effect of the sea state and ship operational status by categorizing it into several models. The performances of various prediction models are compared and analyzed using the DFN in this study.