• Journal of Korean Society of Forest Science
• /
• v.38 no.1
• /
• pp.1-12
• /
• 1978

This study has intended to disclose the change of some chemical compositions of Ginkgo seeds which were acquired the treatment of cold-moist-stratification after collection. As check sample, the room-stored seeds were used. With the reasons that when the seeds not stratified were sown the delay of field germination has usually been resulted, the effectiveness of stratificaation in respect to alteration of chemical composition is to be investigated. The increase and decrease of growth promoting and inhibiting substances were investigated by means of chromatography method followed by rice seedling test or wheat coleoptile straight-growth test. The results obtained are summarized as follows; 1. In the untreated seeds, the zone of growth inhibitors on paper chromatograph were observed without regard to the tissue differences, embryo, endosperm and seedcoat. 2. Due to stratification, the amount of inhibitor has decreased in the embryo and seed coat, but growth promoters was decreased as compared with the check materials 3. The indications of results appear that each portion of the embryo, endosperm, and seedcoats of Ginkgo biloba L. contains the growth in hibitor taking part in germination dormancy. 4. It was presumed that hastening germination was influenced by decreasing of inhibitors in the embryo and seed coats rather than by increasing of promoters. 5. Gibberellin was detected at Rf 0.26 under the UV-lamp and the abscisic acid was detected at Rf 0.62, Rf 0.70, and Rf 0.78 and showed purple, gray, blue fluorescence respectively under the UV-lamp.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.239-246
• /
• 2000

In this paper. we propose a semi-automatic segmentation algorithm to extract organ in 3D medical data by using a manually segmentation result in a sing1e slice. Generally region glowing based tracking method consists of 3 steps object projection. seed extraction and boundary decision by region growing. But because the boundary between organs in medical data is vague, improper seeds make the boundary dig into the organ or extend to the false region. In the proposed algorithm seeds are carefully extracted to find suitable boundaries between organs after region growing. And the jagged boundary at low gradient region after region growing is corrected by post-processing using Fourier descriptor. Also two-path tracking make it possible to catch up newly appeared areas. The proposed algorithm provides satisfactory results in segmenting 1 mm distance kidneys from X-rav CT body image set of 82 slices.

• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.189-199
• /
• 2006

This paper presents a field study of the stability of slope collapsed during road construction and proposes a reasonable countermeasure if the current slope is unstable. As a result of slope investigation, it was found that the slope includes five tension cracks and the sliding surface is started from the tension crack and propagated the surface soil layer through weathered rock layer. The slope stability analyses are conducted in case of dry and rainfall seasons. The results indicate that the slope is unstable status. A reinforcement method of slope failure should be selected according to the scale of failure. That is, the scale of slope failure, which is classified small, middle and large size determines the reinforcement method of slope. Since the slope interested in this study is large size failure slope, the reinforcement method to control slope failure is selected stabilizing piles, and seed spray and drainage of surface waterare also selected to remain the factor of safety. The SLOPILE (Ver. 3.0) program is applied in order to do stability analysis of slope reinforced by piles. As the result of analysis, the slope reinforced by a row of piles shows the stable state. It is clearly confirmed that the stabilizing of piles can improve the stability of slope.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.265-272
• /
• 2007

This proposed gamma (${\gamma}$) correction system is developed to reduce the difference between non-linear gamma curve produced by a typical formula and result produced by the proposed algorithm. In order to reduce the difference, the proposed system is using the Least Squares Polynomial which is calculating the best fitting polynomial through a set of points which is sampled. Each system is consisting of continuous several kinds of equations and having their own overlap sections to get more precise. Based on the algorithm verified by MATLAB, the proposed systems are implemented by using Verilog-HDL. This paper will compare the previous algorithm of gamma system such as Existing system with Seed Table with the latest that such as Proposed system. The former and the latter system have 1, 2 clock latency; each 1 result per clock. Because each of the error range (LSB) is $1{\sim}+1,\;0{\sim}+36$, we can how that Proposed system is improved. Under the condition of SAMSUNG STD90 0.35 worst case, each gate count is 2,063, 2,564 gates and each maximum data arrival time is 29.05[ns], 17.52[ns], respectively.

• Korean Journal of Plant Resources
• /
• v.14 no.3
• /
• pp.251-258
• /
• 2001

Predehydration effects for cryopreservation in -196$^{\circ}C$ liquid nitrogen were studied in Korean native Aquilegia buergeriana var. oxysepala Kitamura and A. flabellata var. pumila Kudo seeds. Aquilegia species seeds were adjusted to moisture contents between 3.2 and 9.7% by air dry treatments. Seeds were placed in paper envelopes after submerged in liquid nitrogen and rewarming in 38 $^{\circ}C$ water. Seeds moisture contents by duration of drying were identified as controlling factors in the survival of Aquilegia species seeds for cryopreservation. Aquilegia species seeds having approximate 5% moisture content were able to withstand cooling to -l96$^{\circ}C$. Undehydrated seeds of Aquilegia buergeriana var. oxysepala Kitamura after being cryopreservated in liquid nitrogen have a 10.9% of moisture content and show 52.5% in germination. But, Aquilegia buergeriana var. oxysepala Kitamura seeds dehydrated by drying for 60 min. to have 6.0% of moisture content before cryopreservation show 84.7% in germination test. Properly dehydrated seeds after being stored in liquid nitrogen showed over 60% in germination rate and also shows an uniform sprouting time,11~13 days in average. Any morphologically deformity in germinating beds has not been observed. Results from this study suggest that Aquilegia species seeds can cryopreservation in liquid nitrogen if the seed moisture content is controled by a proper amount of dehydration.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.11
• /
• pp.119-135
• /
• 2022

This paper used dynamic centrifuge tests to examine the seismic response for a deep temporary retaining wall with four input motions of 100, 1,000, and 2,400 years of return periods. The centrifuge model was designed based on an actual deep excavation design with a 50 m maximum excavation depth. The model backfill was prepared with dry silica sand at a relative density of 55%, and the retaining wall was modeled as a 24.8 m height diaphragm wall supported by struts. Acceleration response was amplified at the backfill surface, top of the wall, and near bedrock. However, in the middle of the model, input motion was de-amplified. The member forces of the wall and strut induced by the seismic load, which excited, were compared with the member force at rest condition. The wall's maximum negative and positive moments were increased to 36% and 10% compared to the maximum moment at rest. The maximum axial force increases to 70% of the at rest axial force on the bottom strut. The equivalent static analysis using Mononobe-Okabe (M-O) and Seed-Whitman (S-W) seismic earth pressures were compared to the centrifuge results. Considering the bending moment, the analysis results with the M-O theory underestimates but that with the S-W theory overestimates.

• The Korea Journal of Herbology
• /
• v.28 no.4
• /
• pp.17-23
• /
• 2013

Objectives : The objective of the paper was to study cutting method of Gardeniae frutus, that tends to show symptom of separations in a packing, in accordance with the comparison experiment of quantification and antioxidant effect proceed with the intact Gardeniae fructus(Gf), seed of Gardeniae fructus (Gs) and the pericarp of Gardeniae fructus (Gp) separately. Methods : The Gf, Gs, and Gp were extracted using 80% MeOH, followed by quantizing geniposide contained in each group. A MTT assay was conducted and ROS generation and NO production were measured for comparing its antioxidant effect. Results : As a result of quantizing geniposide contained in the Gf, Gp, and Gs, respectively, the geniposide content was shown to be the highest in the Gs. MTT assay showed that no cytotoxicity was observed in the groups treated with Gf, Gp, and Gs, respectively, at a dose of 500 ${\mu}g/ml$. The ROS generation was shown to have more significantly decreased in the group pretreated with Gf 500 ${\mu}g/ml$ than in the group treated with LPS. The NO level was shown to have more significantly decreased in the group pretreated with Gp 500 ${\mu}g/ml$ than in the group treated with LPS. Conclusion : As the geniposide content and antioxidant effect of Gf varies according to its each part, it is recommended that Gf should be distributed as an intact form other than segregation in packing.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.1
• /
• pp.97-101
• /
• 1988

The objective of this paper was to examine the oxygen requriement of rice seeds when the seeds were germinating under the water. The trial was carried out in the laboratory with the different water temperature (25$^{\circ}C$, 17$^{\circ}C$) in the Crop Experiment Station, Suwon. The tested varieties were 6 in japonica and 6 in indica (I) ${\times}$ japonica (J). In the 25$^{\circ}C$ water temperature rice seeds absorbed more dissolved oxygen (DO) and germinating duration was shorter than in the 17$^{\circ}C$ water temperature. DO uptake of japonica rice seeds was faster than that of indica ${\times}$ japonica rice seeds, and the germinating ratio of japonica rice seeds was higher than that of I${\times}$J rice seeds in the water. DO requirements of germinating rice seeds in the water were average 82.4 ${\mu}$g per seed up to coleoptile appearance and average 123.6 ${\mu}$g per seed up to appearance of radicle in the japonica varieties, but I${\times}$J varieties were 96.9 ${\mu}$g and 145.1 ${\mu}$g respectively. Especially when the rice seeds were germinated in the water, length of coleoptile and radicle of japonica rice were significantly longer than those of I${\times}$J rice varieties.

• Journal of Computational Design and Engineering
• /
• v.1 no.3
• /
• pp.202-212
• /
• 2014

To survive in the current shipbuilding industry, it is of vital importance for shipyards to have the ship components' accuracy evaluated efficiently during most of the manufacturing steps. Evaluating components' accuracy by comparing each component's point cloud data scanned by laser scanners and the ship's design data formatted in CAD cannot be processed efficiently when (1) extract components from point cloud data include irregular obstacles endogenously, or when (2) registration of the two data sets have no clear direction setting. This paper presents reformative point cloud data processing methods to solve these problems. K-d tree construction of the point cloud data fastens a neighbor searching of each point. Region growing method performed on the neighbor points of the seed point extracts the continuous part of the component, while curved surface fitting and B-spline curved line fitting at the edge of the continuous part recognize the neighbor domains of the same component divided by obstacles' shadows. The ICP (Iterative Closest Point) algorithm conducts a registration of the two sets of data after the proper registration's direction is decided by principal component analysis. By experiments conducted at the shipyard, 200 curved shell plates are extracted from the scanned point cloud data, and registrations are conducted between them and the designed CAD data using the proposed methods for an accuracy evaluation. Results show that the methods proposed in this paper support the accuracy evaluation targeted point cloud data processing efficiently in practice.

• International Commerce and Information Review
• /
• v.13 no.3
• /
• pp.249-274
• /
• 2011

This paper examines agri-food export competitiveness among 4 countries(Korea, USA, Japan, China) based on Porter's Diamond model approach. Korea agri-food competitiveness index is much less than those of other countries. Korea is the lowest ranked among the 4 countries in terms of three determinants(except 1 factor, related and supporting industries) of Porter's Diamond Model: Factor condition, demand condition, firm strategy, structure and rivalry. Korea is assumed to have weak point in the factor condition, demand condition because of low capital and land as well as insufficient investment on the agri-food sector. on the other hand, it seems to have strong factor in consumer condition(demand condition). This paper suggest the following strategies to reinforced the agri-food export sector in Korea. 1) an incentive system for seed development and capital investment, 2) a cluster strategy between agriculture and related industry.