• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.1
• /
• pp.19-33
• /
• 2002

A numerical method to efficiently secure necessary design informations of the hydraulic characteristics of rubble mound breakwater was attempted here. The method combines the exterior wave field with the interior wave field which is formulated incorporating porous media flow inside the breakwaters. An approximate method based on the long wave assumption was used for the exterior wave field while a boundary element method was used for the interior wave field. A hydraulic experiment was also performed to verify the validity of the numerical analysis. The numerical results were compared with experimental data and results from existing formulae. They generally agreed in both reflection and transmission coefficients. The calculated pore pressures also showed a similar pattern with experimental data, even if they gave some significant differences in their values fur some cases. The main cause of such differences can be attributed to the strongly nonlinear wave field occurring on the frontal slope of the breakwater. The direct input of dynamic pressures(measured from hydraulic experiment) into the numerical method was suggested as a promising method to enhance the predictability of pore pressures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.781-787
• /
• 2007

Network Mobility (NEMO) basic support protocol doesn't execute the process of route optimization and has not presented the particular security mechanism in other blocks except hi-directional tunnel between Mobile Router (MR) and its Home Agent (HA). Therefore in this paper we process secure route optimization courses through authenticated binding update protocol between MR and its Correspondent Node (CN) and the protocol of the competency of mandate between MR and its Mobile Network Node (MNN); its block also uses an bi-directional tunnel as the block between MR and its HA. The address of each node are generated by the way of Cryptographically Generated Address (CGA) for proving the ownership of address. Finally we analyze the robustness of proposed protocol using security requirements of MIPv6 and existing attacks and the efficiency of this protocol using the connectivity recovery and end-to-end packet transmission delay time.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.749-765
• /
• 2010

There are on-going efforts to utilize guided waves for structural damage detection. Active sensing devices such as lead zirconate titanate (PZT) have been widely used for guided wave generation and sensing. In addition, there has been increasing interest in adopting wireless sensing to structural health monitoring (SHM) applications. One of major challenges in wireless SHM is to secure power necessary to operate the wireless sensors. However, because active sensing devices demand relatively high electric power compared to conventional passive sensors such as accelerometers and strain gauges, existing battery technologies may not be suitable for long-term operation of the active sensing devices. To tackle this problem, a new wireless power transmission paradigm has been developed in this study. The proposed technique wirelessly transmits power necessary for PZT-based guided wave generation using laser and optoelectronic devices. First, a desired waveform is generated and the intensity of the laser source is modulated accordingly using an electro-optic modulator (EOM). Next, the modulated laser is wirelessly transmitted to a photodiode connected to a PZT. Then, the photodiode converts the transmitted light into an electric signal and excites the PZT to generate guided waves on the structure where the PZT is attached to. Finally, the corresponding response from the sensing PZT is measured. The feasibility of the proposed method for wireless guided wave generation has been experimentally demonstrated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1554-1561
• /
• 2018

This paper surveys the DDS, a real - time communication middleware, and proposes ways to improve the DDS secure communication performance. DDS is a communication middleware standard by the OMG. The OMG has released the DDS Security standard to resolve the security issues. The security performance of DDS can be considered into transmission speed and confidentiality. In terms of confidentiality, AES-GCM, currently the encryption algorithm specified by DDS Security, is a very strong encryption algorithm, but there are well known weaknesses associated with authentication. In terms of speed, The computational load for the security function is a restriction to use DDS in systems which requires real-time performance. Therefore, in order to improve the DDS security, algorithms that are faster than AES-GCM and strong in encryption strength are needed. In this paper, we propose a DDS message encryption method applying AES-OCB algorithm to meet these requirements and Compared with the existing DDS, the transmission performance is improved by up to 12%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.2
• /
• pp.239-250
• /
• 2022

LoRa is a physical layer technology designed to secure highly reliable long-range communication with introducing loco parentis tree network and chirp spreading spectrum. Since since a leaf can send message to more than one parents simultaneously with a single transmission in a region, packet delivery ratio increases logarithmically as the number of gateways increases. The delivery ratio, however, dramatically collapses even under loco parentis tree topology due to the limitations of ALOHA-like primitive MAC, . The proposed method is intended to exploit SDMA approach to reuse frequency in an area. With the view, TxPower of each sender for each message in a concurrent transmission is elaborately controlled to survive the collision at different gateway. Thus, the gain from the capture effect improves the capacity of resource-hungry Low Power and Wide Area Networks.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.7
• /
• pp.67-75
• /
• 2023

In this paper, we analyze the problem of the user authentication scheme that provides dynamic ID in a multi-server environment proposed by Andola et al. and propose an improved authentication one to solve this problem. As a result of analyzing the authentication scheme of Andrea et al. in this paper, it is not safe for smart card loss attack, and this attack allows users to guess passwords, and eventually, the attacker was able to generate session key. This paper proposed an improved authentication scheme to solve these problems, and as a result of safety analysis, it was safe from various attacks such as smart card loss attack, password guess attack, and user impersonation attack. Also the improved authentication scheme not only provides a secure dynamic ID, but is also effective in terms of the computational complexity of the hash function. In addition, the improved authentication scheme does not significantly increase the amount of transmission, so it can be said to be an efficient authentication scheme in terms of transmission cost.

• Convergence Security Journal
• /
• v.24 no.3
• /
• pp.95-104
• /
• 2024

The performance capability of the future battlefield depends on whether the next-generation technology of the Fourth Industrial Revolution, called ABCMS (AI, Bigdata, Cloud, Mobile, Security), can be applied to secure innovative defense capabilities It is no exaggeration to say. In addition, the future military operation environment is rapidly changing into a net work-oriented war (NCW) in which all weapon systems mutually share battlefield information and operate in real-time within a single integrated information and communication network based on the network and is expanding to the scope of operation of the manned and unmanned complex combat system. In particular, communication networks responsible for high-speed and hyperconnectivity require high viability and efficiency in power operation based on multi-tier (defense mobile, satellite, M/W, wired) networks for the connection of multiple combat elements and smooth distribution of information. From this point of view, this study is different from conventional single-media, single-path transmission with fixed specifications, It is an artificial intelligence-based transmission technology using RNN (Recurrent Neural Networks) algorithm and load distribution during traffic congestion using available communication wired and wireless infrastructure multimedia simultaneously and It is the development of MMMP-Multi-Media Multi-Path adaptive network technology.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.5
• /
• pp.901-909
• /
• 2021

Since mobile devices have limited computational resources, it tends to use the cloud to compute or store data. As real-time becomes more important due to 5G, many studies have been conducted on edge clouds that computes at locations closer to users than central clouds. The farther the user's physical distance from the edge cloud connected to base station is, the slower the network transmits. So applications should be migrated and re-run to nearby edge cloud for smooth service use. We run applications in docker containers, which is independent of the host operating system and has a relatively light images size compared to the virtual machine. Existing migration studies have been experimented by using network simulators. It uses fixed values, so it is different from the results in the real-world environment. In addition, the method of migrating images through shared storage was used, which poses a risk of packet content exposure. In this paper, Containers are migrated with Secure CoPy(SCP) method, a data encryption transmission, by establishing an edge computing environment in a real-world environment. It compares migration time with Network File System, one of the shared storage methods, and analyzes network packets to verify safety.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2011

Power Line Communication (PLC) is a system for carrying data on a conductor used for electric power transmission. Recently, PLC has received much attention due to connection efficiency and possibility of extension. It can be used for not only alternative communication, in which communication line is not sufficient, but also for communication between home appliances. Korea Electronic Power Cooperation (KEPCO) is constructing the system, which automatically collects values of power consumption of every household. Due to the randomness and complicated physical characteristics of PLC protocol (KS X4600-1), it has been believed that the current PLC is secure in the sense that it is hard that an attacker guesses or modifies the value of power consumption. However, we show that the randomness of the protocol is closely related to state of the communication line and thus anyone can easily guess the randomness by checking the state of the communication line. In order to analyze the security of PLC, we study the protocol in detail and show some vulnerability. In addition, we suggest that PLC needs more secure protocol on higher layers. We expect that the study of PLC help in designing more secure protocol as well.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.925-928
• /
• 2008

With basis of the development of information communication techniques in recent year, the digital processing techniquy also has been growed fast. The digital processing technique have used signals - speech and image processing- for processing of transmission and analysis. After we get and save the signals. Effective signal processing techniques have varied filters and typical digital filters are FIR filter and IIR filter. The FIR digital filter is more secure because phase response characteristics have linear phase. But, FIR digital filters have a problem to product the Gibbs phenomenon generating around a discontinuous point. A propose of filer is to remove the problem. Therefore, in this paper I was proposed a method using FIR digital filter applied a modified window function and the method was compared with conventional methods.