• 항공우주기술
• /
• 제4권2호
• /
• pp.65-70
• /
• 2005

짧은 국내 우주개발의 역사 속에서도 현재 다목적실용위성 개발사업을 성공적으로 수행하고 있으나 대부분의 핵심부품들에 대해서는 국산화 개발을 시도조차 하지 못하고 있는 실정이다. 중장기 국가우주개발 계획에 따라 향후 우주선진국으로의 진입을 위해서는 핵심부품 국산화 개발은 필수적으로 이루어져야하므로 한국항공우주연구원 다목적위성사업단에서는 (주)한화와 더불어 상대적으로 국산화 접근의 가능성이 높은 추진제/가압제 공급용 Fill/Drain 밸브의 개발을 수행하였다. 본 논문에서는 설계, 제작 및 시험에 걸쳐 Fill/Drain 밸브 개발의 전 과정을 요약하였고, 이 과정을 통해 총 4세트의 개발모델을 국산화 하는데 성공하였으며 인수 시험을 통해 성능 요구조건을 충분히 만족함을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.949-952
• /
• 2005

According to the national space program in Korea, is satellites will be launch into space up to 2015. Especially, KARI is going to develope of its own a high resolution camera of less than 1m to be mounted on next Multipurpose Satellite. When performing testing of large spacecraft or hardware that will be launched into orbit, it is necessary to conduct a testing with space-simulated environment. To achieve this requirement, thermal vacuum chamber is generally used. KARI has been developed a very Large Thermal Vacuum Chamber(LTVC) from 2003 to accomodate future space program, such as KOMPSAT, COMS, and Launch vehicles. This new facility will be used to qualify the first self developed High Resolution Camera, which will be loaded on KOMPSAT-3. To perform an optical test for space camera, it is necessary to provide vibration free environment. Thus the vibration responses on the optical table due to external vibration should be minimized by using a special isolation system. In this paper, we propose the concept design of vibration isolation system for the development of the high resolution camera.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.291-295
• /
• 2002

O-ring seal is usual component part in various mechanical apparatus for sealing that makes efficient performance of the equipments. The sealing performance of O-ring is affected in environments of the O-rings, like that applied pressure, working temperature, pre-compressed ratio and materials. In this paper, a pressurized, compressed elastomeric bi-polymer O-ring inserted into a rectangular groove is analyzed numerically using the MARC finite element program. The calculated FEM results showed that bi-polymer O-ring that is manufactured by NBR for an inner and FFKM for an outer ring shows a low temperature distribution among various bi-polymer O-ring models. But, the normal contact stress between the flange and upper part of the O-ring is small compared to other bi-polymer model.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.205-212
• /
• 2003

This paper may provide a basic design data for the safer car seat mechanism and the quality of the material used by finding out the passenger's dynamic behavior when protected by seat belt during collision. A computer simulation with finite element method is used to accomplish this objective. At first, a detailed geometric model of the seat is constructed using CAD program. The formation of a finite element from a geometric data of the seat is carried out using Hyper-Mesh that is the commercial software for mesh generation and post processing. In addition to seat modeling, the finite element model of seat belt and dummy is formed using the same software. Rear impact analysis is accomplished using Pam-Crash with crash pulse. The part of the recliner and right frame is under big stress in rear crash analysis because the acceleration force is exerted on the back of the seat by dummy. The stress condition of the part of the bracket is checked as well because it is considered as an important variable on the seat design. Front impact model which including dummy and seal belt is analyzed. A Part of anchor buckle of seat frame has high stress distribution because of retraction force due to forward motion of dummy at the moment of collision. On the basis of the analysis result, remodeling and reanalysis works had been repeatedly done until a satisfactory result is obtained.

• Tribology and Lubricants
• /
• 제25권2호
• /
• pp.120-124
• /
• 2009

In automobile chassis system, several environmental factors weaken durability of automobile's components. The environmental factors are temperature, humidity, intensity of radiation and dust particle inflow. Especially, dust particle inflow leads to increase in friction and wear of automobile's components. The wear of automobile's component leads to increase in noise and exerts a bad influence on life of components. In this study, dust particles were investigated for study on the influence of dust particle inflow. Dust particles are collected on urban area, rural area and highway in China. The size of dust particle is analyzed using the image plus program, and the element of dust particle is analyzed using the SEM and EDX. The elements of dust particle are $SiO_2$ and $Al_{2}O_{3}$. The other elements(Na, Ca, Cl etc..) are detected on urban area and highway.

• Tribology and Lubricants
• /
• 제21권4호
• /
• pp.171-176
• /
• 2005

O-ring seal is an essential component in various mechanical apparatuses for a sealing of oil container and pressure vessels. This paper presents the sealing pressure and compressive contact behaviors of hi-polymer O-rings, which is made by an outer shell of FFKM material and an inner solid ring of FKM one. The contact normal pressure and its ratios are measured by experimental method with an automatic control system of the working temperature and analyzed numerically by using the non-linear Marc FEM program. The results show reasonably good agreements between the computed FEM results and measured ones when the operating temperature is kom normal temperature of $18^{\circ}C$ and a high temperature of $300^{\circ}C$ But the compared values between the computed and tested results show a little difference because of the increased temperature, which is related to the non-linear parameter of the O-ring material. Bi-polymer 0-ring shows a good contact normal stress and compression behavior for a given operation temperature and compression ratio.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1500-1505
• /
• 2008

본 논문은 원자력 내진등급 IIA 글로브 밸브의 지진하중에 대한 구조 건전성을 평가하였다. 밸브 구조물을 3차원 모델링하여 유한요소법을 사용하여 모달 해석 및 등가 정적 응력해석을 수행하였다. 모달 해석 결과 밸브 구조물은 충분히 강건하여 등가 정적해석이 가능하였고 해석에서 구한 응력들을 조합하여 원자력 규격집에서 제시한 허용응력과 비교하여 밸브의 구조 건전성을 판단하였다. 모든 지진하중에 대한 밸의 구조물에서의 응력은 허용값 보다 작게 분포하므로 구조적 건전성을 유지한다고 평가할 수 있다.

• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1034-1039
• /
• 2006

본 논문은 내진등급 IIA 글로브 밸브의 지진하중에 대한 구조 건전성을 평가하였다. 밸브 구조물을 3차원 모델링하여 유한요소법을 사용하여 모달 해석 및 등가 정적 응력해석을 수행하였다. 모달 해석 결과 구조물은 충분히 강건하므로 지진 가속도 값을 사용한 등가 정적 응력해석이 가능하였다. 정적 응력 해석에서 구한 응력을 조합하여 원자력 규격집에 근거한 허용기준에 따라 밸브의 구조 건전성을 평가하였다. 지진하중에서 발생한 응력값이 허용값 아래에 분포하므로 글로브 밸브 구조물은 구조적 건전성을 유지할 수 있다고 평가할 수 있다.

• 한국융합학회논문지
• /
• 제8권11호
• /
• pp.93-101
• /
• 2017

본 연구의 목적은 기업체의 임직원이나 협력사 직원들이 스마트폰 카메라를 이용해 기업의 제품 도면이나 기밀유지가 보장되어야 하는 제품 개발 시 진행되었던 업무 내용이 저장된 문서 등을 스마트폰 카메라로 촬영하여 외부로 유출하는 것을 사전에 차단하고자 한다. 본 연구에서는 허가된 사용자에 대한 사진 촬영과 기업체 내부에서만 촬영된 데이터를 공유할 수 있게 하는 인원 출입 권한과 연계한 스마트폰 카메라 제어시스템을 제안한다. 이를 위해 기업체에 상주하는 임직원, 협력사 직원들과 방문객들의 스마트폰 제어 프로그램(MCS : Mobile Camera Control System) 대한 설치현황을 개발하여 출입이 허가된 지역에서 설치된 스마트폰 제어 프로그램 작동여부를 실험 및 분석한다. 또한, 방문객들이 기업체 방문 시 스마트폰 카메라를 통한 사진 촬영의 방지효과와 스마트폰 카메라 렌즈부분에 부착하는 봉인 스티커 비용의 절감효과가 나타났다.

• Journal of Periodontal and Implant Science
• /
• 제47권2호
• /
• pp.116-131
• /
• 2017

Purpose: The entry of bacteria or harmful substances through the epithelial seal of human gingival keratinocytes (HGKs) in the junctional epithelium (JE) is blocked by specialized intercellular junctions such as E-cadherin junctions (ECJs). However, the influence of roughened substrates, which may occur due to apical migration of the JE, root planing, or peri-implantitis, on the development of the ECJs of HGKs remains largely unknown. Methods: HGKs were cultured on substrates with varying levels of roughness, which were prepared by rubbing hydrophobic polystyrene dishes with silicon carbide papers. The activity of c-Jun N-terminal kinase (JNK) was inhibited with SP600125 or by transfection with JNK short hairpin RNA. The development of intercellular junctions was analyzed using scanning electron microscopy or confocal laser scanning microscopy after immunohistochemical staining of the cells for E-cadherin. The expression level of phospho-JNK was assessed by immunoblotting. Results: HGKs developed tight intercellular junctions devoid of wide intercellular gaps on smooth substrates and on rough substrates with low-nanometer dimensions (average roughness $[Ra]=121.3{\pm}13.4nm$), although the ECJs of HGKs on rough substrates with low-nanometer dimensions developed later than those of HGKs on smooth substrates. In contrast, HGKs developed short intercellular junctions with wide intercellular gaps on rough substrates with mid- or high-nanometer dimensions ($Ra=505.3{\pm}115.3nm$, $867.0{\pm}168.6nm$). Notably, the stability of the ECJs was low on the rough substrates, as demonstrated by the rapid destruction of the cell junction following calcium depletion. Inhibition of JNK activity promoted ECJ development in HGKs. JNK was closely associated with cortical actin in the regulation of ECJs in HGKs. Conclusions: These results indicate that on rough substrates with nanometer dimensions, the ECJs of HGKs develop slowly or defectively, and that this effect can be reversed by inhibiting JNK.