• Transactions on Electrical and Electronic Materials
• /
• 제12권4호
• /
• pp.135-139
• /
• 2011

In an effort to develop new electrical insulation materials, four different kinds of organically modified layered silicate were incorporated into an epoxy matrix to prepare nanocomposites for electrical insulation. Five wt% of organically modified layered silicates were processed in a planetary centrifugal mixer in an epoxy matrix, and the thermal, mechanical, and electrical properties of the cured epoxy/layered silicate were investigated. The morphology of the nanoscale silicate dispersed in the epoxy matrix was observed using transmission electron microscopy, and the interlayer distance was measured by wide-angle X-ray scattering diffraction analysis.

• 한국해안·해양공학회논문집
• /
• 제22권3호
• /
• pp.163-170
• /
• 2010

평면파 근사식에 기초한 지형에 의한 파랑변형 모형인 산란체법과 변환행렬법을 비교하여 특성을 분석하였다. 산란체법의 결과가 기존 엄밀해에 보다 근접하고 내재한 물리현상을 보다 명확히 설명하는 것으로 평가된다. 이들은 해석해로 계산이 빠르고 용이하며 지형이 비교적 단순한 경우에는 상당한 정밀도를 보인다.

• 한국정보전자통신기술학회논문지
• /
• 제11권3호
• /
• pp.313-318
• /
• 2018

전자빔과 상호작용하는 공동공진기를 위한 동축형 대역억제필터를 설계하고 제작하였다. 제안한 필터는 공동공진기의 기본모드에 대해 4분의 1 파장 길이의 초크를 가진다. 동축형 대역억제필터의 등가회로를 제시하고 각 부분의 ABCD 파라미터를 구하여 필터 전체의 ABCD 행렬을 구했다. ABCD 행렬로부터 산란행렬을 구하여 MATLAB으로 필터를 시뮬레이션하였다. 동축형 대역억제필터 구조를 HFSS를 이용하여 시뮬레이션을 수행하여 등가회로로 시뮬레이션이 유용함을 확인하였다. 설계한 동축형 대역억제필터는 6-1/8 플랜지를 가지는 필터를 제작하였다. 제작한 필터는 6-1/8 플랜지에서 N 형 플랜지로 변환하는 변환기를 사용하여 측정하였다. 제작된 필터의 삽입손실은 공동공진기의 기본모드에서 25 dB 이상이고 1차 고차모드에서 0.25 dB 보다 작다. 측정측정 결과는 시뮬레이션한 결과와 잘 일치하며 설계 규격을 만족한다.

• 한국전자파학회논문지
• /
• 제16권10호
• /
• pp.982-988
• /
• 2005

본 논문에서는 모드 변환기나 필터, 매칭 구조가 모두 연결되어 있는 개구면 안테나의 특성을 예측을 위해 급전 부분에 전이 구조가 붙어 있는 원형 개구면 안테나의 해석적인 산란 해를 제시한다. 개구면의 모양이 원형이기 때문에 길이가 짧고 반지름이 다른 원형 도파관이 연결되어 있는 구조로 모델링하여 안테나를 해석했다. 안테나의 해석에서 급전 도파관과 개구면 사이의 영역은 일반화된 산란 행렬을 이용하여 전기장과 자기장을 나타냈고, 개구면에서 복사되는 전기장과 자기장은 적분 변환을 이용하여 나타내어 전체 구조를 해석했다. 여기서 필요한 산란 행렬과 적분 변환은 모두 해석적으로 계산 가능하고, 엄밀한 해이므로 안테나의 반사 특성, 복사 특성 등을 정확하게 예측 가능하다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2003년도 추계종합학술대회 논문집
• /
• pp.249-252
• /
• 2003

평행도파관 H평면 T접합에 대한 전자파 산란해를 이론적으로 구한다. 반복법과 그린함수 관계식을 이용하여 $E_{z}$ 에 대한 반복 방정식을 얻는다. 이 반복방정식은 행렬로 표현될 수 있다. 반사 전력과 투과전력에 대한 산란특성을 제시하고 다른 결과들과 비교한다.다.

• 한국인쇄학회지
• /
• 제13권2호
• /
• pp.19-32
• /
• 1995

Liquid crystal-polymer composite(LCPC) films are promising new materials for both projection displays and vision products. LCPC films consist of a continuous liquid crystal phase embedded in a three- dimensional network of polymer matrix. The liquid crystal in these LC phases can be electrically switched giving rise to an opaque scattering off-state and a transparent, non- scattering on-state. In this work, a premixture is composed of LC, UV-curable monomer and photonitiator. LCPC films are formed by photopolymerization induced phase separation from this premixture. In conclusion, structure and electro-optical properties of LCPC films strongly depends on the selection of monomer, LC content and curing rate.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1817-1819
• /
• 2001

For an efficient calculation of scattering matrix of planar transmission line with step discontinuity. Mode Matching Method combined with Vector Finite Element Method is adopted. Calculating effective widths are replaced with their respective equivalent planar waveguide corresponding to the microstrip width, Propagation Constant is calculated from the Vector finite element. Mode matching method is used for deriving scattering parameters.

• 한국진공학회지
• /
• 제12권S1호
• /
• pp.100-103
• /
• 2003

The magnetoresistance (MR) of $La_{1-\chi}S_{\chi}CoO_{3-\delta}$ films prepared by pulsed-laser deposition were investigated in order to clarify the magnetotransport properties around the metal-insulator transition. For the films in the metallic state ($\chi$ > 0.25), the MR(T) manifests a small peak at the Curie temperature due to the spin-disorder scattering. The transition of the film into the insulating state ($\chi\;\leq$ 0.25) is accompanied by an essential growth of the MR and results in a significant increase in the MR(T) with decreasing temperature, due to a phase separation into the ferromagnetic-metal clusters and the insulating matrix.

• 한국재료학회지
• /
• 제31권11호
• /
• pp.626-634
• /
• 2021

Cu matrix composites reinforced with chopped carbon fiber (CF), which is cost effective and can be well dispersed, are fabricated using electroless plating and hot pressing, and the effects of content and alignment of CF on the thermal properties of CF/Cu composites are studied. Thermal conductivity of CF/Cu composite increases with CF content in the in-plane direction, but it decreases above 10% CF; this is due to reduction of thermal diffusivity related with phonon scattering by agglomeration of CF. The coefficient of thermal expansion decreases in the in-plane direction and increases in the through-plane direction as the CF content increases. This is because the coefficient of thermal expansion of the long axis of CF is smaller than that of the Cu matrix, and the coefficient of thermal expansion of its short axis is larger than that of the Cu matrix. The thermal conductivity is greatly influenced by the agglomeration of CF in the CF/Cu composite, whereas the coefficient of thermal expansion is more influenced by the alignment of CF than the aggregation of CF.

• 대기
• /
• 제31권1호
• /
• pp.113-141
• /
• 2021

The impacts of ice clouds on the energy budget of the Earth and their representation in climate models have been identified as important and unsolved problems. Ice clouds consist almost exclusively of non-spherical ice crystals with various shapes and sizes. To determine the influences of ice clouds on solar and infrared radiation as required for remote sensing retrievals and numerical models, knowledge of scattering and microphysical properties of ice crystals is required. A conventional method for representing the radiative properties of ice clouds in satellite retrieval algorithms and numerical models is to combine measured microphysical properties of ice crystals from field campaigns and pre-calculated single-scattering libraries of different shapes and sizes of ice crystals, which depend heavily on microphysical and scattering properties of ice crystals. However, large discrepancies between theoretical calculations and observations of the radiative properties of ice clouds have been reported. Electron microscopy images of ice crystals grown in laboratories and captured by balloons show varying degrees of complex morphologies in sub-micron (e.g., surface roughness) and super-micron (e.g., inhomogeneous internal and external structures) scales that may cause these discrepancies. In this study, the current idealized models representing morphologies of ice crystals and the corresponding numerical methods (e.g., geometric optics, discrete dipole approximation, T-matrix, etc.) to calculate the single-scattering properties of ice crystals are reviewed. Current problems and difficulties in the calculations of the single-scattering properties of atmospheric ice crystals are addressed in terms of cloud microphysics. Future directions to develop physically consistent ice-crystal models are also discussed.