• Steel and Composite Structures
• /
• v.2 no.6
• /
• pp.429-440
• /
• 2002

A finite strip method is developed for fatigue reliability analysis of steel highway bridges. Flat shell strips are employed to model concrete slab and steel girders, while a connection strip is formed using penalty function method to take into account eccentricity of girder top flange. At each sampling point with given slab thickness and modulus ratio, a finite strip analysis of the bridge under fatigue truck is performed to calculate stress ranges at fatigue-prone detail, and fatigue failure probability is evaluated following the AASHTO approach or the LEFM approach. After the failure probability is integrated over all sampling points, fatigue reliability of the bridge is determined.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.1
• /
• pp.15-21
• /
• 1998

Several adaptive and direct slicing methods have been developed to make the slice data for RP parts with better accuracy and speed. This research deals with a new adaptive slicing algorithm that shows drastic improvement in computing time for calculating the slices of a part. First, it uses less number of sampling points fur each slice in determining the thickness of the next slice. Secondly, the idea of contour map is utilized to determine the optimal sampling point on each slice. Thirdly, the calculation efficiency is further improved by introducing vertical character lines of the given part. The results in terms of accuracy and speed are compared with the existing methods.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.1
• /
• pp.24-32
• /
• 2010

This paper introduces a B-spline based branch & bound algorithm for global optimization. The branch & bound is a well-known algorithm paradigm for global optimization, of which key components are the subdivision scheme and the bound calculation scheme. For this, we consider the B-spline hypervolume to approximate an objective function defined in a design space. This model enables us to subdivide the design space, and to compute the upper & lower bound of each subspace where the bound calculation is based on the LHS sampling points. We also describe a search tree to represent the searching process for optimal solution, and explain iteration steps and some conditions necessary to carry out the algorithm. Finally, the performance of the proposed algorithm is examined on some test problems which would cover most difficulties faced in global optimization area. It shows that the proposed algorithm is complete algorithm not using heuristics, provides an approximate global solution within prescribed tolerances, and has the good possibility for large scale NP-hard optimization.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.1
• /
• pp.33-42
• /
• 2010

In this study, new medial surface calculation methods using Voronoi diagrams are investigated for the point samples extracted on closed surface models. The medial surface is defined by the closure of all points having more than one closest point on the shape boundary. It is a one of essential geometric information in 3D and can be used in many areas such as 3D shape analysis, dimension reduction, freeform shape deformation, image processing, computer vision, FEM analysis, etc. In industrial parts, the idealized solid parts and shell shapes including sharp edges and vertices are frequently used. Other medial surface extraction methods using Voronoi diagram have inherent separation and branch problems, so that they are not appropriate to the sharp edged objects and have difficulties to be applied to industrial parts. In addition, the branched surfaces on sharp edges in shell shapes should be eliminated to obtain representative medial shapes. In order to avoid separation and branch problems, the new approach by analyzing the shapes and specially sampling on surfaces has been developed.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1544-1550
• /
• 2014

In this paper, an adaptive optimization strategy utilizing Kriging model and genetic algorithm is proposed for the optimal design of electromagnetic devices. The ordinary Kriging assisted by the spherical covariance model is used to construct surrogate models. In order to improve the computational efficiency, the adaptive uniform sampling strategy is applied to generate sampling points in design space. Through several iterations and gradual refinement process, the global optimal point can be found by genetic algorithm. The proposed algorithm is validated by application to the optimal design of a switched reluctance motor, where the stator pole face and shape of pole shoe attached to the lateral face of the rotor pole are optimized to reduce the torque ripple.

• The Korean Journal of Applied Statistics
• /
• v.25 no.6
• /
• pp.999-1008
• /
• 2012

A Bayesian multiple change-point model for small data is proposed for multivariate means and is an extension of the univariate case of Cheon and Yu (2012). The proposed model requires data from a multivariate noncentral $t$-distribution and conjugate priors for the distributional parameters. We apply the Metropolis-Hastings-within-Gibbs Sampling algorithm to the proposed model to detecte multiple change-points. The performance of our proposed algorithm has been investigated on simulated and real dataset, Hanwoo fat content bivariate data.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.36-41
• /
• 1996

Turbulent thermal mixing experiments by the injection of two parallel non-isothermal water jets have been performed. The turbulent velocities and fluctuations under the isothermal conditions have been measured using LDV system. The velocity vectors have been plotted in two dimensions from the data measured at 29$\times$16 points. The thermal mixing experiments also have been conducted, where we used 45 K-type thermocouples with a sheath diameter of 0.020" which were fixed with 5 mm distance in a line at a measured height. The measured heights were 5, 10, 20, 30, 40 cm from the upper end of rectangular nozzles. We measured the turbulent temperatures under the various flow velocity conditions with 12$^{\circ}C$ $\leq$ $\Delta$T $\leq$4$0^{\circ}C$. The sampling frequency and sampling time were about 420 Hz and 10 seconds, respectively. The measured results of equal velocity parallel jets were analyzed axially and radially to obtain the variation of temperature fluctuation.tion.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.4
• /
• pp.16-24
• /
• 2007

An investigation on the polluted sediments in the Lake Sihwa and the benthos that inhabited on the sediments was conducted. Cost effective remediation alternatives were derived form the results of the investigation. The sediment samples taken from four sampling points out of thirteen showed relatively high heavy metal (particularly copper) concentrations which exceeded the Effects Range Low (ERL) of the National Oceanic and Atmospheric Administration, USA. The four sampling points were located in front of industrial complexes. Although the heavy metals appeared to have affected the growth of the benthos, the concentration of it did not exceed the criteria of dredging that were developed by Netherlands or the State of Washington, USA. However, contamination by organic matters and sulfur compounds was severe, which exceeded the criteria of dredging that were established in Japan. The sediments taken from the four sampling points which were contaminated with heavy metals showed higher organic matter content in general. The organic matters in the sediments depleted oxygen in summer, which appeared to be fatal to the benthos. A comprehensive analysis on the sediments, benthos, and other environmental impact from the contaminated sediments drew a conclusion that the benthonic environment of the Lake Sihwa needed a stepwise remediation, giving a particular emphasis on the clean up of the sediments upstram of the Lake which could cause odor problems to the nearby residential area.

• Journal of the Korean earth science society
• /
• v.38 no.7
• /
• pp.481-495
• /
• 2017

The purpose of this study is to investigate and analyze the relationship between meteorologicalclimatic factors and fruit property data from Aronia sampling points during May to August 2016 in the Danyang area. For this purpose, we investigated the meteorological factor, the physicalchemical property of fruit and soil, and the property change of fruit according to the setting of rain and daylight shielding from Aronia sampling points. The result indicate that first, meteorologicalclimatic factors such as the maximum air temperature, the accumulated precipitation, the relative humidity, and daylight hours are a positive influence on products and maintenance of quality of Aronia as well as a suitable field for cultivating Aronia in the Danyang. However, a strong wind in April and May deeply affects the falling phenomenon of the flowering and blooming season. Second, the quality and products of Aronia show the high correlation coefficients of more than 0.9 with agricultural meteorologicalclimatic factors such as daily maximum temperature, daily soil temp, daily soil pH, cumulated precipitation, and daily soil humidity. Also, they can be predicted by the regression equations using these factors. Third, it is necessary to maintain the rain shielding in these fields because antocyanin and saccharinity components within Aronia decreased in case of heavy rainfalls. And, the result of regression analysis saccharinity and antocyanin within aronia from normal fields and rain shieldingfields at Aronia sampling points show a high correlation, respectively.

• Journal of Korean Society of Forest Science
• /
• v.30 no.1
• /
• pp.1-7
• /
• 1976

This study was performed in Bo-Eun Gun, Chung-Cheong Buk Do. The forest types having been classified, the each area was measured by dot-grid method. The 820 sample points having been obtained by systematic sampling method, the tree heights, crown densities, crown diameters in the points were measured on the aerial photography, and the volumes per hectare were estimated by the comparison with stereogram. Thirty eight plots, which amounted to about 4.5% of all the sample points, were sampled with double sampling method and volume were measured by the ground survey method. the results were summarized as follows; 1. There is no significant differentia between the values measure by dot-grid method and the statistical values obtained by the authority for the area. 2. There is no significant differentia between the estimated values and the measured values for the volume. And the coefficient (b) was 1.18. 3. The heights of conifer trees were easily measured more or less, but it was some difficult for the deciduous trees, because the tops of trees were not observed easily. 4. All the values had a tendencies to be overestimated in the low stocked stand and to be underestimated in the high stocked stand. 5. When the aerial volume table method by ground checking needs to be used together, the work should be performed by the experienced technician and the photgraphic volume table should be made in advanced of the work.