• Journal of the Korea Safety Management & Science
• /
• v.20 no.3
• /
• pp.1-9
• /
• 2018

This study is intended to look into the effect of construction safety supervision system on risk control and reduction. To achieve this, a survey was carried out to 114 companies in construction, ordering, contract and management. The overall findings were as follows. The effect of construction safety supervision system on risk control and reduction showed that factors of supervision system, supervision cost and supervision method had a positive effect on risk control and reduction. And their perception of the introduction of safety supervision system in construction sites according to process showed that there was a difference between them according to the field of ordering, contract and supervision. There was the biggest difference between owner and contractor in double supervision system, but no difference between them in the perception of risk reduction. These results show that all ordering, contract and supervision are positively needed for the introduction of construction safety supervision. This means that there is a difference between owner and contractor in the perception of process according to system operation. All companies agree to system improvement by the settlement of safety supervision system for the prevention of safety accidents and safe construction, but the systematic complement of safety supervision is the burden of contractor. And there is a big difference between owner and contractor in the perception of responsibility and concern for cost burden.

• International Journal of Safety
• /
• v.5 no.1
• /
• pp.24-28
• /
• 2006

This study focuses on the issue of improving safety management of elevators. The role of certification and supervision in reducing the associated accidents is specifically addressed. The results of simple statistical analysis suggests that a certification procedure emphasizing the quality assurance during manufacturing and supervision during assembly and installation of elevators are needed and can be effective in minimizing the associated accidents.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.4
• /
• pp.523-531
• /
• 2022

The International Atomic Energy Agency (IAEA) entails independent decision-making for the safety supervision of civil nuclear facilities. To evaluate and review the safety of nuclear facilities, the national regulatory body usually consults independent institutions or external committees. Technical Support Organizations (TSOs) include national laboratories, research institutions, and consulting organizations. Support from professional organizations in other countries may also be required occasionally. Most of the world's major nuclear power countries adopt an independent nuclear safety supervision model. Accordingly, China has continuously improved upon the construction of such a system by establishing the National Nuclear Safety Administration (NNSA) as the decision-making department for nuclear and radiation safety supervision, six regional safety supervision stations, the Nuclear and Radiation Safety Center (NSC), a nuclear safety expert committee, and the National Nuclear and Radiation Safety Supervision Technology R&D Base, which serves as the test, verification, and R&D platform for providing consultation and technical support. An R&D system, however, remains to be formed. Future endeavors must focus on improving the technical support capacity of these systems. As an enhancement from institutional independence to capability independence is necessary for ensuring the independence of China's nuclear safety regulatory institution, its regulatory capacity must be improved in the future.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.31-39
• /
• 2011

In this study, supervision resides fire mission against problems associated with case studies and surveys done through the side of the field work, technical personnel, fire management, including fire code aspects classified into three kinds of items dealt with the issue. Started at the scene of the problem in terms of performance, the issue of the construction process, mainly dealt with the issue at the time of completion. Fire management side, supervisor of technical personnel, human resources management issues, contract issues, fire code level, the frequent revisions of fire regulations, supervision, processing delays of the resulting report, the problem resides with the expansion of Fire Supervision target was mentioned. Finally, the target for each hierarchical supervision, and resident supervisor of the need for supervision of work performance test was carried out by the correlation.

• Architectural research
• /
• v.25 no.1
• /
• pp.11-17
• /
• 2023

This study aims to derive key construction supervision work that can be digitalized among construction supervision work. The scope of the study includes domestic construction sites to which the Building Act of South Korea is applied. First, the construction supervision process was identified through extensive consultation of construction expert witnesses. Afterwards, the key construction supervision works for digitization were derived through survey results construction expert witnesses. Among the 24 supervision works throughout the pre-construction, construction, and post-construction stages, the proportion of supervision work manpower or cost, the type of data generated by supervision work and the urgency of introducing digital technology, and the impact on productivity and safety of supervision work were evaluated on a 5-point scale from "very low" to "very high" was investigated. The survey was conducted by t-test analysis, and as a result, it was possible to derive that the level of digitization was higher than average in "quality management," "safety management," and "collection and cooperation of maintenance instructions." It can be interpreted that digitization has been introduced on a pilot testing basis or has already been completed according to the needs of the site. On the other hand, it can be interpreted that the work that are obtained below the average score are considered to be realistically constrained at the construction site and that it is inevitable for the supervisor to proceed manually. Future studies include analyzing the quantitative impact of the key construction supervision work once digitalization is fully applied.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.82-92
• /
• 2009

This study analyzed the present operation state and cases of safety accidents of inflammables and explosives in army camps by focusing on staffs in charge for safety supervision of inflammables and explosives in army camps. Moreover, through this analysis, the study surveyed the actual safety supervision conditions in a workplace related to the hazardous materials, the safety plan for inflammables and explosives, the quality of education for safety supervision, the consciousness of safety supervisors for the safety supervision of inflammables and explosives, and so on. On basis of this research, the actual conditions of inflammables and explosives in army camps were investigated. By not only establishing the systematic safety plan but also developing the safety supervision education programs to manage inflammables and explosives in army camps safely, this study tries to arouse military officers' interest and ensure a safe workplace. Furthermore, this study presents public relations and revitalization of the education to make safety supervisors for inflammables and explosives and the interested parties recognize the hazards of safety accidents, by cutting them off from safety accidents in advance.

• Journal of the Korea Construction Safety Engineering Association
• /
• s.37
• /
• pp.74-83
• /
• 2006

As there are more accidents which are more serious in construction site than other industries, it needs the safety management system to be SLIM on the same time, there are still lots of difficulties to prevent those accidents exactly, so it also needs a safety supervision team to prevent the accident, unsafe operation and condition before happening, which is also called as a Man-to Man safety management method. The range of the job site in one personnel's management is very big and large, so it needs the personnel to deep watch the safety operation and prevent any unsafe/fire accidents; the personnel also should find out the unsafe points in the job site, and carefully supervise the dead angle site, then support the totally safety management POINT and realize the ZERO accident.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.13-25
• /
• 2005

As there are more accidents which are more serious in construction site than other industries, it needs the safety management system to be SLIM on the same time, There are still lots of difficulties to prevent those accidents exactly, so it also needs a safety supervision team to prevent the accident, unsafe operation and condition before happening, which is also called as a Man-to-Man safety management method. The range of the job site in one personnel's management is very big and large, so it needs the personnel to keep watch the safety operation and prevent any unsafe/fire accidents. Also the personnel also should find out the unsafe points in the job site, and carefully supervise the dead angle site, then support the totally safety management POINT and realize the ZERO accident.

• International Journal of Safety
• /
• v.6 no.2
• /
• pp.13-16
• /
• 2007

This study focuses on the trends and issues of improving safety management of elevators in Korea. Frequency and severity of accidents in relation to conditional pass in periodic inspection, maintenance, market surveillance are analyzed based on the statistical data and social cost due to a variety of related fields in managing elevator safety was estimated first. The results of statistical analysis performed in this study will provide logical basis and future direction for improving the safety management system. The role of certification and supervision is particularly addressed to reduce the related accidents and the social cost. The effectiveness of such procedures can be found from the results of simple statistical analysis.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.3
• /
• pp.90-97
• /
• 2019

The International Civil Aviation Organization(ICAO) recently established the Global Aviation Safety Plan(GASP) for national aviation safety management, along with the enactment of Annex 19, Safety Management System(SMS). ICAO require the establishment of the 'States Safety Programs(SSP)' for countries with excellent safety evaluation, including Korea, and the establishment of aviation safety supervision systems for all Contracting States by 2017 under the enactment of ICAO Annex 19. Required. The Ministry of Land, Infrastructure, and Transport has continuously invested in R&D to secure such aviation safety systematically, and is making efforts to develop and disseminate related technologies by establishing long-term R&D roadmaps. A study on aviation safety supervision among the system-based aviation safety supervision support technology development R&D project, which is underway as part of the aviation safety technology development project of the Ministry of Land, Infrastructure and Transport. We conducted a study to see if this methodology logically guarantees reasonableness.