• 한국화재소방학회논문지
• /
• 제24권2호
• /
• pp.162-171
• /
• 2010

산업의 발전에 따라 사회양상도 복잡 다양하게 변화하여 오고 생활의 편리함도 늘어났지만, 그에 따른 화재위험요인도 함께 증가하고 있다. 최근 국내 건축물 환경도 초고층화 인텔리전트(Intelligent)화 되어가면서 화재로 인한 인적 물적 손실은 계속적으로 증가하고 있어 과거보다 화재발생을 줄일 수 있는 제도적 장치를 보완하여야 한다. 본 연구의 목적은 특정소방대상물 관리제도에 대한 전반적인 운영 실태와 문제점을 도출하여 특정소방대상물의 방화관리 등급체계 개선방안을 제시하는데 있다. 개선방안으로는 화재 위험성 평가제도 도입, 가칭 "소방안전공사"의 신설, 특정소방대상물 방화관리등급 재분류, 초고층 및 지하심층 건축물에 방화관리자 신설 등이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.179-183
• /
• 2010

The safety accident is one of the formidable issues in construction field, and in order to prevent safety accident, contractors perform safety education, safety control document, meeting with labors, and safety instruction in construction phase. However, safety accident is occurred continuously, it is needed to analyze which factors are affected to safety accident. day of the week, daily construction cost, and daily work task were selected as those factors. The result in this research represented that those factors were not considered as an critical one in safety accident. Because of approach limitation to safety accident, only two case studies were collected. If more safety accident cases are gathered in future study, it will clarify the cause of safety accident and will prevent safety accident.

• 대한안전경영과학회지
• /
• 제14권4호
• /
• pp.31-37
• /
• 2012

Recently buildings are constructed in larger and higher scales and becoming more complex. However from small to large scale buildings and on construction sites there still are fire safety accidents that occur continuously. Therefore to improve fire safety plan, examining the actual fire safety management and understanding fire risk analysis Using Fire Modeling through Computer Simulation. On this study, the permissible evacuation times were estimated for smoke fall, temperature, CO concentration, viability, etc. Fire safety management plans for fire safety were suggested.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.255-258
• /
• 2015

Scaffolds are frequently used in construction projects. Despite the impact on the entire safety, scaffolds are rarely analyzed as part of the safety planning. While recent advances in BIM (Building Information Modeling) provides opportunity to address potential safety issues in the early planning stages, it is still labor-intensive and challenging to incorporate scaffolds into current manual jobsite safety analysis which is time-consuming and error-prone. Consequently, potential safety hazards related to scaffolds are identified and presented during the construction phase. The objective of this research is to integrate scaffolds into automated safety analysis using BIM. A safety checking system was created to simulate the movements of scaffolds along the paths of crews using the scaffolds. Algorithms in the system automatically identify safety hazards related to activities working on scaffolds. Then, the system was implemented in a commercially available BIM software program for case studies. The results show that the algorithms successfully identified safety hazards that were not noticed by project managers of the projects. The results were visualized in BIM to facilitate early safety communications.

• Wind and Structures
• /
• 제14권3호
• /
• pp.253-283
• /
• 2011

This paper presents the field measurement results of wind effects on a super-tall building (CITIC Plaza, 391 m high) located in Guangzhou. The field data such as wind speed, wind direction and acceleration responses were simultaneously and continuously recorded from the tall building by a wind and vibration monitoring system during two typhoons. The typhoon-generated wind characteristics including turbulence intensity, gust factor, peak factor, turbulence integral length scale and power spectral density of fluctuating wind speed were presented and discussed. The dynamic characteristics of the tall building were determined based on the field measurements and compared with those calculated from a 3D finite element model of the building. The measured natural frequencies of the two fundamental sway modes of the building were found to be larger than those calculated. The damping ratios of the building were evaluated by the random decrement technique, which demonstrated amplitude-dependent characteristics. The field measured acceleration responses were compared with wind tunnel test results, which were found to be consistent with the model test data. Finally, the serviceability performance of the super-tall building was assessed based on the field measurement results.

• 대한안전경영과학회지
• /
• 제24권2호
• /
• pp.155-161
• /
• 2022

Recently, the number of cases of fire spreading due to exterior materials of buildings is increasing. Due to the nature of modern architecture, which emphasizes the aesthetics of buildings, because buildings pursue a splendid appearance, they are inexpensive and have relatively good insulation performance, but an increasing number of buildings are adopting insulation materials that have poor fire safety performance. The risk of spread is also greatly increased. Since the exterior wall of a building is made of a variety of materials and structures, it is composed of a combination of several elements, including materials such as insulation and finishing materials. Therefore, it was determined that it was necessary to introduce a more systematic evaluation method for building exterior materials, and to improve the system reflecting this, away from the existing evaluation method that only checked the fire safety performance of finishing materials.

• International Journal of Advanced Culture Technology
• /
• 제9권4호
• /
• pp.363-375
• /
• 2021

The purpose of this study is to analyze the safety of evacuation using the Pathfinder program for the alert at once, the priority alarm method, the priority alarm method for the four floors above, and the sequential priority alarm method, which is a modification of the priority alarm method specified in the tourist hotel building. Currently, in Korea's National Fire Safety Codes (NFSC), fire alarm methods are compulsorily applied differently depending on the number of floors and total floor area of a building. Although the growth rate is getting faster due to the diversification of building structures, it is still an obstacle to improving evacuation safety to comply with the standardized fire alarm method in NFSC. As a result of the experiment, the evacuation time was found to be faster with the priority alarm method for the four floors above than the priority alarm method applied to the specific firefighting object. Compared to the priority alarm method applied to the tourist hotel, which is a specific firefighting target with 5 or more floors and a total floor area of more than 3,000m2, the time was shortened by 3.7 seconds when measured by applying the priority alarm method for the four floors directly above. This indicates that it is necessary to take measures to select a fire alarm method suitable for the structure and environmental conditions of the building rather than applying the uniform NFSC regulations.

• 한국건축시공학회지
• /
• 제21권6호
• /
• pp.665-676
• /
• 2021

노후 건축물의 수가 증가함에 따라, 건물의 안전진단, 유지 보수에 대한 중요성이 증가하고 있다. 기존 외관 조사는 점검자의 주관적인 판단이 수반되어 평가 결과가 다르고 객관성과 신뢰성이 떨어진다. 따라서 본 연구는 기존 연구를 통해 기실시된 외관 조사 및 상태 평가 프로세스의 한계를 제시하였으며, UAV, Laser Scanner를 통해 3D Point Cloud 데이터를 수집하였다. 또한, Reverse Engineering 기술을 이용하여 3D 모델을 생성한 후 객관적인 상태평가 데이터를 취득하였다. 이후 기존의 정밀검사 데이터와 정밀 안전진단 데이터를 활용하여 DNN 구조를 생성하고, 고정밀도 측정 장치를 이용하여 얻은 상태평가 데이터를 적용하여 객관적인 건물안전등급을 산출하였다. 자동화된 프로세스는 20개의 노후된 건축물에 적용되며 동일 면적 건축물 기준 수작업으로 실시되는 안전진단의 시간에 비해 약 50% 감소하였다. 이후 본 연구에서는 안전등급 결과값과 기존값을 비교하여 안전등급 산출과정의 정확성을 검증하고 약 90%의 높은 정확도를 가진 DNN을 구축하였다. 이는 향후 노후 건물의 안전등급 산정의 신뢰성이 향상되고 비용과 시간을 절약해 경제성이 향상될 것으로 기대된다.

• 한국지반환경공학회 논문집
• /
• 제20권12호
• /
• pp.27-32
• /
• 2019

재난안전 관리정보 표준화는 재난관리의 과정(예방, 대비, 대응, 복구)을 통일화 및 단순화함으로써 재난관리의 효율성을 높이고, 국민의 생명과 재산 피해를 최소화하기 위해 필요하다. 재난안전 표준화는 과거의 재난안전 정보를 표준화하여 불확실한 미래에 대응하고 이에 따른 재난안전 관리를 체계적으로 하는 데 있다. 본 연구는 다양하고 복잡한 환경 재난 중 최근 사회적으로 관심이 많은 지진, 화재, 미세먼지 등의 재난안전 정보를 목적에 적합하게 데이터로 활용할 수 있도록 표준 코드 체계를 개발하였다. 이는 재난이 발생하면 실무자가 효율적인 재난 업무를 수행 할 수 있도록 지원하고자 한다.

• 대한건축학회논문집:계획계
• /
• 제35권4호
• /
• pp.37-44
• /
• 2019

According to the statistical surveys and studies, insufficient maintenance in the use of existing buildings caused fire and collapse accidents. In this respect, I analyzed the data managed by the current building maintenance and inspection system to find out the actual state of safety management and proposed two significant results. First, regarding the state of the buildings, the safety management status of the small-sized ones, where 20 years or more passed after construction, is the worst and a priority improvement plan is required. Second, there are eight deeply concerning factors for the fire incidents and collapse accidents of buildings. In the order of high risk, these factors are structural strength (seismic design), exterior wall finishing material, basement floor, interior finishing materials, other evacuation facilities, corridors stairs entrances, rooftop, fire partition. We need to have more special designs and management plans regarding high-risk factors as a system to prevent accidents in the building.