• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.4
• /
• pp.259-268
• /
• 2019

One of the most effective methods to consistently ensure the safety of a tap water supply can be achieved by application of a comprehensive risk assessment and risk management approach for drinking water supply systems. This approach can be termed water safety plans(WSP) which recommended by WHO(world health organization) and IWA(international water association). For the introduction of WSP into Korea, 150 hazards were identified all steps in drinking water supply from catchment to consumer and risk assessment tool based on frequency and consequence of hazards were developed. Then, developed risk assessment tool by this research was implemented at a water treatment plant($Q=25,000m^3/d$) to verify its applicability, and several amendments were recommended; classification of water source should be changed from groundwater to stream to strengthen water quality monitoring contaminants and frequencies; installation of aquarium to monitor intrusion of toxic substances into raw water; relocation or new installation on-line water quality analyzers for efficient water quality monitoring; change of chlorination chemical from solid phase($Ca(OCl)_2$) to liquid phase(NaOCl) to improve soundness of chlorination. It was also meaningful to propose hazards and risk assessment tool appropriate for Korea drinking water supply systems through this research which has been inconsistent among water treatment authorities.

• Journal of Navigation and Port Research
• /
• v.43 no.1
• /
• pp.57-63
• /
• 2019

It is time to study safety improvement on container terminals to maintain a high-quality service to customers' productivity and safety. The data analyzed was of the past 3 years accidents data from a container terminal in the Busan port. I especially tried to found out the equipment that had the highest number of accidents and what the main causes were. This study suggests the top hazards identified in the container terminal using risk assessment, Moreover, it seeks control measurements to prevent hazards by bowtie methodology.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.80-88
• /
• 2017

Although hazard identification is one of the most important steps of safety management process, numerous hazards remain unidentified in the construction workplace due to the dynamic environment of the construction site and the lack of available resource for visual inspection. To this end, our previous study proposed the collective sensing approach for safety hazard identification and showed the feasibility of identifying hazards by capturing collective abnormalities in workers' walking patterns. However, workers generally performed different activities during the construction task in the workplace. Thereby, an additional process that can identify the worker's walking activity is necessary to utilize the proposed hazard identification approach in real world settings. In this context, this study investigated the feasibility of identifying walking activities during construction task using Wearable Inertial Measurement Units (WIMU) attached to the worker's ankle. This study simulated the indoor masonry work for data collection and investigated the classification performance with three different machine learning algorithms (i.e., Decision Tree, Neural Network, and Support Vector Machine). The analysis results showed the feasibility of identifying worker's activities including walking activity using an ankle-attached WIMU. Moreover, the finding of this study will help to enhance the performance of activity recognition and hazard identification in construction.

• Journal of the Korean Society of Safety
• /
• v.37 no.6
• /
• pp.96-101
• /
• 2022

The Occupational Safety and Health Act holds that industrial safety helmets can be used as protective equipment to prevent the risk of injury in fall accidents. To better understand the importance given to PPE for the head, we analyzed the relevant regulations and guidelines in developed countries and reviewed the guidelines on testing safety helmets. The PPE regulations in Korea were notably different from those in other countries. First, except in Korea and Japan, safety helmets were used for protection against falling objects, flying objects, impact, or electric shock. However, the regulations did not recognize safety helmets as a PPE against fall hazards. Second, the impact energy applied on the helmet was within the range 50-100 J, and the helmet could protect only the upper part of the head against hazards such as the impact of falling objects, flying objects, etc. Third, in Korean regulations, the term "fall" was used in relation to the parts where the safety helmet was specified as a fall hazard PPE, unlike in other countries. We propose that the term "fall" should be revised to "shock" in Korean regulations for the safety helmet.

• Safety and Health at Work
• /
• v.6 no.2
• /
• pp.85-89
• /
• 2015

Background: The study was designed to assess the changes in working conditions through a comparative analysis of the characteristics of working conditions in 2006 and 2010. Methods: We performed a comparative analysis of the data related to the first Korean Working Conditions Survey (KWCS) and the second KWCS in the categories of demographic characteristics, quality of labor, exposure to hazards, and health problems. Results: From our analysis of the demographic characteristics, we saw an increase in labor force participation rate of women and elderly people. As a result of the investigation with regards to working hours, the ratio of employees who worked for ${\geq}49$ hours per week was decreased and the ratio of employees who worked for ${\geq}40h/wk$ increased. As for exposure to hazards, exposure to tobacco smoke notably decreased in 2010 compared with 2006. With regards to health problems, there was a sharp increase in the number of people who complained of muscle pain in their arms and legs. Conclusion: KWCS data included many aspects of working conditions as a nationwide sample. In addition, because this is a periodic nationwide survey, the labor force, working hours, harmful factor exposure, and the change in health problems characteristics according to the flow of time could be investigated. The information comparing the main results of the first survey conducted in 2006 and the second survey conducted in 2010 obtained through this study can be used as an important base material for the establishment of the national policy.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.11a
• /
• pp.171-177
• /
• 2002

In the real environment, it is very limited for the trainees to participate the effective training using actual training equipments by themselves and also to simulate several hazard situations for safety because of the direct exposure to the hazards of the actual system. But the virtual environment(VE) can help the trainees to get the effective training participating by themselves and to simulate all kind of possible situation without the exposure to the hazards of the actual system. In this paper, the new idea is proposed for developing the virtual driving system to provide a realistic driving experience for safety driving. The proposed idea contains the contents of a virtual driving system.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.4
• /
• pp.45-52
• /
• 2002

In the real environment, it is very limited for the trainees to participate the effective training using actual training equipments by themselves and also to simulate several hazard situations for safety because of the direct exposure to the hazards of the actual system. But the virtual environment(VE) can help the trainees to get the effective training participating by themselves and to simulate all kind of possible situation without the exposure to the hazards of the actual system. In this paper, the new idea is proposed for developing the virtual driving system to provide a realistic driving experience for safety driving. The proposed idea contains the contents of a virtual driving system.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.139-145
• /
• 2015

In these days, hazards in laboratories are consistently increasing due to high technological advance in modern science. Efforts to prevent accidents in laboratories became law named [ACT ON THE ESTABLISHMENT OF SAFE LABORATORY ENVIRONMENT]. The law made laboratories more safely but it's not enough to keep up laboratory safety in advanced countries. To improve laboratory safety, this study reformed laboratory emergency response flow chart based on each emergency scenarios and its evaluated hazards in laboratories applied wireless hazard detecting equipments.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.7 no.3
• /
• pp.61-74
• /
• 2001

The prevention of marine accidents has been a major topic in marine society and various policies and countermeasures has been developed, applied to the industries. Formal Safety Assessment is a structured and systematic methodology, aimed at enhancing maritime safety, including protection of life, health, the marine environment and property, by using risk and cost-benefit assessments. In addition, it provides a means of being proactive, enabling potential hazards to be considered before a serious accident occurs. In this paper, we has been screening and ranking of hazards using fuzzy structural modeling method and quantitative risk assessment for the ship's collision in the last 10 years marine accidents.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.402-404
• /
• 2000

The train control system using radio is based on the radio communication between an on-board control system and a ground control system unlike other train control systems that rely on track circuit. To realize a new train control system based on a new principle, it is important to analyze safety in a systematic manner at an early stage, and identify important factors for the system. For this reason, we think a procedure that select hazards and identify their causes and allocate safety requirements to such hazards. This paper describes this procedure to realize system safety.