• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.873-882
• /
• 2022

Purpose: The purpose of this paper is to analyze accidents and potential risks occurring at container terminals and to conduct on safety management plans tailored to container terminals. Method: A model for establishing a safety management plan is presented through a case study of container terminal risk assessment and literature analysis. Result: According to the 'Statistics of Accidents in the Harbor Handling Industry', 2,800 people were killed or injured during port work for 10 years from 2011 to 2021. This corresponds to an occupational accident rate of one person every 1.5 days. As a method of improving these accidents and disasters, a highly effective safety management plan should be established to prevent the recurrence of accidents in accordance with the Special Act on Port Safety. It is proposed to establish a safety management plan that reflects the risk assessment of container terminals, safety organization, safety budget, safety rules, and safety education.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.2
• /
• pp.235-240
• /
• 2009

Approximately 95% of the world's trade moves by containers, primarily on large ships, but also on trains, trucks, and barges. The system is efficient and economical, but vulnerable. However, the rise of terrorism and the possibility that a container could be used to transport or actually be the delivery vehicle for weapons of mass destruction or high explosives have made it imperative that the security of shipping container system be greatly improved. This study proposed a trend of container security and its Countermeasures.

• Journal of the Korean Society of Safety
• /
• v.23 no.1
• /
• pp.24-27
• /
• 2008

The recent fire incident in an elementary school of Chonan city causes the media focus on the fire safety of residential container buildings. In this study, real fire tests were conducted in this kind of buildings. Fire temperature and radiant heat flux were measured, in order to investigate the hazard-reduction effects during the fire emergency of residential container buildings. According to the test results, flash over occur in 10 minutes, peak fire temperature was $935.5^{\circ}C$, peak radiant heat flux was $24.99kW/m^2$ at 8minutes after residential container building fire.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.1
• /
• pp.79-93
• /
• 1999

By the IMF condition, tax revenues of local governments are decreasing, under these conditions, container tax take important proportion in financial resources in Pusan Metropolitan City. However the container tax have time limit until 2001, that is, purposeful tax. But after the creating container tax, the level of accomplishment is very insufficient. So for the activation of local economy, we need active study on the existence problem of container tax. Though the abolition of container tax item is frequently discussed in central government, If the worst case comes, namely the abrogation, it gives big damages to the financial management of Pusan Metropolitan City. Therefore the container tax should be existent for both residents and local government. Because the expansion rate of container tax is so rapid, it makes very critical contribution to the stability and sound condition of Pusan Metropolitan City's finances.

• Journal of the Korean Society of Safety
• /
• v.15 no.3
• /
• pp.23-29
• /
• 2000

The objective of this paper is to study burst through the influence of overheating to affect a seamed container using the cookers with different materials and bottom sizes. Following result are drawn from this study; When bottom size of the roast meat had 24cm diameter, the upper part temperature of a seamed container was increased over $40^{\circ}C$. Therefore the cooker material without regard to cooker size had a great influence on the temperature of seamed container. For the natural stone plate which had bottom length 65cm, a seamed container was burst at the cooker temperature $801^{\circ}C$, the surface temperature of a burner $573^{\circ}C$. the upside temperature of seamed container $379^{\circ}C$, the downside temperature of seamed container $236^{\circ}C$ and ambient temperature $34^{\circ}C$. For the cooker of the same bottom area, the stone plate had greater influence on effect of temperature than aluminium cooker. Overheating had a great influence on the seamed container if the bottom or upside diameter of a cooker had been larger than a trivet.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.35-40
• /
• 2023

In order to prevent an ammonia container from bursting under conditions such as overcharging and abnormal temperature rise, it is necessary to prepare accident prevention measures through analysis of the operating mechanism of the Thermally Activated Pressure Relief Devices (TPRD) attached to the container. In this study, stress analysis acting on the ammonia container under pressurized conditions, density change analysis according to temperature change, and correlation between container filling amount and temperature and pressure change were presented. In addition, the maximum filling amount of the ammonia container was calculated, and the temperature and pressure at the filling amount were calculated through the phase equilibrium diagram. Based on this, the appropriate melting point of the Thermally Activated Pressure Relief Devices was derived and verified through a melting temperature experiment. Based on the results of this study, conditions for preventing ammonia container rupture accidents were suggested.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.9
• /
• pp.273-282
• /
• 2023

Recently, various technologies such as logistics automation and port operations automation with ICT technology are being developed to build smart ports. However, there is a lack of technology development for port safety and safety accident prevention. This paper proposes an AI-based shipping container loading safety management system for the prevention of safety accidents at container loading fields in ports. The system consists of an AI-based shipping container safety accident risk classification and storage function and a real-time safety accident monitoring function. The system monitors the accident risk at the site in real-time and can prevent container collapse accidents. The proposed system is developed as a prototype, and the system is ecaluated by direct application in a port.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.11a
• /
• pp.271-284
• /
• 2003

We developing for Gate-Container Yard model to execute the Input & Output process of containers which are waiting in container yard effectively and fast. The optimal model is developed to manage and trace the containers in yard. We developed the put-away strategies which considered the storage time for volume of transportation and the distance between blocks and gates using the MICRO-CRAFT (Computerized Relative Allocation Facilities Technique).

• Journal of the Korean Institute of Gas
• /
• v.17 no.6
• /
• pp.1-7
• /
• 2013

Internal pressure variation analysis and actual holding time test on ISO LNG tank containers which were made in Korea for the first time according to the special notification of ISO tank container manufacture have been conducted during the transport demonstration projects of the tank containers by tractor, train and ship. The internal pressure of the LNG tank container increased rapidly after LNG filling and dropped during moving the container. However, it was stabilized as time passed and followed the liquid-vapor equilibrium graph. In addition, actual holding time of the tank container was more than 20 days which was satisfied with the special notification of LNG tank container manufacture.

• Journal of Navigation and Port Research
• /
• v.43 no.1
• /
• pp.57-63
• /
• 2019

It is time to study safety improvement on container terminals to maintain a high-quality service to customers' productivity and safety. The data analyzed was of the past 3 years accidents data from a container terminal in the Busan port. I especially tried to found out the equipment that had the highest number of accidents and what the main causes were. This study suggests the top hazards identified in the container terminal using risk assessment, Moreover, it seeks control measurements to prevent hazards by bowtie methodology.