• 한국건축시공학회지
• /
• 제13권3호
• /
• pp.306-320
• /
• 2013

This study compares and analyses the existing safety inspection systems in Korea and Japan to establish and propose future safety inspection systems for multiple-unit dwellings in Korea. The results of the study are summarized below. First, the state of Korea's current safety inspection systems and policies for multiple-unit dwellings are compared with the systems and policies in Japan. Second, the differences between the safety inspection systems of the two nations are presented, and the issues in Korea are addressed. Third, methods to establish future safety inspection systems for multiple-unit dwellings based on the systems in Japan are proposed for application in Korea.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.104-105
• /
• 2014

Construction safety inspections come in a wide variety of types. The types of inspection are, 1) a self-checking and a periodical-checking by contractors, 2) a site inspection by Ministry of Land, Infrastructure and Transprt (MOLIT) or licensing organizations and 3) others. In this situation, there are needs to determine fuction of the safty inspection and roll of stakeholders for the inspection to avoid unnecessary duplication and serious omission. The result of this study indicates a guide line for improving of consturcion safety inspection systems as a fundamental research.

• 한국산학기술학회논문지
• /
• 제8권3호
• /
• pp.488-495
• /
• 2007

일반용 전기설비의 정기적인 전기안전 점검과 부적합 설비의 개선조치에도 불구하고 전기화재의 80% 이상이 일반용 전기설비에서 발생하였으며 전기안전점검제도에 대한 이해부족, 미점검 수용가 증가, 누전차단기 미설치 및 부적합 시설의 방치 등의 원인으로 전기안전사고를 예방하는 것이 더욱 어려워진다. 본 논문에서는 일반용 전기설비의 전기안전점검 제도, 안전점검결과 및 전기화재 통계를 분석하천 관련 문제점을 도출하였다. 또한 전기안전점검제도, 점검업무 수행 방법, 전기화재 통계 수립 및 전기안전의식, 원격전기안전점검 체계 측면에서 일반용 전기설비 안전관리 개선방안을 제시하였다.

• 한국안전학회지
• /
• 제32권1호
• /
• pp.53-59
• /
• 2017

Safety inspection activities of the facilities including the electricity, gas, building, and firefighting, etc. are individual checks by the separate law of each government department, comprehensive inspections for the specific managed facilities or during a weak season, and national safety overall diagnostics for the disaster prevention. Thus, types of the inspections are various and they have been carried out repeatedly as well as duplicately. That can make the people or institutes to take such inspections feel great burdens. Therefore, the investigation on the current situation of the individual inspection by the separate law for the electricity, gas, building, and firefighting, etc. as well as of various others by the government needs to be carried out and according to the results the repetitive and duplicated inspections should be reduced and converged to one comprehensive one. In this regard, we proposed solutions to improve the government safety inspection system, function, and role.

• 기술사
• /
• 제34권2호
• /
• pp.14-18
• /
• 2001

The primary cooling piping of HANARO is classified as safety class 3, seismic class 1 and quality class Q. This piping as safety related feature has been designed, manufactured and tested in accordance with ASME SEC. Ⅲ, DIV 1, Class 3. In October of 2000, the first step of the in-service inspection for this piping was carried out in accordance with ASME SEC. XI. This describes the results of the Inspection including the preparation of inservice inspection plan and inspection method. It is verified through the results that the safety related piping is maintained the mechanical and structural Integrities.

• 한국안전학회지
• /
• 제38권4호
• /
• pp.47-53
• /
• 2023

In the inspection of workplace hazards/risk factors by specialized institutions dedicated to safety management, inspection reports vary based on the inspectors, who lack the authority to enforce improvement of workplace hazards/risk factors. Thus, improvement and accident rates remain steady without decreasing. This study performed a regression analysis on the relationship between improvement and accident rates of categorized inspection items by classifying hazards/risk factors from inspection reports submitted by a specialized safety management institution in Chungbuk after inspecting 10 food and beverage manufacturers over the past three years. The hazards/risk factors were classified into five categories: mechanical, electrical, chemical, human, and environmental. The regression analysis revealed that the improvement rate of hazards/risk factors inspected by the specialized safety management institution influenced accident rates. To enhance improvement rates based on these findings, this study prioritized the correction of the five most frequently cited inspection items with the lowest improvement rates in each area. Based on these inspection items, this study suggested a checklist for use in workplace safety inspections of food manufacturers. This proposed checklist is expected to reduce accident rates in food manufacturing facilities. Currently, guidance and inspection of workplaces are mainly focused on accident rates rather than correcting hazards/risks. Thus, accident rates remain unchanged as workplace risks are inadequately improved according to the unique characteristics of each workplace. When conducting workplace guidance and inspection, policy measures and inspection methods are warranted to increase the improvement rate of hazards/risks.

• 자동차안전학회지
• /
• 제13권2호
• /
• pp.42-49
• /
• 2021

In this paper, we proposes a study on the derivation of inspection factors for the periodic inspection of large buses equipped with AEBS and LDWS. we investigate the safety evaluation (NCAP) of domestic and foreign vehicles and safety standards for the two functions currently in operation and analyze the evaluation factors, measurement methods and evaluation scenarios and so on. In addition, the test scenario was derived by analyzing the vehicle safety evaluation data already held, Therefore, we use an real large bus and the inspection elements for the periodic inspection were derived.

• 플랜트 저널
• /
• 제8권2호
• /
• pp.70-81
• /
• 2012

The study aims to supplement facility management plan and safety regulations & standard of oil pipeline by searching and reviewing related regulation & standard inside and outside of the country. Korean regulation & standard is reviewed based on harbor and fishery design standard of the ministry of maritime affairs and fisheries, general technology standard of oil pipeline safety regulation, gas excavation construction and safety maintenance indicator of Korea gas corporation. Global regulation & standard is reviewed based on U.S standard inspection for offshore pipeline and Europe/Mexico standard inspection for offshore pipeline. The contents of offshore pipeline installation is inserted into pipeline sector for objected facilities of safety inspection regulation & standard and, the standard of safety inspection for offshore pipeline is newly presented into pipeline maintenance part of the planning facilities management with its inspection period and method.

• 대한안전경영과학회지
• /
• 제25권4호
• /
• pp.57-65
• /
• 2023

The public safety management guidelines were introduced in 2019 and continue to be dedicated to advancing comprehensive measures for public safety management, with a primary focus on prioritizing the safety and well-being of the public within governmental institutions. To achieve this goal, our previous study developed a establishment procedure of risk assessment-based safety inspection system for public institutions that order construction projects and applied it to highway construction projects to evaluate its effectiveness. To enhance the practicality of the establishment procedure, it is essential to collect and analyze feedback from stakeholders regarding its performance and suitability. This study conducted a survey involving 200 participants who had experience with the establishment procedure, and performed statistical analyses to evaluate its performance and applicability. The survey results indicated that the participants reported a high level of satisfaction (scoring 4 and above on a 5-point Likert scale) in several areas: specialization of safety inspection items for different types of work (with a satisfaction rate of 65%), the evaluation process for safety ratings (64.5%), and their willingness to recommend the procedure to other institutions (75.5%). In the factor analysis with Varimax rotation, two factors emerged: (1) a specialization factor related to safety inspection items, and (2) a grading factor associated with safety evaluation results. Regression analyses of these factors unveiled significant positive relationships with improvements in safety and health performance, including the prevention of fatal accidents, heightened safety responsibility, and raised safety inspection standards. The establishment procedure of safety inspection system developed in our previous study can play a crucial role in reducing accidents resulting in fatalities and injuries at construction sites, ultimately contributing to a safer working environment for all involved parties.

• 대한안전경영과학회지
• /
• 제25권3호
• /
• pp.55-62
• /
• 2023

Public institutions have a responsibility to ensure the safety of their employees and the public. One way to do this is to implement a systematic safety inspection system based on risk assessments and continuous improvements. This study developed a systematic safety inspection system for public institutions that are ordered construction projects. The proposed system in this study consists of a three-step process: (1) developing safety grade evaluation tables, (2) preparing and conducting safety inspections, and (3) evaluating and improving safety management grades. The first step is to develop safety grade evaluation tables by analysis and diagnosis of the construction site's work type, disaster statistics, and related laws. The second step is to conduct safety inspections using the developed evaluation tables. The third step is to determine the safety management grade based on the results of the safety inspection, and to improve risk factors found during the safety evaluation. The proposed system was implemented in highway construction projects carried out by public institutions. The results showed that the proposed system has two major effects: (1) reducing accident-related deaths and injuries, (2) improving safety management levels by continuous evaluation and improvement. The proposed system can be utilized in construction projects ordered by public institutions to improve the level of occupational safety and health.