• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.175-181
• /
• 2018

Electric pump system is new technology for next generation propulsion unit. The system has simple structure which dose not need gas generator, injector and turbine and might better pump for low cost and low payload rocket. Therefore, this paper suggests conceptual design of electric-pump Permanent-Magnet Synchronous Motor (PMSM) which has 50 kW & 50,000 RPM for rocket. To satisfy the system's requirement, electromagnetic analysis is conducted for suitable inner and outer diameter of stator and rotor which uses 4000 Gauss cylinder magnet and Inconel 718 can to fix whole rotor. Futhermore, to confirm rotational vibration, rotordynamics analysis is conducted. By this analysis, Campbell diagram is printed. From the diagram, natural frequency could be determined for the only motor and dynamo meter test bench.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.1
• /
• pp.35-42
• /
• 2004

Ibuprofen (IBU), is a non-steroidal anti-inflammatory drug, used to treat rheumatoid arthritis, removal of fever and mild to moderate pain. Because of small dosage and very low accumulation in the body, IBU has been used to heal children's fever. However, IBU was very low solubility in a low pH and water (in water $0.03{\sim}2.5$ mg/ml). A nanoemulsion containing IBU by means of self-microemulsion drug delver system (SMEDDS) was prepared in order to enhance the solubility of IBU. The SMEDDS was composed of cosurfactant, oil and surfactant The solubility of IBU in various components such as cosurfactant, oil and surfactant was examined. $Carbitol^{\circledR}\;(386.99{\pm}20.5\;mg/ml)$ as a cosurfactant, $Labrafil^{\circledR}$　 M1944CS $(90.16{\pm}1.60mg/ml)$ as an oil and $Cremopher^{\circledR}$　 RH-40 $(239.01{\pm}2.8\;mg/ml)$ as a surfactant were used in this study for preparing SMEDDS. Optimized formulation of SMEDDS was obtained by phase diagram which express the section of nanoemulsion formation. The SMEDDS containing IBU had higher dissolution rate than conventional IBU sirups. Thus the SMEDDS was a potential candidate of stable conventional and effective oral dosage form for IBU.

• Journal of the Korean association of regional geographers
• /
• v.12 no.5
• /
• pp.583-594
• /
• 2006

Relics are life traces of ancestors, and they are good data for giving an idea about space locations of that period. This study classifies relics according to their type, and for each classified group metrical analysis is carried out using GIS and triangle diagram. The criteria used for analysis of relics' locations are elevation, road accessibility and water accessibility. The analysis results show that every relic has its own distribution characteristics according to the time and the type. This means high possibility of approaching a geographical focus on relics distribution and location. While historical period was taking over prehistorical, relics locations moved from the points of great usage water supply possibility to the points of great traffic accessibility. Also, relics of the ruling class for each time period generally have good locations.

• Korean Institute of Interior Design Journal
• /
• v.17 no.6
• /
• pp.71-81
• /
• 2008

The purposes of this research are to correctly understand the relationship between a visual communication structure and a semantic communication structure when integrating and changing various architectural visual information. This study will classify various diagrams, which have been actively applied to the works of Rem Koolhaas and MVRDV when designing architecture, and based on the classification, it will analyze how the expression viewpoints inherent in the diagrams are changed and applied to processing and changing architectural visual information. The transformal usage of the visual information of architectural diagrams is classified into an analysis-centered processing method and a concept-centered processing method, and the characteristics of their usage are analyzed. The former shows an observer-centered expression viewpoint which effectively delivers an architect's analyzed architectural information or intent to a customer or an observer. It also allows an easy perception of the analyzed data, and uses qualitative expression viewpoints. The method combines systematic expression viewpoints, which value a relationship with visual information, and various architectural visual information; uses the combined expression viewpoints as one diagram for delivering various information simultaneously and for changing visual information. The latter shows author-centered subjective expression viewpoints, which are different from reproduction-centered fixed expression viewpoints. This method uses arbitrary expression viewpoints that overly extort, change or manipulate visual information. It shows simultaneous expression viewpoints that integrate various architectural visual information via omniscient expression viewpoints, such as reversing or projecting the points of viewing subjects, which human beings cannot perceive.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.25-31
• /
• 2018

Recently, research on the development of lightweight vehicle bodies is increasing continuously as a response to fuel economy regulations. To reduce the weight of a vehicle body, a conventional steel plate has been substituted by light weight material with high specific strength and the jointing of multi-materials is generally applied. On the other hand, the customer's demand for safety and emotional quality in NVH (Noise, Vibration and Harshness) is becoming increasingly important. Therefore, a light weight with proper strength and NVH quality is needed. In the view of light weighting and NVH quality, the application of a vibration proof steel plate can be an effective solution but the formability of a sandwich panel is different with a conventional steel sheet. Therefore, careful analysis of formability is required. This study aims to characterize the formability of a sandwich high-strength steel plate. The high-strength steel plates of different thicknesses with resistance spot welding and sealer bonding were analyzed using forming limits diagram through a cup drawing test.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1263-1271
• /
• 2000

This study investigated the floc structure and removal of turbidity and organic matter by alum coagulation. Results of this study indicated that sweep floc and charge neutralization area were shifted to more acidic region than that in the Amirtharajah's diagram. This was caused by organic matter present in the raw water. Removal regions of turbidity and organic matter were generally overlapped. However, organic matters was removed better at lower pH than turbidity. Floc structure was characterized by measuring fractal dimension and volume diameter using AIA and SALLS. SALLS method was found to be more reliable than AIA method. Floes in sweep floc region had larger size and fractal dimension than flocs in charge neutralization region. As pollutant removal increased, larger fractal dimension and size of floc were measured.

• The KIPS Transactions:PartA
• /
• v.10A no.5
• /
• pp.503-512
• /
• 2003

Recently many applications are being developed as web technologies are evolved rapidly, but the development emthodology and quality improvement speed of the web apllications is not so. The creations of Most web applications have developed depending on the developer's knowledge and experience without a systematic development methodologies. But the web-based application systems require the various developing gechniques and the rich developing methodogies for a design process. This paper applies the UML(Unified Modeling Language) supporting an object-oriented development methodology to the design and implementation of a mobile customer management system. That is, it appliesthe UML to the system modeling based on a story board and a requirement specification at the web development of the similar web applications. Applying UML to this system achieved the analysis and the design of an web application effciently.

• Journal of The Korean Astronomical Society
• /
• v.10 no.1
• /
• pp.23-30
• /
• 1977

We have collected times of minimum light available in the literature for WZ Andromedae and analyzed the nature of the period variations. The O-C diagram of WZ And clearly shows that two abrupt changes near JD 2418000 and JD 2435000 are deduced by dp/p=$+4.24{\timesa}10^{-6}$ and dp/p=$-2.46{\times}10^{-6}$, respectively. For these period changes, we have introduced the equations which represent mass exchange in the close binery systems given by Biermann and Hall (1973), and the computation yieleled a mass flow of $7.42{\times}10^{-5}M$. from the hotter component to the cooler one. Due to the amount of mass flow, the period decrease may also be calculated. The theoritical new period after JD 2435000 became 0.69565858 days, which is in good agreement with the value 0.69566034 days found in the O-C diagram. In this computation, the mass ratio of WZ And suggested that the hotter star is the filling its Rochclooe, and thus WZ And is in Paczynski's stage II.

• Economic and Environmental Geology
• /
• v.11 no.2
• /
• pp.47-57
• /
• 1978

The study focused on the petrology and petrochemistry of the so called "Ganghwa syenitic rocks" which intruded into metasediment of basement in southeastern part of Ganghwa Island. The geologic sequence of the mapped area was shown in table 1, 10 model analyses and 7 chemical analyses on the rock samples taken from the Ganghwa syenitic rocks and Manisan granite have been used to discuss the nomenclature of the rocks and petrological relationship between rock types. The petrograpical and petrochemical features based on, the analyses are as follows: 1) Ganghwa syenitic rocks consist of Ganghwa alkali syenite and Ganghwa diorite porphyry which based on the classification of the subcommision on systematics of igneous of IGUS. Ganghwa diorite porphyry which occured as dike forms are intruded into Ganghwa alkali syenite. The rock forming minerals of Ganghwa alkali syenite are composed of perthite, plagioclase, quartz, hornblend and chlorite in major, and zircon, apatite, sericite and magnetite in minor. Ganghwa diorite porphyries consist of plagioclase, biotite, hornblend, orthoclase and chlorite, with, porphyritic texture. 2) In silica-oxides variation (Fig. 2) and AMF diagram (Fig_ 3), the Ganghwa alkali syenite is similar to the trend of Daly's average basalt-andesite-dacite-rhyolite than Skaergaard which shows the trend of the fractional crystallization of magma, and equivalent to the alkali rock series by Peacock. 3) The general trend of data points shift to plagioclase, and are superimposed on the alkali rich terminal part of the granodiorite province of SW Finland in normative Q-Kf-Pl(Fig. 4) and Or-Ab-An diagram respectively. The above-mentioned evidences suggested that the Ganghwa syenitic rocks are the differential products resulted by assimilation of intermediated magma and metasedment rock under relatively rapid cooling condition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.6
• /
• pp.519-525
• /
• 2008

For this study, SM45C steel rods using generally for power transmission shafts and machine components was selected and welded by butt-GMAW method. And then it was studied about estimation of fatigue strength and the region of infinite life by Haigh diagram using Goodman's equation. Fatigue strength in weld zone presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. This result agrees with distribution of hardness in weld zone. Fatigue strength in base metal zone presents highly compared with weld zone in low cycles between $10^4$ cycles and $10^6$cycles, but it presents the lowest fatigue strength on the order of heat affected zone in the vicinity of $10^6$cycles. It is the result that the first high compressive residual stress distributed by drawing process of the steel rods is released and the base metal is softened by alternating stresses. The region of infinite life by Haigh diagram presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. From this results, it is demanded that the stress for safety design of machine components using SM45C butt-welded steel rods must be selected in the region of the lowest infinite life of heat affected zone.