• 말소리와 음성과학
• /
• 제4권1호
• /
• pp.21-28
• /
• 2012

Many previous studies reported acoustic parameters of English vowels produced by a clear speaking style. In everyday usage, we actually produce speech sounds with various speaking styles. Different styles may yield different acoustic measurements. This study attempts to examine pitch and formant trajectories of eleven English vowels produced by nine American males in order to understand acoustic variations depending on clear and conversational speaking styles. The author used Praat to obtain trajectories systematically at seven equidistant time points over the vowel segment while checking measurement validity. Results showed that pitch trajectories indicated distinct patterns depending on four speaking styles. Generally, higher pitch values were observed in the higher vowels and the pitch was higher in the clear speaking styles than that in the conversational styles. The same trend was observed in the three formant trajectories of front vowels and the first formant trajectories of back vowels. The second and third trajectories of back vowels revealed an opposite or inconsistent trend, which might be attributable to the coarticulation of the following consonant or lip rounding gestures. The author made a tentative conclusion that people tend to produce vowels to enhance pitch and formant differences to transmit their information clearly. Further perceptual studies on synthesized vowels with varying pitch and formant values are desirable to address the conclusion.

• 한국방사선학회논문지
• /
• 제9권2호
• /
• pp.73-77
• /
• 2015

검출기의 자세한 구조를 알고자 CT 스캐닝을 하였으며 크리스털 형상과 사층에 관한 세부적인 구조를 전산모사 계산법을 이용해 재현하였다. 낮은 에너지의 감마선에 대한 피크 효율이 거리가 작아질수록 감소, 보다 높은 에너지(400 keV) 아상에서의 전체 효율성은 검출기 코어를 조정함으로써 불확도를 줄일 수 있었다. PENELOPE 계산법을 이용해 얻은 공간적 의존성 사이에 적절한 일치점이 달성되었음을 확인 하였다. 이는 크리스털 코어, 모서리와 크리스털 코어의 라운딩을 설명해 주는 매개변수들을 조정함으로써 달성되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.319-319
• /
• 2012

현재 폭넓게 이용되고 있는 STI (Shallow Trench Isolation) 공정에서 active edge 부분에 발생하는 기생 transistor의 subthreshold hump 특성을 제어하는 연구가 활발히 이루어지고 있다. 일반적으로 STI 공정을 이용하는 MOSFET에서 active edge 부분의 얇게 형성된 gate oxide, sharp한 active edge 형성, STI gap-fill 공정 중에 생기는 channel dopant out-diffusion은 subthreshold hump 특성의 주된 요인이다. 이와 같은 문제점을 해결하기 위해 active edge rounding process와 channel dopant compensation의 implantation을 이용하여 subthresold hump 특성 개선을 연구하였다. 본 연구는 STI 공정에 필요한 wafer와 phosphorus를 함유한 wafer를 한 chamber 안에서 auto-doping하는 방법을 이용하여 subthresold hump 특성을 구현하였다. phosphorus를 함유한 wafer에서 빠져나온 phosphorus가 STI 공정중인 wafer로 침투하여, active edge 부분의 channel dopant인 boron 농도를 상대적으로 낮춰 active edge 부분의 가 감소하고 leakage current를 증가시킨다. transistor의 channel length, gate width이고, wafer#No가 클수록 phosphorous를 함유한 wafer까지의 거리는 가까워진다. wafer #01은 hump 특성이 없고, wafer#20은 에서 심한 subthreshold hump 특성을 보였다. channel length 고정, gate width를 ~으로 가변하여 width에 따른 영향을 실험하였다. active 부분에 대한 SCM image로 확인된 phosphorus에 의한 active edge 부분의 boron 농도 감소와 gate width vs curve에서 확인된 phosphorus에 의한 감소가 narrow width로 갈수록 커짐을 확인하였다.

• 한국통신학회논문지
• /
• 제33권11C호
• /
• pp.932-939
• /
• 2008

공간 다중화 방식의 MIMO(Multiple-Input Multiple-Output) 시스템에서 MLD(Maximum-Likelihood Detector)는 최적의 성능을 보이지만, 그 복잡성이 상당히 큰 단점이 있다. 이를 보완하기 위해 여러 가지 기법들이 제안되었으며, Lattice-reduction(LR) 검출기 또한 MIMO 시스템의 성능을 개선하기 위해 제안되었다. 본 논문에서는 확장된 잡음분산 행렬을 이용해 rounding operation 과정에서 발생하는 양자화 오류를 이용해 송신 신호 벡터에 근접한 candidate symbol set을 찾고, 여기서 Semidefinite Relaxation을 이용해 최대 우도 symbol을 검출한다. 그러나 그 복잡도는 MLD의 복잡도 보다 현저히 작고, LR 검출기의 복잡도에 근접한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.208-210
• /
• 1994

In this paper, the design sensitivity evaluation based on the 2-dimensional finite clement discretization is presented for the voltage source and eddy current problem. And it is applied to the two shape design problems of the rotor slot of 3-phase squirrel cage induction motors. The first is to increase the starting torque while keeping the rated torque fixed. The other is only to increase the torque at the rated speed while keeping the starting torque fixed. As an optimization method, the Gradient Projection method is used to control casily the torques for various speeds of rotor. One fourth of rotor is analyzed by using a semi-periodic boundary condition. Because the shape of rotor slot has much influence on the slip torque characteristic, the 10 design parameters are taken on the interface between rotor core and rotor bar. The initial shape of rotor slot is the trapezoidal typo with rounding corners.

• 대한치과의사협회지
• /
• 제48권4호
• /
• pp.297-307
• /
• 2010

Noncarious cervical lesions(NCCLs) are characterized as structural defects found on the tooth surface of the cement-enamel junction. Loss of tooth structure through noncarious mechanisms may vary in etiology and clinical presentation for each individual but presently many clinician now classify this as tooth failure of abfraction due to the stress applied in the cervical area of the tooth under oral physiological and pathological loads. In the current study, we investigated the stress distribution of maxillary premolar with NCCL using simulated 3D finite element analysis. The results were as follows: 1. In the sound maxillary premolar, the stresses were highly concentrated at cervical enamel surface of the mesiobuccal line angle, asymmetrically. 2. Once the lesion has been formed, the highest stress concentration was observed around the apex of the wedge shaped lesion. 3. In four types of NCCL, the patterns of stress distribution were similar and the peak stress was observed at mesial corner and also stresses concentrated at lesion apex. 4. Lesion cavity modification of rounding apex, reduced stress of lesion apex. 5. When restoring the notch-shaped lesion, material with high elastic modulus worked well at the lesion apex and material with low elastic modulus worked well at the cervical cavosurface margin.

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.59-69
• /
• 2013

An alternative technique to control multilevel inverters with vector approximations has been presented. The innovative control method utilizes specially designed two-dimensional hysteresis comparators to simplify the implementation and improve the resultant waveform. The multistage inverter designed with maximum number of levels is operated in such a way to approximate the reference voltage vector by exploiting the large number of multilevel inverter vectors. A three-stage inverter with the main high voltage stage made of three phase, six-switch and singly-fed inverter is considered for application to the proposed design. The proposed control concept is to maintain a higher voltage stage state as long as it can lead to a target vector. High and medium voltage stages controllers are based on surface hysteresis comparators to hold the switching state or to perform the necessary change to achieve its reference voltage with minimal switching losses. The low voltage stage controller is designed to approximate the target reference voltage to the nearest inverter vector using the nearest integer rounding and adjustment comparators. Model simulation and prototype test results show that the proposed control technique clearly outperforms the previous control methods.

• 대한전자공학회논문지SD
• /
• 제42권10호
• /
• pp.29-34
• /
• 2005

최대 양자화 오차는 W 비트 입력으로부터 W 비트의 곱을 출력하는 고정길이 곱셈기의 성능에 많은 영향을 준다. 본 논문에서는 고정길이 modified Booth 곱셈기의 오차범위를 분석한 후 최대오차를 줄이기 위해 추가해야 하는 칼럼 수를 결정하는 방법을 제안한다. 또한, 오차범위 분석방법이 reduced-width 곱셈기 디자인 시에도 적용할 수 있음을 보인다. 시뮬레이션을 통해 제안한 오차분석 방법이 고정길이 modified Booth 곱셈기의 실제 디자인에 유용하게 사용될 수 있음을 보인다.

• 한국동물학회지
• /
• 제39권2호
• /
• pp.173-181
• /
• 1996

The time-course process by which spermatozoa penetrates through the micropvle apparatus into the egg cytoplasm of rainbow trout, Oncorhvnchus mvkiss, was examined with transmission and scanning electron microscopy. In the unfertilized egg, the ess surface beneath the inner opening of the micropylar canal did not differ distinctly from the rest of the animal pole area. A spermatozoon attached to the micropvle opening 20 seconds after insemination. In the initial stases of penetration, the spermatozoon still within the micropvlar canal attached perpendicularly at its apical tip to the ess surface, then the sperm head was rapidly engulfed by the folded egg surface with its manly microvilli. A large fertilization cone with microvillus-free surface appeared on the esS surface sutra-rounding the penetrating spermatozoon. The head portion of the penetrating spermatozoon was completely wrapped by the ess surface with only the tail portion visible externally 30 seconds after insemination. The fertilization cone displayed the tail portion of the penetrating spermatozoon on the central portion of its surface 60 seconds after insemination. 150 seconds after insemination, breakdown of the cortical granules elevation were initiated at the animal pole, then completed at the vegetable pole area. The spermatozoon disappeared from the outer surface of the ess before the fertilization cone completely retracted 250 seconds after insemination. In result, the block to polvspermv to permit entry of a sin81e sperm is considered to be mechanical by the rnorpholoSical design of the micropvle and fertilization cone.

• 생명과학회지
• /
• 제17권10호
• /
• pp.1361-1367
• /
• 2007

Nocardiopis sp. 유래의 protein kinase 저해제인 KT5720, KT5926을 사용하여 Vesicular Stomatitis Virus (VSV) 증식에 미치는 세포변성의 억제를 지표로서 연구하였다. 그 결과 CAMP의존 kinase를 저해하는 KT5720, mysion light chain kinase (MLCK)를 저해하는 KT5926이 VSV에 의한 세포변성을 억제시켰다. Protein kinase inhibitor KT5720은 VSV의 증식에 영향을 미치지는 않지만, 세포변성과정은 억제하는 것으로 나타났다. Virus RNA 및 단백질 합성에서 PKA KT5720이 영향을 미치지 않는 것은 virus 증식에 영향이 없는 것으로 나타난다. Virus 증식과정에서 성질이 다른 protein kinase가 관여하는데, 이것은 negative strand virus에 대한 항virus 제 개발에 중요한 역할을 한다고 생각한다.