• 보존과학연구
• /
• s.26
• /
• pp.141-164
• /
• 2005

Most of the stone cultural properties is exposed to the weathering factor(rain, windetc.), so the shelter is constructed for reduction of its direct effect. But the shelter is indicated some problems that inharmoniousness of the surroundings, in section disturbance for insufficiency of light, the loss about the value of cultural properties and so on. So we have investigated on environmental condition (temperature, relative humidity, wind etc.) at the Standing Stone Buddhist Triad in Bae-ri, Gyeongju and Rock-carved Triad Buddha in Seosan because check the effect of the shelter. As the result, the Standing Stone Buddhist Triad in Bae-ri, Gyeongju is located a pine wood and a lot of bamboo grow naturally in nearing. Environmental difference on inside and outside of the shelter is not found because opened on all sides. But there is so dim for the direction of the sunlight that can't see the Standing Stone Buddhist. The base rock of Rock-carved Triad Buddha in Seosan well develop with crack and break, and the vegetation(trees, moss, lichen etc.) grow naturally in surroundings. Environmental difference on inside and outside of the shelter is found because closed on all sides and opened the front gate only inspection time. Inside of the shelter was too calm(air-velocity not detected) and humid(over 75%RH). Also the surface is occurred the dew(at 2-4 pm) and the efflorescence for effect of the water(rain, dew etc.). Besides the head of the central Buddhist is so dangerous for crack.

• Tunnel and Underground Space
• /
• v.25 no.1
• /
• pp.56-67
• /
• 2015

In this study, a source locating technique applicable to transversely isotropic media was developed. Wave velocity anisotropy was considered based on the partition approximation method, which simply enabled AE source locating. Sets of P wave arrival time were decided by the two-step AIC algorithm and they were later used to locate the AE sources when having the least error compared with the partitioned elements. In order to validate the technique, pencil lead break test on artificial transversely isotropic mortar specimen was carried out. Defining the absolute error as the distance between the pencil lead break point and the located point, 1.60 mm ~ 14.46 mm of range and 8.57 mm of average were estimated therefore it was regarded as thought to be 'acceptable' considering the size of the specimen and the AE sensors. Comparing each absolute error under different threshold levels, results showed small discrepancies therefore this technique was hardly affected by background noise. Absolute error could be decomposed into each coordinate axis error and through it, effect of AE sensor position could be understood so if optimum sensor position was able to be decided, one could get more precise outcome.

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.77-88
• /
• 2004

This study evaluates the occurrences, phyfical weathering and biological deterioration on rock properties during the dissection process an object of stone pagoda in the Mireuksaji temple site. For restoration and conservation, all kinds of rock properties are carried out detailed scientific investigation and diagnosis. Constituting rocks of the pagoda composed mainly of equi-granular medium grained biotite that rock properties presumed to be use about 3,000 materials. Main external properties of the pagoda are total 446 materials, and the rock properties under the concentration load on the each floors occurred with overlapping fracture, weathering and deteriorations. The 84 materials show highly degraded about $18.8\%$ among the external properties. Representative physicochemical deteriorations are fracture, loss, break, exfoliation, degradation, grain shaped dissolution, relief surface, discoloration and hydroxide precipitates, in this study, the deterioration state of each properties give a precisely description and analysis. Coverage of lichen and algae on the rock surface represented about $85\%$. As the some properties, biological contaminants withered up when spray rock surface with diluted cleaning chemicals. Results of the study are utilized an application for restoration system and detailed investigation during the dissection process of stone cultural properties.

• Tunnel and Underground Space
• /
• v.21 no.3
• /
• pp.151-163
• /
• 2011

The LCM test is one of the most powerful and reliable methods for designing the disc cutter and for predicting the TBM (Tunnel Boring Machine) performance. It has an advantage to predict the actual load on disc cutter from the laboratory test on the real-size large rock samples, however, it also has a disadvantage to transport and/or prepare the large rock samples and to need an extra cost for experiment. Moreover it is not easy to execute the test for jointed rock mass, and sometimes the design model estimated from the test can not be applied to the real design of disc cutter. In order to break this critical point, lots of numerical studies have been performed. PFC2D can simulate crack propagation and rock fragmentation effectively, because it is useful in particle flow analysis. Consequently, in this study, the PFC2D has been adopted for numerical analysis on cutting power of disc cutter according to the different angle of joint, the different direction of joint, and the different space of joint with jointed rock mass models. From the numerical analyses, it was concluded that the bigger cutting power of disc cutter was needed for reverse cutting direction to joint rather than for forward direction, and the cutting power of disc cutter was increased with decreasing the dip angle of joint and decreasing the space of joints in reverse cutting direction. The more precise numerical model for disc cutter can be developed from comparison between the numerical results and LCM test results, and the resonable guideline is expected for prediction of TBM performance and disc cutter.

• Explosives and Blasting
• /
• v.34 no.2
• /
• pp.18-30
• /
• 2016

A drill & blasting method using explosives is the most efficient way to break the rock in the urban projects. However, the blasting method cause vibration, noise and fly-rock as blast pollutions so that blasting wroks are restricted by adjacent structures such as apartment and residence houses. To conduct blasting works at near structures, the numbers of blast-holes a blast and the size of the blast are limited by kinds of detonators and initiation methods. So, the production rate is reduced and the construction period should be increased. Therefore, in this case the deck-charge blasting methods using available detonators in domestic market were designed and evaluated in order to confirm the application possibilities in specific urban sites.

• Explosives and Blasting
• /
• v.24 no.2
• /
• pp.83-91
• /
• 2006

Over the past few decades, blasting vibration has been mainly analysed to understand characteristics of far field vibration in the area comparatively far from blast hole in the respect of proving limit of building damage. However, over the last few years, many works have been carried out to estimate damage within the rock adjacent to a blast hole, especially for the Purpose of over break in tunnel blasting and rock slope stability There are several methods to estimate rock damage, but method of using blast vibration has been mostly used to estimate rock damage. Formerly, to estimate rock damage, method of expecting near field vibration using the characteristics of far field vibration had mainly used but nowadays, it is practically possible to measure near field vibration according to development of monitoring system. A few repels relating to this have been studied aboard, but very little work has been conducted in our country because of difficulty of monitoring and choice of monitoring system. Accordingly, in this Paper, measurements of near field vibration were conducted and wave forms were analyzed and some problems were investigated in measuring system.

• Tunnel and Underground Space
• /
• v.25 no.3
• /
• pp.293-302
• /
• 2015

Thin Spray-on Liner (TSL) has been considered as a new rock support to replace shotcrete as well as wire mesh. However, the development of its original production technology is highly in demand since it is not open to the public. Therefore, two kinds of powder-type TSL prototypes were developed as the first development stage. Then, their mechanical properties were experimentally compared with those of a two-component foreign TSL material including both of liquid and powder components. From a series of experiments, the first TSL prototype mixing condition satisfied every TSL performance requirements specified by EFNRAC (2008), and showed much higher tensile and bond strengths than those of the two-component foreign TSL, even though the other TSL prototype cannot be used as a support member since its elongation at break is much lower than its corresponding EFNARC (2008) performance criterion. In addition, a further study to increase the ductility of the first TSL prototype might be necessary to guarantee its higher applicability to field conditions.

• Tunnel and Underground Space
• /
• v.21 no.5
• /
• pp.349-358
• /
• 2011

This paper introduces a new P wave arrival time determination algorithm of acoustic emission (AE) suitable to identify P waves with low signal-to-noise ratio generated in rock masses around the high-level radioactive waste disposal repositories. The algorithms adopted for this paper were amplitude threshold picker, Akaike Information Criterion (AIC), two step AIC, and Hinkley criterion. The elastic waves were generated by Pencil Lead Break test on a granite sample, then mixed with white noise to make it difficult to distinguish P wave artificially. The results obtained from amplitude threshold picker, AIC, and Hinkley criterion produced relatively large error due to the low signal-to-noise ratio. On the other hand, two step AIC algorithm provided the correct results regardless of white noise so that the accuracy of source localization was more improved and could be satisfied with the error range.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.183-190
• /
• 1996

Leak-before-break(LBB) approach has been shown to be both cost and risk effective by reducing maintenance cost and occupational exposure when applied to high energy piping in nuclear power plants. For Korean Next Generation Reactor(KNGR) development, LBB is considered for the Main Steam Line(MSL) piping inside containment. Unlike the reactor coolant piping leakages which can be detected by particulate and gaseous radiation monitoring, main steam line leak detection systems must be based on principles that do not involve radioactivity. Ceramics are widely used as humidity sensor materials which can be further developed for nuclear applications. In this paper, we describe the progress in the development of ceramic humidity sensors for use with the main steam lines of KNGR.

• Journal of the Korean Institute of Educational Facilities
• /
• v.7 no.2
• /
• pp.37-45
• /
• 2000

It has been practiced that past school buildings were planned focused spacial composition of functional and aesthetic. Therefore there is little consideration of psychological consciousness for the very user-students and teachers. To be premised that residential environment has an effect on cognizing of school buildings, The purpose of this study is like that. 1. How to recognize space for Children. 2. What kinds of type on Spacial Cognition. 3. To break any agreement of Relationship Structure for Spacial Cognition between School buildings and Residential Environment, and Mechanism of its essential element of composition.