• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.739-742
• /
• 1996

Several figures representing velocity transmission from joint space to task space are analyzed and compared with each other. The figures include velocity ellipsoid derived from Jacobian matrix, scaled velocity ellipsoid derived from normalized joint velocities, polytope derived by numerical scaling, and polytopes derived by linear combinations of Jacobian column vectors. The results show that the optimal directions given by the measures are not the same and the conventional velocity ellipsoid is not good choice as optimization measure as far as the moving direction is concerned. Simulation examples for 3 d.o.f. redundant robot manipulators in 2-dimensional task space are given for comparison study.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.105-112
• /
• 1998

Regarding the measure of dexterity of robot manipulators, two geometric tools, manipulability ellipsoids and manipulability polytopes, are examined and compared with each other. Even though the manipulability ellipsoid approach is the most widely used technique, it is shown that the manipulability ellipsoid transforms the inexact joint velocity constraints into task space and so it may fail to give an exact measure of dexterity and optimal direction of motion in task space. After showing that the polytope approach can handle such problems, we propose a practical polytope method which can be applied to 3-dimensional task space in general. The relation between manipulability ellipsoids and manipulability polytopes are also explored for a redundant case and a non-redundant one.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.185-190
• /
• 2000

비선형 시스템에 대한 $Η_{\infty}$ 제어 이론은 에너지 소진(energy dissipation) 개념을 기초로 개발되어 왔다. 에너지 소진을 이용한 비선형 $Η_{\infty}$ 제어기는 외란과 성능 벡터 사이의 $L_2$게인의 비를 일정이하로 만드는 방법으로 설계되고, 그 적용을 위해서는 헤밀턴 자코비 부등식의 해를 구하는 것이 필수적이지만, 일반적으로 헤밀턴 자코비 부등식의 해를 구하는 것은 매우 어렵다. 본 논문에서는 로봇 매니퓰레이터의 운동방정식을 변형하여 헤밀턴 자코비 부등식의 해를 구하기 쉬운 형태, 즉 비선형 행렬 부등식으로 표현하고, 운동 방적식을 구성하는 행렬의 각 항들이 한계가 존재한다는 것을 이용하여 그 부등식의 근사해를 구하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.632-637
• /
• 1992

Recently many dynamics control algorithms using robot dynamic equation have been proposed. One of them, Kawato's feedback error learning scheme requires neither an accurate model nor parameter estimation and makes the robot motion closer to the desired trajectory by repeating operation. In this paper, the feedback error learning algorithm is implemented to control a robot system, 5 DOF revolute type movemaster. For this purpose, an actuator dynamic model is constructed considering equivalent robot dynamics model with respect to actuator as well as friction model. The command input acquired from the actuator dynamic model is the sum of products of unknown parameters and known functions. To compute the control algorithm, a parallel processing computer, transputer, is used and real-time computing is achieved. The experiment is done for the three major link of movemaster and its result is presented.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.745-750
• /
• 2008

Uncertain dynamic parameters and joint flexibility have been problem to control robot manipulator precisely. Hence, even if the controller tracks the desired trajectory well with the feedback of the motor encoders, it is hard to achieve the desired behavior at the end-effector. In this paper, robot trajectory is taught by a general heuristic iterative learning control (ILC) algorithm in order to reduce tracking error of the tool center point (TCP) and the results of tracking with 6 DOF industrial robot manipulator are presented. The performance is verified based on ISO 9283.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.10
• /
• pp.755-767
• /
• 2003

This paper proposes a robust fault-tolerant control framework for robot manipulators to maintain the required performance and achieve task completion in the presence of both partial joint failures and complete joint failures and uncertainties. In the case of a complete joint failure or free-swinging joint failure causing the complete loss of torque on a joint, a fully-actuated robot manipulator can be viewed as an underactuated robot manipulator. To detect and identify a complete actuator failure, an on-line fault detection operation is also presented. The proposed fault-tolerant control system contains a robust adaptive controller overcoming partial joint failures based on robust adaptive control methodology, an on-line fault detector detecting and identifying complete joint failures, and a robust adaptive controller overcoming partial and complete joint failures, and so eventually it can face and overcome joint failures and uncertainties. Numerical simulations are conducted to validate the proposed robust fault-tolerant control scheme.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.4
• /
• pp.217-226
• /
• 2014

Since the world has changed to a society of 21st century high-tech industries, the modern people have become reluctant to work in a difficult and dirty environment. Therefore, unmanned technologies through robots are being demanded. Now days, effects such as voice, control, obstacle avoidance are being suggested, and especially, voice recognition technique that enables convenient interaction between human and machines is very important. In this study, in order to conduct study on the stable motion control of the robot system that has mobile-manipulator structure and is voice command-based, kinetic interpretation and dynamic modeling of two-armed manipulator and three-wheel mobile robot were conducted. In addition, autonomous driving of three-wheel mobile robot and motion control system of two-armed manipulator were designed, and combined robot control through voice command was conducted. For the performance experiment method, driving control and simulation mock experiment of manipulator that has two-armed structure was conducted, and for experiment of combined robot motion control which is voice command-based, through driving control, motion control of two-armed manipulator, and combined control based on voice command, experiment on stable motion control of voice command-based robot system that has mobile-manipulator structure was verified.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.6
• /
• pp.307-312
• /
• 2021

This paper proposes an adaptive time-delayed control approach with the integral sliding-mode surface for the fast convergence rate of robot manipulators. Adaptive switching gain aims to guarantee the system stability in such a way as to suppress time-delayed estimation error in the proposed control approach. Moreover, it makes an effort to increase the convergence ability in reaching the phase. An integral sliding-mode surface is employed to achieve a fast convergence rate in the sliding phase. The stability of the proposed one is proved to be asymptotically stable in the Lyapunov stability. The efficiency of the proposed control approach is illustrated with a tutorial example in robot manipulator, which is compared to that of the existing control approach.

• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.5-12
• /
• 1996

In this paper, we design a Continuous Variable Structure Controller which can control robot manipulators to follow the desired planned trajectory with accuracy and robustness, and improve continuity and robustness of variable structure control, based on disturbance observer. We also analyze the stability the proposed algorithm and then verify the usefulness and performance through simulation stuies.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.263-266
• /
• 1998

This paper propose a prefilter type inverse control algorithm using chaotic neural networks. Since the chaotic neural networks show robust characteristics in approximation and adaptive learning for nonlinear dynamic system, the chaotic neural networks are suitable for controlling robotic manipulators. The structure of the proposed prefilter type controller compensate velocity of the PD controller. To estimate the proposed controller, we implemented to the Cartesian space control of three-axis PUMA robot and compared the final result with recurrent neural network(RNN) controller.