• Title/Summary/Keyword: rivers sediment

검색결과 186건 처리시간 0.021초

산림유역 개발이 하천 출구의 토사 퇴적에 미치는 영향: 일본 쿠시로습지의 연구결과 (Influence of Land Use Change in the Forest Catchment on Sediment Accumulation at the Outlets of Rivers: Results of a Study in Kushiro Mire, Northern Japan)

  • 안영상;중촌태사
    • 한국산림과학회지
    • /
    • 제98권6호
    • /
    • pp.669-675
    • /
    • 2009
  • 본 연구는 산림유역 개발이 하천 출구의 토사 퇴적에 미치는 영향을 규명하기 위해 토사 퇴적물에 함유된 세슘 농도를 분석하여 세슘총량과 토사 퇴적속도를 계산하였다. 세슘은 1954년 핵실험에 의해 최초 방출되었고, 토사의 입자에 흡착되어 퇴적하기 때문에 토사 퇴적물의 연대측정으로 이용되고 있다. 쿠시로습지유역의 대규모 산림은 1950년대 이후 농지로 개발되었고, 1954년 이후 하천 출구에서는 36~148 cm의 부유토사가 퇴적되었다. 세슘을 함유한 토사는 유역으로부터 유출되어 하천 출구에 퇴적하므로 하천 출구에서 세슘총량은 대조구보다 높은 값을 나타내었다. 또한 세슘총량은 토사 퇴적속도가 증가할수록 증가하였지만, 쿠쪼로강과 쿠시로강의 출구에서 세슘총량은 완만하게 증가하였다. 왜냐하면 쿠쪼로강과 쿠시로강에서 유로침식으로 발생한 토사는 세슘을 거의 포함하고 있지 않기 때문에 이들 하천 출구에서 토사퇴적은 증가하고 있었지만 세슘총량은 크게 증가하지 않았다.

자연하천에서 하도의 물리적 특성과 하상재료의 상관관계분석 (Analysis of Correlation on Physical Characteristics and Bed Materials in Natural Rivers)

  • 김기흥
    • 한국환경복원기술학회지
    • /
    • 제13권2호
    • /
    • pp.95-104
    • /
    • 2010
  • The purpose of this study is to analyze the correlation between physical stream characteristics and bed materials in natural rivers. Accordingly, four natural rivers were selected reference streams, they were Nam river, Sumjin River, Naesung River and Han River. Grain size distributions of bed materials were gravels, cobbles and boulders in Han river and Nam river, were sand, gravels, cobbles and boulders in Sumjin river and were sand in Naesung river. Four reference streams were divided into each two reference reaches (straight and bend) by plan and profile characteristics of naturally meandering stream. Therefore various reference reaches were chosen in the aspect of physical stream characteristics and grain size distributions. The results investigated and analyzed are as follows. The streams that grain sizes distributions of river bed materials were coarse were stable because they had variety of bed slope without sediment deposition, and then the riffles frequency and the physical characteristics were various. Also, velocitydepth regime were various in four kinds, and the response parts for water level change were small, so that channel flow status were stable and excellent condition. On the other hand, sand river that grain sizes distributions of river bed materials were fine had not the variety of parameters as velocity-depth regimes, sediment deposition, channel flow status and riffles frequency, so that the physical stream characteristics were not various.

해저 오염 퇴적층 복원 처리를 위한 BMP 패키지 기술 개발 (Development of Engineering Model for a Barge Moulted Seabed Sludge Treatment Plant)

  • 배준홍;하문근;어경해;김승혁;박찬후;김병우;구근회;윤철원
    • 한국해양공학회지
    • /
    • 제17권2호
    • /
    • pp.8-13
    • /
    • 2003
  • Soil, ground water, and sea bed are exposed to a continuous accumulation of polluted materials, causing serious environmental damage. It has been reported that such pollution causes a massive mortality of fish stock in rivers due to the resuspension of toxic chemicals, occurring during strong wind conditions. Therefore, it becomes apparent that there is an immediate demand for the restoration treatment of polluted river bed (or sea bed) sediment layers. Pollution levels of major rivers and ports, such as Paldang, Kyungan rivers, and Masan port, are becoming of great public concern, and are posing a serious environmental threat. In particular, the pollution of the Shi-hwa river has become a nation wide issue for the last few years. In spite of such public concern, the pollution levels of such rivers or ports are worsening everyday. In this study, an environmentally sound engineering package is introduced that helps to restore the polluted river bed or sea bed sediments. This engineering package consists of a suction facility, followed by a series of mechanical, chemical, and biological treatment units. The suction facility is designed to minimize secondary pollution that occurs from the resuspension of toxic materials during suction. The sea bed cleaning engineering package is designed to be installed on the top of a floating barge. Such a combination of environmental plant and shipbuilding technology provides a cost-effective solution, minimizing the transportation between suction and treatment facilities.

한국 하천의 지역별 유사특성의 군집화와 H-ADCP 기반 부유사 농도 관측 기법에의 활용 방안 (Clustering of sediment characteristics in South Korean rivers and its expanded application strategy to H-ADCP based suspended sediment concentration monitoring technique)

  • 노효섭;손근수;김동수;박용성
    • 한국수자원학회논문집
    • /
    • 제55권1호
    • /
    • pp.43-57
    • /
    • 2022
  • 유사량 계측 기술의 발달로 초음파 도플러 유속계(ADCP)의 산란도가 부유사 농도와 관계가 있다는 특성을 이용해 부유사의 농도를 짧은 시간 간격으로 계측하여 부유사 관측의 비용과 위험 문제를 극복하고자 하는 노력이 지속되고 있다. 국내에는 자동 유량 관측소에 횡방향 ADCP (H-ADCP)가 설치되어 있어 실시간으로 부유사 농도를 계측하는 기술의 적용이 가능하지만 자동 유량 관측소와 부유사 관측소의 위치가 항상 일치하지는 않아 모든 관측소에서의 모형 개발은 불가한 실정이다. 본 연구에서는 이러한 문제를 극복하기 위해 H-ADCP가 설치된 유사량 관측소 9개소에 대해 부유사 농도를 계측하는 H-ADCP-SSC 관계식을 개발하고 그 결과의 적용성에 대해 고찰하였다. 그리고 부유사 관측소별로 나타나는 특징에 대해 알아보기 위해 한국 하천의 부유사 관측소 44개소의 유역면적, 부유사와 하상토의 입도분포, 유량-유사량 관계식 등의 유사특성 자료를 이용해 비지도 기계학습 기법인 가우시안 혼합 모형(GMM)으로 군집분석을 수행하였다. 군집화 결과, 유사량 관측소를 공간적으로 구분해낼 수 있었으며, 특히 하천의 본류와 지류의 유사 특징을 구분해낼 수 있었다. 결과적으로, H-ADCP-SSC 관계식과 부유사 관측소의 군집분석 결과를 종합해 H-ADCP-SSC 관계식이 개발되지 않은 자동 유량 관측소에서 관계식을 적용하는 부유사 농도를 실시간으로 계측할 수 있도록 하는 프로토콜을 제안하였다.

Numerical analysis on erosion process of replenished sediment on rock bed

  • Takebayashi, Hiroshi;Yoshiiku, Musashi;Shiuchi, Makoto;Yamashita, Masahiro;Nakata, Yasusuke
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2011년도 학술발표회
    • /
    • pp.17-17
    • /
    • 2011
  • As a method of countermeasure to bed degradation and armoring phenomena of bed material in the downstream area of dam reservoirs, sediment augmentation (replenished sediment) has been carried out in many Japanese rivers. In general, bed of the replenished sediment site is composed of rocks, because the site is located in the downstream area of the dams and sediment supply is very small. Bed deformation process has been researched by many researchers. As a method of countermeasure to bed degradation and armoring phenomena of bed material in the downstream area of dam reservoirs, sediment augmentation (replenished sediment) has been carried out in many Japanese rivers. In general, bed of the replenished sediment site is composed of rocks, because the site is located in the downstream area of the dams and sediment supply is very small. Bed deformation process has been researched by many researchers. However, most of them can treat movable bed only and cannot be applied to the bed deformation process of sediment on rocks. If the friction angle between the sediment and the bed surface is assumed to be the same as the friction angle between the sediment and the sediment, sediment transport rate must be smaller without sediment deposition layer on the rocks. As a result, the reproduced bed geometry is affected very well. In this study, non-equilibrium transport process of non-cohesive sediment on rigid bed is introduced into the horizontal two dimensional bed deformation model and the model is applied to the erosion process of replenished sediment on rock in the Nakagawa, Japan. Here, the Japanese largest scale sediment augmentation has been performed in the Nakagawa. The results show that the amounts of the eroded sediment and the remained sediment reproduced by the developed numerical model are $56300m^3$ and $26800m^3$, respectively. On the other hand, the amounts of the eroded sediment and the remained sediment measured in the field after the floods are $56600m^3$ and $26500m^3$, respectively. The difference between the model and field data is very small. Furthermore, the bed geometry of the replenished sediment after the floods reproduced by the developed model has a good agreement with the measured bed geometry after the floods. These results indicate that the developed model is able to simulate the erosion process of replenished sediment on rocks very well. Furthermore, the erosion speed of the replenished sediment during the decreasing process of the water discharge is faster than that during the increasing process of the water discharge. The replenished sediment is eroded well, when the top of the replenished sediment is covered by the water. In general, water surface level is kept to be high during the decreasing process of the discharge during floods, because water surface level at the downstream end is high. Hence, it is considered that the high water surface level during the decreasing process of the water discharge affects on the fast erosion of the replenished sediment.

  • PDF

제주도 주변해역 대륙붕 퇴적물의 지화학적 조성과 점토광물 연구 (Clay minerals and geochemistry of continental shelf sediment around Jeju Island in the northern East China Sea)

  • 윤정수
    • 한국제4기학회지
    • /
    • 제23권1호
    • /
    • pp.25-37
    • /
    • 2009
  • 제주도 주변해역에 분포하는 퇴적물의 기원을 밝히기 위해 이곳 표층 및 주상 퇴적물의 지화학적 조성과 점토광물 분석연구를 하였다. 해양에 점토광물의 분포는 주로 퇴적물 공급지 와 해양순환 패턴에 의해 지배를 받는다. 스멕타이트는 남황해 북서쪽 지역과 외대륙붕의 니토대 분포지역에 8% 이상의 높은 함량분포를 보이는데, 이는 세립질 부유퇴적물을 많이 함유한 중국의 황하강계로부터 주로 공급되고 있음을 의미한다. 비교적 높은 함량의 고령토는 북동쪽의 연안역과 양자강 하구역에 가까운 남서쪽 지역에 분포하는데 이는 양자강과 한국의 강들로부터 공급된 것으로 보인다. $^{210}Pb$ 동위원소를 이용한 제주도 주변해역의 퇴적율은 0.20~0.54cm/yr 혹은 $0.15{\sim}0.42g/cm^2{\cdot}yr^{-1}$의 범위를 보였고 서쪽에서 동쪽을 향함에 따라 퇴적율이 점차 감소하는 경향을 보이는데, 이는 황하와 양자강 기원 부유퇴적물이 제주도 주변해역까지 이동되고 있음을 의미한다. 지화학적 구분지수 도표에서 제주도 주변해역은 중국의 강들 중 황하강기원 퇴적물이 주를 이루나 북동쪽 지역은 한국의 강과 제주 기원 퇴적물이 일부 분포하고 있다.

  • PDF

댐하류 조절하천의 자연성 회복을 위한 하천 유사환원 연구 고찰 (A review on sediment replenishment to river channel for natural recovery of regulated rivers below large dams)

  • 옥기영;장창래;김범철;최미경
    • 한국수자원학회논문집
    • /
    • 제52권spc2호
    • /
    • pp.835-844
    • /
    • 2019
  • 본 연구는 댐에 의해 유사공급이 제한되는 댐하류 하천에서 자연성 회복을 위한 근본적 방안으로서 댐 건설 후 감소된 유사의 공급과 이송능력을 회복하기 위하여 인공적으로 하천에 모래와 자갈과 같은 토사를 공급하는 하천 유사환원 연구 기술을 체계적으로 고찰하였다. 유사환원의 목적을 초기의 수질 개선과 어류의 인공산란처 조성에서부터, 이후 저수지 퇴사대책, 하천구조물 안전성 유지, 그리고 최근의 하천의 지형형성 과정 회복까지 다섯 개로 구분하여 제시하였으며, 이러한 사업 목적에 따른 공급토사의 크기, 공급량, 현장에서 적용되는 공급방법과 모니터링 방안을 국내외 연구사례를 들어 체계적으로 고찰하였다. 앞으로 국내 하천관리에서 환경유량과 유사환원이 연계된 통합 하천관리 기술발전에 기여하기를 기대한다.

하천 및 호소 내 퇴적물 재부유에 따른 중금속 및 영양염류 용출량 평가기법 동향 (Trends in Evaluation Techniques for Leaching of Heavy Metals and Nutrients according to Sediment Resuspension in Rivers and Lakes)

  • 윤상규;한서연;김해욱;곽인실;안진성
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제28권5호
    • /
    • pp.1-11
    • /
    • 2023
  • The phenomenon of sediment resuspension in rivers and lakes causes contaminants (heavy metals and nutrients) accumulated in the sediment to leach into the overlying water. As a result, it can lead to changes in toxic effects and eutrophication in the aquatic ecosystem. In this regard, it is important to quantitatively determine the amount of contaminants leached during sediment resuspension. In this study, methods for assessing the amount of released contaminants and the types of contaminants potentially released due to sediment resuspension were studied and summarized. Methods for assessing leaching can be divided into three groups based on the principle of causing resuspension: (i) the oscillating grid chamber method, (ii) the mechanical stirrer method, and (iii) the shaker method. It was confirmed that the types of contaminants that can potentially be released include heavy metals bound to sulfides, as well as exchangeable and labile forms of heavy metals and nutrients. To effectively manage stable aquatic ecosystems in the future, a simplified leaching test method is needed to assess in advance the risks (i.e., changes in toxic effects and eutrophication) that sediment resuspension may pose to aquatic ecosystems.