• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.63-76
• /
• 2017

This thesis provides background information on DFS carried out by the government in an effort to reduce the accident rate, cases of DFS in other advanced countries to study their risk detection, risk assessment, risk control measures, and cases in which application of DFS during the designing phase succesfully led to reduction of the accident rate. Till now, the focus has been on incident responses after the occurance of accidents, it describes the importance of considering safety during the desining process through safety results and cases.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.2
• /
• pp.39-46
• /
• 2020

This paper recognizes the risk of ignition of air fryer (machine that can cook fried dishes with hot air without oil) that is far exceeding the sales rate of microwave ovens, which is necessary to modern household kitchen, and identifies fire risk through the operation principle of the process of heat transfer, and the main structure of the machine. The fire test that we conducted is to observe the risk of ignition of the machine due to the damage to the safety system and the possibility of igniting oil paper along with food, to experiment with the possibility of ignition due to blockage of the exhaust due to obstacles, and accumulation of oil stains on the hot wire, and to present the method of fire control and devise countermeasures.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.653-660
• /
• 2022

In liquid hydrogen storage tanks, tank damage or leakage in the surrounding pipes possess a major risk. Since these tanks store huge amounts of the fluid among all the liquid hydrogen process facilities, there is a high risk of leakage-related accidents. Therefore, in this study, we conducted a risk assessment of liquid hydrogen leakage for a grid-type liquid hydrogen storage tank (lattice-type pressure vessel (LPV): 18 m³) that overcame the low space efficiency of the existing pressure vessel shape. Through a commercially developed three-dimensional computational fluid dynamics program, the geometry of the site, where the liquid hydrogen storage tank will be installed, was obtained and simulations of the leakage scenarios for each situation were performed. From the computational flow analysis results, the pool formation behavior in the event of liquid hydrogen leakage was identified, and the resulting damage range was predicted.

• 대한예방의학회:학술대회논문집
• /
• 1994.02a
• /
• pp.426-430
• /
• 1994

The assessment of exposure is an important component of the risk assessment process. Exposure information is used in risk assessment in at least two ways: 1) in the identification of hazards and the epidemiologic research investigating exposure-response relationships and 2) in the development of population exposure estimates. In both of these cases, the value of a chemical risk assessment is enhanced by improvements in the quality of exposure assessments. The optimum exposure assessment is the direct measurement of population exposure; however, such measurements are rarely available. Recent developments in methods for exposure assessment allow estimates to be made that are valid representations of actual exposure. The use of these exposure estimates to classify exposures correctly enhances the likelihood that causal associations between exposure and response will be correctly identified and that population risks will be accurately assessed.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.107-110
• /
• 2011

The key role in safety management is to identify any possible hazard before it occurs by identifying any possible risk factors which are critical to risk assessment. This planning/assessment process is considered to be tedious and requires a lot of attention due to the following reasons: firstly, falsework (temporary structures) in construction projects is fundamentally important. However, the installation and dismantling of those facilities are one of the high risk activities in the job sites. Secondly, temporary facilities are generally not clearly delineated on the building drawings. It is our strong belief that safety tools have to be simple and convenient enough for the jobsite people to manage them easily and be flexible for any occasions to be occurred at various degrees. In order to develop the safety assessment system, this research utilizes the BIM technology and collects important information by importing data from BIM models and use it in the planning stage.

• Structural Engineering and Mechanics
• /
• v.92 no.2
• /
• pp.197-206
• /
• 2024

In this study, a unified framework that integrates pre- and post-earthquake assessments of buildings was proposed to enhance urban disaster preparedness through the coordination of pre- and post- earthquake efforts. Within this framework, a case study based on the 2023 Kahramanmaraş Earthquake was performed comparing the distribution of seismic risk prioritization for 117 reinforced concrete buildings with their actual damage states observed during post-earthquake field inspections. In order to conduct pre-earthquake evaluation process, street-level images were employed using two different rapid visual screening methods. With the use of generated geospatial database enabling the efficient and reliable transmission of the data between both stages of the assessment procedures, the alignment and validation of pre- and post-earthquake evaluations of the buildings were achieved enhancing the coordination of seismic risk management strategies. By implementing the proposed joint framework in this study, an extensive seismic vulnerability evaluation on an urban scale could be achieved by optimizing the computational demands, cost and time required for the strategic planning activities.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.3
• /
• pp.185-191
• /
• 2018

Post-earthquake risk assessment technique in Korea is developed in 2013 by National Disaster Management Research Institute, at the same time, related manual and standard regulation is distributed to every local government by National Emergency Management Agency. The objectives of this research are to investigate and evaluate the post-earthquake risk assessment of 9.12 Earthquake (M5.8, Gyeongju City, 2016) and 11.15 Earthquake (M5.4, Pohang City, 2017). To suggest and improve the assessment process of post-earthquake risk, first post-earthquake risk assessment method of advanced foreign countries including US, New Zealand and Japan are compared, and post-earthquake evaluation activities in 9.12 Earthquake and 11.15 Earthquake are analyzed. From the results, it is needed to expand the adapted building and structure types and strengthen the earthquake disaster response capacity of local government.

• Journal of Science and Technology Studies
• /
• v.3 no.1 s.5
• /
• pp.75-103
• /
• 2003

The technological risk has two major aspects. The one is technological aspect of the risk which consists of rules of nature and rational behaviors of humans. The other is social aspect of risk which consists of human values and nonrational and emotional behaviors of humans. So the technological risks should be called and treated as the technological and social risks. Because of these, not only technological professionals but also public people should have the chance to participate in the management of technological risks.

• Journal of the Korean association of regional geographers
• /
• v.8 no.2
• /
• pp.247-255
• /
• 2002

In recent decades, the characteristics of natural hazard has been changed and the global cost of natural disasters has increased substantially. There are several trends in society and nature that suggest this pattern may continue, with more frequent mega-disasters occurring in the future. In particular, risk perception that is at odds with the "real" risk underlies the process of risk transference increases long-term vulnerability. Therefore investigating the correct risk transference and adjustments according to regional socio-economic structure can mitigate and reduce environmental, so called man-made hazard.

• Journal of Navigation and Port Research
• /
• v.33 no.4
• /
• pp.255-261
• /
• 2009

Prediction of the stability for ships is very complex in reality. In this paper, risk based approach is applied to predict the probability of capsize for a certified ship, which is effected by the forces of sea especially the wave loading Safety assessment and risk analysis process are also applied for the probabilistic prediction of stability for ships. The probability of shipsencountering different waves at sea is calculated by the existed statistics data and risk based models. Finally, ship capsizing probability is calculated according to single degree of freedom(SDF) rolling differential equation and basin erosion theory of nonlinear dynamics. Calculation results show that the survival probabilities of ship excited by the forces of the seas, especially in the beam seas status, can be predicted by the risk based method.