• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.103-111
• /
• 2021

In modern society, digital lifestyles are spreading to minimize contact with people and to receive contactless information. The spread trend has established an unmanned distribution system in which transactions through contactless technologies such as kiosks and chatbots are activated in face-to-face transactions with sellers and consumers. In order to streamline logistics supply worldwide, digital new deal based joint logistics hubs, unmanned courier storage platforms, and fresh logistics based last mile services have been developed into unmanned logistics systems, focusing on the intelligent logistics system automation process. Unmanned courier storage system installed in urban areas and home to daily logistics where volume is concentrated are provided with fresh logistics services through cold chain and receiving freights in contactless environments. Development is also underway to minimize safety accidents caused by courier services, such as managing various information based on the integrated control system. This paper defines the concept of integrated operation for the development of a platform for contactless unmanned courier storage device developed into next-generation logistics system. In addition, we intend to develop systems engineering-based output for deriving safety requirements and specifications by identifying risk sources that may occur in the operational scenario. Therefore, the goal is to establish a foundation for safety and reliability between interfaces of logistics systems to be installed in apartment and subway station environments that want to provide unmanned logistics services to various consumers.

• Journal of Radiation Protection and Research
• /
• v.46 no.1
• /
• pp.1-7
• /
• 2021

Background: The use of computed tomography (CT) device has increased in the past few decades in Japan. Dose optimization is strongly required in pediatric CT examinations, since there is concern that an unreasonably excessive medical radiation exposure might increase the risk of brain cancer and leukemia. To accelerate the process of dose optimization, continual assessment of the dose levels in actual hospitals and medical facilities is necessary. This study presents organ dose estimation using pediatric cerebral CT scans in the Kyushu region, Japan in 2012 and the web-based calculator, WAZA-ARI (https://waza-ari.nirs.qst.go.jp). Materials and Methods: We collected actual patient information and CT scan parameters from hospitals and medical facilities with more than 200 beds that perform pediatric CT in the Kyushu region, Japan through a questionnaire survey. To estimate the actual organ dose (brain dose, bone marrow dose, thyroid dose, lens dose), we divided the pediatric population into five age groups (0, 1, 5, 10, 15) based on body size, and inputted CT scan parameters into WAZA-ARI. Results and Discussion: Organ doses for each age group were obtained using WAZA-ARI. The brain dose, thyroid dose, and lens dose were the highest in the Age 0 group among the age groups, and the bone marrow and thyroid doses tended to decrease with increasing age groups. All organ doses showed differences among facilities, and this tendency was remarkable in the young group, especially in the Age 0 group. This study confirmed a difference of more than 10-fold in organ doses depending on the facility and CT scan parameters, even when the same CT device was used in the same age group. Conclusion: This study indicated that organ doses varied widely by age group, and also suggested that CT scan parameters are not optimized for children in some hospitals and medical facilities.

• (The) Korean Journal of Educational Psychology
• /
• v.31 no.2
• /
• pp.265-282
• /
• 2017

The purpose of this study was to applicate systematic RTI educational service by providing reading fluency program to identify high-risk students with dyslexia of a shadow zone based on their growth rate. Twenty-two students of 1st to 5th graders were selected as study subjects through "2016 Kyungi-Do Project of the Dyslexia Excellence Program". An individualized reading fluency program was provided through 8-10 sessions over a period of 3 months. The program was developed based on evidence-based reading strategies with the consideration of each student's educational needs. As results, three groups were identified with their learning growth rates: concerned, improving, and discrepancy groups. The study identified three students in a discrepancy group as students with dyslexia. Based on these results, implications and suggestions for further educational identification process along with effect programs were discussed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.4
• /
• pp.115-124
• /
• 2011

There has been significant research in security technology such as e-passport standards, as e-passports have been introduced internationally. E-passports combine the latest security technologies such as smart card, public key infrastructure, and biometric recognition, so that these technologies can prevent unauthorized copies and counterfeits. Biometric information stored in e-passports is the most sensitive personal information, and it is expected to bring the highest risk of damages in case of its forgery or duplication. The present e-passport standards cannot handle security features that verify whether its biometric information is copied or not. In this paper, we propose an e-passport security technology in which biometric watermarking is used to prevent the copy of biometric information in the e-passport. The proposed method, biometric watermarking, embeds the invisible date of acquisition into the original data during the e-passport issuing process so that the human visual system cannot perceive its invisibly watermarked information. Then the biometric sample, having its unauthorized copy, is retrieved at the moment of reading the e-passport from the issuing database. The previous e-passport security technology placed an emphasis on both access control readers and anti-cloning chip features, and it is expected that the proposed feature, copy protection of biometric information, will be demanded as the cases of biometric recognition to verify personal identity information has increased.

• Journal of the Korean Magnetic Resonance Society
• /
• v.24 no.4
• /
• pp.104-116
• /
• 2020

Fipronil, the phenylpyrazole insecticide, is effective and used in various fields. Especially, fipronil was reliable because it was known to be specific on invertebrate animals than vertebrate animals including mammals. However, fipronil had potential risks that affect vertebrate animals as it blocks the gamma-aminobutyric acid (GABA) receptors that also exists in vertebrates as well as invertebrates. Therefore, it was necessary that harmful effects of fipronil on vertebrates are clarified. For this purpose, the zebrafish (Danio rerio) were used on behalf of vertebrate animals in present study. The zebrafish were exposed to 5 ㎍/L, 25 ㎍/L, and 50 ㎍/L of fipronil during 12, 24 and 72 hours. To closely observe toxic process, 12 hours and 24 hours of additional time point were set in the exposure test. Nuclear magnetic resonance (NMR)-based metabolomics is an approach to detect metabolic changes in organism resulted from external stimuli. In this study, NMR-based metabolomics showed the metabolic changes in zebrafish caused by fipronil exposure. Metabolic analysis revealed that fipronil interfered with energy metabolism and decreased the antioxidant ability in zebrafish. Antioxidant ability decline was remarkable at high exposure concentration. In addition, metabolic analysis results over time suggested that reactions for alleviating the excessive nerve excitation occurred in zebrafish after fipronil exposure. Through this study, it was elucidated that the adverse effects of fipronil on vertebrate animals are evident. The risk of fipronil on vertebrates can be no longer ignored. Moreover, this study has a meaning of practically necessary research for organism by examining the effects of fipronil at low concentrations existed in real environment.

• Journal of the Korean Society of Safety
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2021

To simulate a process model in the field of chemical engineering, it is very important to identify the physical properties of novel materials as well as existing materials. However, it is difficult to measure the physical properties throughout a set of experiments due to the potential risk and cost. To address this, this study aims to develop a property prediction model based on the group contribution method for aromatic chemical compounds including benzene rings. The benzene rings of aromatic materials have a significant impact on their physical properties. To establish the prediction model, 42 important functional groups that determine the physical properties are considered, and the total numbers of functional groups on 147 aromatic chemical compounds are counted to prepare a dataset. Support vector regression is employed to prepare a prediction model to handle sparse and high-dimensional data. To verify the efficacy of this study, the results of this study are compared with those of previous studies. Despite the different datasets in the previous studies, the comparison indicated the enhanced performance in this study. Moreover, there are few reports on predicting the physical properties of aromatic compounds. This study can provide an effective method to estimate the physical properties of unknown chemical compounds and contribute toward reducing the experimental efforts for measuring physical properties.

• Journal of the Korean Society of Safety
• /
• v.35 no.6
• /
• pp.85-92
• /
• 2020

Wet Scrubber reacts the incoming pollutant gas with cleaning water (water + absorbent) to absorb pollutants and release the clean air to the atmosphere. Wet scrubbers and packed tower scrubbers using this principle are widely used in businesses that emit acid gases. In particular, in the etching process using hydrochloric acid (HCl), alkaline washing water (NaOH) having a pH of about 8 to 11 is used to absorb a large amount of acid gas. However, These salts are attached to the injection nozzle (nozzle), filling material (packing), and the demister (Demister), causing air pollution, human damage, and inoperability due to clogging and acid gas discharge. Therefore, In this study, an improvement plan was proposed to manage the washing water with pH 3~4 acidic washing water. The test method takes samples from the Wet Scrubber flue measurement laboratory twice a month for 1 year. Hydrogen chloride (HCl) concentration (ppm) was measured, and nozzle clogging and scale conditions were measured, compared, and analyzed through a differential pressure gauge and a pressure gauge. As a result of the check, it was visually confirmed that the scale was reduced to 50% or less in the spray nozzle, filler, and demister. In addition, the emission limit of hydrogen chloride in accordance with the Enforcement Regulation of the Air Quality Conservation Act [Annex 8] met 3 ppm or less. Therefore, even if the washing water is operated in an acidic pH range of 3 to 4, it is expected to reduce air pollution and human damage due to clogging of internal parts, and it is expected to reduce maintenance costs such as regular cleaning or replacement of parts.

• The Journal of Bigdata
• /
• v.5 no.2
• /
• pp.69-76
• /
• 2020

This study was conducted with the support of the Information and Communication Technology Promotion Center, funded by the government (Ministry of Science and ICT) in 2019. Highly pathogenic avian influenza (HPAI) is an acute infectious disease of birds caused by highly pathogenic avian influenza virus infection, causing serious damage to poultry such as chickens and ducks. High pathogenic avian influenza (HPAI) is caused by focusing on winter rather than year-round, and sometimes does not occur at all during a certain period of time. Due to these characteristics of HPAI, there is a problem that does not accumulate enough actual data. In this paper study, GAN network was utilized to generate actual similar data containing missing values and the process is introduced. The results of this study can be used to measure risk by generating realistic simulation data for certain times when HPAI did not occur.

• Convergence Security Journal
• /
• v.20 no.5
• /
• pp.53-63
• /
• 2020

In accordance with the revision of the Data 3 Act, such as the Personal Information Protection Act, it is possible to process pseudonym information without the consent of the information subject for statistical creation, scientific research, and preservation of public records, and unlike personal information, it is legal for personal information leakage notification and personal information destruction There are exceptions. It is necessary to revise the pseudonym information in that the standard for the pseudonym processing differs by country and the identification guidelines and anonymization are identified in the guidelines for non-identification of personal information in Korea. In this paper, we focus on the use of personal information in accordance with the 4th Industrial Revolution, examine the concept of pseudonym information for safe use of newly introduced pseudonym information, and generate / use / provide / destroy domestic and foreign non-identification measures standards and pseudonym information. At this stage, through the review of the main contents of the law or the enforcement ordinance (draft), I would like to make suggestions on future management / technical protection measures.

• Korean Journal of Veterinary Service
• /
• v.44 no.1
• /
• pp.51-59
• /
• 2021

Various infectious diseases have threatened swine industries in Korea. One of the major risk factors of disease spread is livestock transport vehicle. For this reason, all abattoirs are required by law to have vehicle washing and disinfection facilities. However, detailed guidelines for cleaning and disinfection procedures were not provided. So in this study, assessment by visual observation was conducted to evaluate how well the cleaning and disinfection procedures of livestock transport vehicles have been performed in four different abattoirs in Jeonbuk, Korea. The observation included length of car washing time, the number of washing bay, type of washperson, type of disinfectant application, length of disinfection time, and compliance of driver's hygienic procedure. Every vehicle in all abattoirs conducted washing and disinfection procedure. However, there were procedural differences for each abattoirs and defects in the washing and disinfection procedures. In addition to that, the compliance of driver's hygienic procedure was not sufficient. Hence, detailed manuals on washing and disinfection procedures for involved people are required and it is necessary to establish an inspection and evaluation system.