• Title/Summary/Keyword: ring theory

Search Result 293, Processing Time 0.027 seconds

The Stability of the Flexible Rotor Mounted on Circumferentially Grooved Floating Ring Journal Bearings (원주방향 급유홈 프로팅링 저널베어링으로 지지된 탄성 회전체의 안정성)

  • 정연민;김경웅
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.16 no.12
    • /
    • pp.2205-2215
    • /
    • 1992
  • The stability of the flexible rotor mounted on circumferentially grooved floating ring journal bearings was investigated theoretically and experimentally. The floating ring journal bearing was analyzed by using JFO reformation boundary condition. The flexible shaft was analyzed by the finite element method based on Rayleigh beam theory. It was found that the measured ring speed agrees well with the theoretical results. The instability of the system due to not only the outer film but also the inner film of the bearing could be predicted by the theory which allows negative vapor pressure. The tendency that reducing the supply pressure of lubricant stabilizes the system was observed both experimentally and theoretically.

SYNCHRONIZATION OF UNIDIRECTIONAL RING STRUCTURED IDENTICAL FITZHUGH-NAGUMO NETWORK UNDER IONIC AND EXTERNAL ELECTRICAL STIMULATIONS

  • Ibrahim, Malik Muhammad;Jung, Il Hyo
    • East Asian mathematical journal
    • /
    • v.36 no.5
    • /
    • pp.547-554
    • /
    • 2020
  • Synchronization of unidirectional identical FitzHugh-Nagumo systems coupled in a ring structure under ionic and external electrical stimulations is investigated. In this network, each neuron is only connected and transmit signals to its next neuron via synaptic strength called gapjunctions. Adaptive control theory and Lyapunov stability theory are used to propose a unique control scheme with necessary and sufficient conditions which guarantee the synchronization of the neuronal network. Finally, the effectiveness of the proposed scheme is shown through numerical simulations.

A NOTE ON THE VALUATION

  • Park, Joong-Soo
    • The Pure and Applied Mathematics
    • /
    • v.1 no.1
    • /
    • pp.7-11
    • /
    • 1994
  • Classically, valuation theory is closely related to the theory of divisors and conversely. If D is a Dedekined ring and K is its quotient field, then we can clearly construct the theory of divisors on D (or K), and then we can induce all the valuations on K ([3]). In particular, if K is a number field and A is the ring of algebraic integers, then since Z is Dedekind, A is a Dedekind rign and K is the field of fractions of A.(omitted)

  • PDF

NILPOTENT-DUO PROPERTY ON POWERS

  • Kim, Dong Hwa
    • Communications of the Korean Mathematical Society
    • /
    • v.33 no.4
    • /
    • pp.1103-1112
    • /
    • 2018
  • We study the structure of a generalization of right nilpotent-duo rings in relation with powers of elements. Such a ring property is said to be weakly right nilpotent-duo. We find connections between weakly right nilpotent-duo and weakly right duo rings, in several algebraic situations which have roles in ring theory. We also observe properties of weakly right nilpotent-duo rings in relation with their subrings and extensions.

Vibration Analysis of Ring Stiffened Cylindrical Shells with a Rectangular Cutout (사각개구부를 갖는 링보강 원통셸의 진동해석)

  • Kim, Yeong-Wan;Lee, Yeong-Sin
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.23 no.11 s.170
    • /
    • pp.2040-2049
    • /
    • 1999
  • The Rayleigh-Ritz method is used to investigate the natural frequencies and mode shapes of the ring stiffened cylindrical shells with a rectangular cutout. The cutout is located on the center of the shell. The Love's thin shell theory combined with the discrete stiffener theory is adopted to formulate the analytical model of the shell. The effect of stiffener eccentricity, number, and position on vibration characteristics of the shell is examined. Also the effect of cutout size is examined. By comparison with previously published analytical and new FEM results, it is shown that natural frequencies and mode shapes can be determined with adequate accuracy.

SYMMETRY OVER CENTERS

  • KIM, DONG HWA;LEE, YANG;SUNG, HYO JIN;YUN, SANG JO
    • Honam Mathematical Journal
    • /
    • v.37 no.4
    • /
    • pp.377-386
    • /
    • 2015
  • The symmetric ring property was due to Lambek and provided many useful results in relation with noncommutative ring theory. In this note we consider this property over centers, introducing symmetric-over-center. It is shown that symmetric and symmetric-over-center are independent of each other. The structure of symmetric-over-center ring is studied in relation to various radicals of polynomial rings.

Bipolar fuzzy ideals of Near Rings

  • Baik, Hyoung-Gu
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.22 no.3
    • /
    • pp.394-398
    • /
    • 2012
  • Based on the theory of a bipolar fuzzy set, the notion of a bipolar fuzzy subring/ideal of a Near ring is introduced and related properties are investigated. Characterizations of a bipolar fuzzy subnear ring and a bipolar fuzzy ideal in near ring are established. Relations between a bipolar fuzzy ideal and a level cut are discussed. Using bipolar fuzzy ideals, we discuss characterizations of Noetherian Near ring.

A Study on Cylinder Bore Wear during Engine Durability Test (엔진 내구시험 시 실린더 보아의 마모에 관한 연구)

  • Chun Sang-Myung
    • Tribology and Lubricants
    • /
    • v.22 no.3
    • /
    • pp.131-136
    • /
    • 2006
  • Cylinder bore wear may not be a problem in most current automotive engines. However, a small change in cylinder bore diameter can significantly affect the lubrication characteristics and ring axial motion. This in turn can cause to change inter-ring pressure, blow-by and oil consumption in an engine. Therefore, by predicting the wear of piston ring face, ring groove and cylinder bore altogether, the changed ring end gap and the changed volume of gas reservoir can be calculated. Then the excessive oil consumption can be predicted. Being based on the calculation of gas flow amount by the theory of piston ring dynamics and gas flow, and the calculation of oil film thickness and friction force by the analysis of piston ring lubrication, the calculation theory of oil amount through top ring gap into combustion chamber will be set. This is estimated as engine oil consumption. Furthermore, the wear theories of ring, groove and cylinder bore are included. Then the each amount of wear is to be obtained. The changed oil consumption caused by the new end gap and the new volume of oil reservoir around second land, can be calculated at some engine running interval. Meanwhile, the wear amount and oil consumption occurred during engine durability cycle are compared with the calculated values. Next, the calculated amount of oil consumption and wear are compared with the guideline of each pare0s wear and oil consumption. So, the timing of part repair and engine life cycle can be predicted in advance without performing engine durability test. The wear data of cylinder bore diameter are obtained from three engines before and after engine durability test. The calculated wear data of cylinder bore diameter are turn out to be twice of the lower bound of averaged test values at TDC and the lower bound at BDC.

INDEPENDENTLY GENERATED MODULES

  • Kosan, Muhammet Tamer;Ozdin, Tufan
    • Bulletin of the Korean Mathematical Society
    • /
    • v.46 no.5
    • /
    • pp.867-871
    • /
    • 2009
  • A module M over a ring R is said to satisfy (P) if every generating set of M contains an independent generating set. The following results are proved; (1) Let $\tau$ = ($\mathbb{T}_\tau,\;\mathbb{F}_\tau$) be a hereditary torsion theory such that $\mathbb{T}_\tau$ $\neq$ Mod-R. Then every $\tau$-torsionfree R-module satisfies (P) if and only if S = R/$\tau$(R) is a division ring. (2) Let $\mathcal{K}$ be a hereditary pre-torsion class of modules. Then every module in $\mathcal{K}$ satisfies (P) if and only if either $\mathcal{K}$ = {0} or S = R/$Soc_\mathcal{K}$(R) is a division ring, where $Soc_\mathcal{K}$(R) = $\cap${I 4\leq$ $R_R$ : R/I$\in\mathcal{K}$}.

INDUCED HOPF CORING STRUCTURES

  • Saramago, Rui Miguel
    • Journal of the Korean Mathematical Society
    • /
    • v.48 no.3
    • /
    • pp.627-639
    • /
    • 2011
  • Hopf corings are dened in this work as coring objects in the category of algebras over a commutative ring R. Using the Dieudonn$\'{e}$ equivalences from [7] and [19], one can associate coring structures built from the Hopf algebra $F_p[x_0,x_1,{\ldots}]$, p a prime, with Hopf ring structures with same underlying connected Hopf algebra. We have that $F_p[x_0,x_1,{\ldots}]$ coring structures classify thus Hopf ring structures for a given Hopf algebra. These methods are applied to dene new ring products in the Hopf algebras underlying known Hopf rings that come from connective Morava ${\kappa}$-theory.