• 한국철도학회논문집
• /
• 제18권3호
• /
• pp.203-211
• /
• 2015

차량의 승차감은 차체의 성능 뿐만 아니라 궤도의 특성에 의해서도 영향을 받게 되므로, 궤도선형 및 궤도틀림의 관리를 위하여 차량의 승차감 평가결과를 이용한다. 본 논문에서는 차체의 진동가속도 계측데이터를 이용하여 궤도유지보수와 상관성이 있는 Continuous comfort 승차감 평가방법을 통해 국내 경부고속철도노선 및 유럽 고속철도노선에 대한 승차감 평가를 수행하였다. 승차감 평가결과를 속도대역 별로 구분하여 국내외 고속철도노선의 승차감 분포현황을 정량적으로 분석하고 승차감 수준을 비교하였다. 국내의 경부고속철도의 승차감이 유럽 고속철도노선에 비하여 다소 우수한 것으로 평가되었으며, 이를 통해 국내 고속선의 궤도선형 및 궤도틀림의 관리가 적절하게 수행되고 있음을 유추할 수 있었다.

• 한국철도학회논문집
• /
• 제7권4호
• /
• pp.332-338
• /
• 2004

The two projects about the high speed train have been performed in Korea, one project is the commercial run of high speed train(KTX) from Seoul to Busan and the other is the development of original high speed train(HSR 350x). As the successful results, the service run of KTX had been launched on the 1st of April, 2004 and HSR 350x had been fabricated in June, 2002 and has been tested in the Kyoungbu line and Honam line since then. The railway has the track irregularities which cause vibrations, such as rail joints, turnout, level crossing, transition curves and super-elevation ramps, and variations in the track level(z-axis) and the gauge(y-axis). Generally, the ride comfort for railway is evaluated by using the vibrations. In this paper, the ride comfort indices according to mc 513R and ISO 10056 have been reviewed when the high-speed trains are operated on both Kyoungbu line and Honam line. Also, the ride characteristics for KTX and HSR 350x on the high speed line and the conventional line have been analyzed and evaluated. The results show that the high-speed train has no problem from the viewpoint of the comfort ride on the high speed line and the conventional line and the ride index for HSR 350x is same as that for KTX in the high speed(300 km/h).

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.65-73
• /
• 2015

The ride quality has become a key component of not only design but car selling as the technology developed and the requirement of passengers grew up. Thus car industry invests lots of time and cost for the higher ride quality. The evaluation of the ride quality mainly is expressed by subjective element that drivers felt. In this paper, instead of the original transfer path analysis method, relatively new methods such as OPAX(Operational path analysis with eXogeneous inputs) and OTPA(operational transfer path analysis) are used for analyzing the main hindrance element of ride quality. With those new method, contribution rate of all paths that the vibration propagate along analyzed after driving test on the roads having different characteristic. The comprehensive hindrance elements of ride quality are deduced from the contribution rate and the improve experiment by changing one of hindrance elements for higher ride quality.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.81-82
• /
• 2016

본 논문에서는 미국의 분산전원 연계용 PCS에 적용되는 Grid Code인 IEEE1547 Amendment의 fault ride-through에 대해 기술한다. IEEE 1547은 2014년 Amendment가 발행되었으며, 전압/주파수에 대한 사고판단 능력이 업데이트 되어 fault ride-through의 범위가 변경되었다. 개정된 IEEE1547a의 기준을 분석하고, 이를 적용한 fault ride-through 기능을 PSIM 시뮬레이션을 통하여 검증하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.91-96
• /
• 2001

When it is considered that many vehicle rides on the road and ride quality is an important method to evaluate vehicle performance with handling, running-over-bump manoeuvre may be suitable for testing ride quality. In this paper, a computed model has roughly steering system and lumped mass, connected by joint each rigid body, and suspension that has beam elements and has shock absorber as force element to represent nonlinear characteristics. A computer simulations for passing over a bump were made with two velocities. One side of vehicle passed over bump in due consideration of driver's habit that driver is subject to avoid a bad ride quality. On simulation, vertical acceleration, pitch angle and roll angle were measured at the mass center of chassis each case.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 추계 종합학술대회 논문집
• /
• pp.489-492
• /
• 2004

인공 지능체의 감정을 표현하는 기법으로 제안된 RIDE(Robot Intelligence with Digital Emotion) 감정 표현 기법은 기존의 James-Lange 이론과 Cannon-Bard 이론을 모두 수용하며 Schafter-Singer 이론에서 제기된 감정의 연상 작용을 가능하도록 하는 감정의 기억을 수용하는 모델이다. 또한, 감정 간의 유사성과 상대성을 규정하여 인공 지능체 간의 감정 교류가 가능하도록 되어 있다.

• 한국철도학회논문집
• /
• 제5권1호
• /
• pp.40-47
• /
• 2002

In this study, and analytical method for ride sensitivity analysis of a train with non-linear suspension elements are proposed. Non-linear characteristics of springs and dampers for primary and secondary suspensions of a train are parameterized using polynomial interpolation. Vertical dynamic model of a three-body train running on straight rail with the predetermined roughness expressed in terms of spectral density function is set up and its equations of motion for ride analysis are derived. Using the direct differentiation method, sensitivity equations of the vertical dynamic model with respect to design parameters associated with non-linearity of suspensions are obtained. Based on the sensitivity analysis, improvement of ride is achieved by varying appropriate suspension parameters.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1000-1005
• /
• 2010

Ride comfort is an important factor for the development of a high-speed train. The aerodynamic force to a high speed train inside tunnels increases the car-body vibration and makes its ride comfort worse. In this study, the aerodynamic force is estimated through a CFD analysis using ADINA, and its car-body vibration and ride comfort are calculated for the aerodynamic force which acts on the side of the train. The numerical results show that the vibration is a lateral mode of the car-body and decreases the ride comfort. On the basis of this numerical simulation, more accurate simulation is necessary for the shape of tunnel and the lateral suspension system of a high speed train.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.450-454
• /
• 2001

The aim of the study is to develope an objective index for the evaluation of vehicle ride comfort using the measured vehicle accelerations. The equation of the index was derived from the correlation analysis of subjective ratings on selected vehicles and the reduced measure of the vehicle motions. First whole procedure of from the measurements to the calculation of the perceptual vibration was developed. Test condition of both the vehicle speed and the road condition was selected so as to maximize the reliability of the index. This paper suggested the equation of the objective ride index on vibration harshness, of which expected error is about 0.3 in 10 scale of subjective rating at 95％ of the significance level.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2179-2184
• /
• 2008

The ride comfort is more important according to train speedup. Generally it is defined as the vehicle vibration. There are many studies on evaluation method of ride comfort for railway. But the ride comfort for Korean high speed train(HSR 350x) has been assessed by statistical method according to UIC 513R. In this paper, the ride indices, which are measured in the Korean high speed train, have been analyzed and reviewed by appling the statistical methodology such as t-test, variance analysis(ANOVA) and regression analysis.