• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.242-250
• /
• 2022

Here we aimed to date the year and season of the resin collection from Korean red pines at Worak mountain and investigate the natural healing ability of the wounds using the tree-ring analysis technique. We determined the dating of the resin collection based on the synchronization between the ring-width time series from the wound surface of the experimental trees and the local master chronology, which is the mean time series from the sound surface on the opposite side of the wounds. For the dating of resin collection, we selected thirteen Korean red pines with resin wounds. For the investigation on the annual healing ability of the wounds, we sampled three dead trees out of 13 trees as disks. Through the comparison of the individual ring-width time series from the wounds with the local master chronology, it was verified that the resin collection was undertaken between the spring of 1962 and the autumn of 1975. The mean healing length of the wounds was 15.8 cm over the preceding 42 years, making their annual mean healing 0.38 cm. Through our study we successfully verified the healing ability of the wounded Korean red pines for the resin collection as well as the undocumented resin collection history.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.9
• /
• pp.1218-1223
• /
• 2012

${\varepsilon}$-Poly-$_L$-lysine (${\varepsilon}$-PL), produced by Streptomyces or Kitasatospora strains, is a homo-poly-amino acid of $_L$-lysine, which is used as a safe food preservative. The present study investigates the combined use of cell immobilization and in situ adsorption (ISA) to produce ${\varepsilon}$-PL in shaken flasks. Loofah sponge-immobilized Streptomyces ahygroscopicus GIM8 produced slightly more ${\varepsilon}$-PL than those immobilized on synthetic sponge, and sugarcane bagasse. Moreover, loofah sponge supported the maximum biomass. Hence, loofah sponge was chosen for cell immobilization. Meanwhile, the ion-exchange resin D152 was employed for ISA. The loofah sponge-immobilized cells produced $0.54{\pm}0.1g/l$ ${\varepsilon}$-PL, which significantly increased to $3.64{\pm}0.32g/l$ after combining with ISA through the addition of resin bags. The free cells with ISA using the dispersed resin yielded $2.73{\pm}0.26g/l$ of ${\varepsilon}$-PL, an increase from $0.82{\pm}0.08g/l$. These data illustrate that the proposed combination method improved production most significantly compared with either immobilization or ISA only. Moreover, the immobilized cells could be repeatedly used and an ${\varepsilon}$-PL total amount of $8.05{\pm}0.84g/l$ was obtained. The proposed combination method offers promising perspectives for ${\varepsilon}$-PL production.

• Journal of Power System Engineering
• /
• v.12 no.3
• /
• pp.55-59
• /
• 2008

In this paper, we have investigated on collection efficiency of fine particle of glass fiber-filter bag according to the surface treatment. The solution consisted of polytetrafluoroethylene(teflon), graphite powder, silicon resin and water was used as a basic surface treatment agent. Tensile strength of glass filter-bag increased with up to 3hrs and then decreased with surface treatment time. Tensile strength and initial modulus of the glass fiber-filter bag treated by iodine after basic surface treatment for 3hrs were lower than those of basic surface treatment for 3hrs, however collection efficiency and fracture strain were higher than those of basic surface treatment for 3hrs. Glass fiber-filter bag with lower initial modulus and more strain will be extend the durable period and the one treated by iodine after basic surface treatment 3or 3hrs is expected high collection efficiency of fine particle. This method makes it possible to manufacture glass fiber-filter bag of the optimum condition.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.183-187
• /
• 1999

The purpose of this study is providing basic data to control the air pollutants from solid waste incinerator. Incinerating the waste wood, the electrostatic precipitator had the best collection efficiency. The leather incineration had the same collection efficiency as synthetic resin incineration. And the coarse particle collection efficiency was high. As you know in correlation of leather incineration. pollutants produced a from incinerator are mostly fine particles. If the scrubber used only in the process produced a lot of fine particles. It is adequate to use the above control devices, together with high efficiency collector like bag-filter. To select the adequate control devices, it is required to investigate the size distribution before establishing control devices.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.3
• /
• pp.243-261
• /
• 2024

In this study, samples were collected from various ancient wooden shipwrecks, including the Shinan shipwreck and Jindo shipwreck that used iron nails, the Yeongheungdo shipwreck carrying iron artifacts, as well as the Sibidongpado shipwreck and Wando shipwreck where degradation products were not observed, all of which were salvaged by the National Research Institute of Maritime Heritage. The aim was to analyze the characteristics of degradation products generated by iron (Fe) within the salvaged wooden shipwreck materials and establish fundamental data on degradation products in waterlogged archaeological wood. The analysis revealed that sulfur (S) is generally accumulated in wood obtained from marine environments. It was observed that the content of inorganic substances such as iron and sulfur was significantly higher in the Shinan shipwreck, Jindo shipwreck, and Yeongheungdo shipwreck compared to Sibidongpado shipwreck and Wando shipwreck, which used wooden nails. This indicates that the presence of iron affects the accumulation of degradation products and suggests that iron is a factor in the corrosion of wood. Furthermore, crystallin compounds were observed within the cell walls, and higher concentrations of iron and sulfur were found in the resin ducts, rays, and radial tissues. This suggests that during desalination and consolidation treatments, warm water or polyethylene glycol (PEG) may move degradation factors into resincanals, rays, radial tissues, etc.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.387-394
• /
• 2012

Most of the libraries and archives that lacks conservation lab facilities, frequently apply common synthetic resin adhesives such as PVAc group(Pa), acrylic group(Ac) and PVP group(Pv) on simple repairs. The archival quality synthetic adhesive(Pa-1) that is used at the National Library of Korea and the common synthetic resin adhesives were selected for the experiments. Accelerated aging test was applied on the adhesive samples and change of the pH and chromaticity were measured for one month. As the result of the pH mesurments, Pa-1 and Ac-2 were at the acceptable pH range. As the result of the chromaticity mesurments, degree of yellowing(${\Delta}b^*$) showed smaller change to greater change in the following order; Pa-1

• Conservation Science in Museum
• /
• v.17
• /
• pp.85-100
• /
• 2016

The Bukji-ri Stone Pensive Bodhisattva of Bonghwa in the collection of Kyungpook National University Museum was transported to the National Museum of Korea for display in a special exhibition('Masterpieces of Early Buddhist Sculpture 100 BCE - 700 CE') and therefore underwent conservation ahead of the exhibition's start date. The stone sculpture had visibly encrusted surface dirt, granular disintegration and fissures upon arrival. Notably, a crack running obliquely across its lower half rendered the object unable to support its own weight without a pedestal, so one was created in order to maintain the sculpture in an upright position while on exhibition. The sculpture was further examined using a polarizing microscope and a stereoscopic microscope. SEM-EDS resulted in petrographic analysis of the stone's mineral composition and identification of its surface contaminants. Polarizing light microscopy confirmed biotite granite as the main mineral component of the object. Several urethane resins cast in round cross-sections were inserted into the newly made pedestal and stability tests were perform to measure the frictional force of the resins. An additional test was performed to compare urethane resin and epoxy resin, with results showing urethane to have a higher coefficient of friction. Utilizing a pedestal with urethane resin effectively ensured the stability of the Bukji-ri Stone Pensive Bodhisattva of Bonghwa during the aforementioned exhibition.

• Conservation Science in Museum
• /
• v.27
• /
• pp.67-90
• /
• 2022

A C-46 transport aircraft, which can be thought of as a large cultural heritage item from the modern period, was subjected to paint analysis and conservation treatment in preparation for its exhibition. The C-46 is the first aircraft ever dispatched to overseas combat zones by the Korean Air Force and carried out missions during the Vietnam War. The aircraft is mainly made of aluminum and shows signs of corrosion on its surface, including pitting and etching, as well as gray and white powdery attachments. In the analysis of the paint, diatomite(SiO₂·nH₂O) was confirmed in the red paint, titanium dioxide(TiO₂) was identified in the white paint, black iron oxide(Fe₃O₄) was detected in the black paint, and colcothar(Fe₃O₄) mixed with putty was confirmed in the blue paint. Infrared spectroscopy revealed the use of alkyd resin in the paint on the main body and nitrocellulose in the Taegeuk pattern. During the conservation treatment, mechanical cleaning, such as sanding, was conducted to remove paint and varnish from the surface. Corrosion was removed by sanding and cleaning with chemical solvents, and new paints and varnishes were applied. Through the paint analysis and conservation treatment, the aircraft was made available for exhibition in a stable condition.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.219-230
• /
• 2023

Marine waste is classified according to its location into coastal waste, floating waste, and submerged waste. As awareness of environmental issues increases, research on marine submerged waste in addition to visible trash is needed. In Korea, which is surrounded by the sea on three sides, this is a study on the distribution of marine sedimentary waste by type in the West Sea of Korea. Through the study, waste synthetic resin, scrap metal, waste tires, and others appeared in the order of large amounts. As a result showing the seriousness of waste synthetic resin among sediments deposited in the West Sea, it is expected to have a huge impact not only on the marine ecosystem but also on our lives in the near future. Through this study, it is judged that it will be helpful for future collection activities by recognizing marine submerged waste that was not known because it was invisible.

• 보존과학연구
• /
• s.6
• /
• pp.247-258
• /
• 1985

Conservation laboratory was attached to Keimyung University Museum inMarch 1980 and ever since it has been devoted mainly to the processing andconservation of metal objects. A number of objects have been processed inthis laboratory during the period, including those already in the collection ofthe Museum, those which were discovered during the three major excavationsof Kaya tombs conducted by the Museum, and those processed on commissionfrom other museums in the country,The activities of this laboratory include: (1) conserving the objects againstfurther erosion; (2) raising the archaeological value of the objects by revealingthe structure of such parts of the objects as concealed under rust; and (3)recovering the original shape of damaged objects.The methods adopted by the laboratory include: (1) removing from theobjects the ionized chlorine which usually are the major cause of erosion; (2)strengthening the objects by soaking them in acrylic resins; and (3) applyingresins to the surface of the objects to protect them from further erosion.Chemicals much employed by the laboratory includes the acrylic resin(Ruschot; developed jointly by the Cultural Property Research Institute ofKorea and Samwha Paint Company), the sodium sesquicarbonate, the sodiumhydroxide, the lithium hydroxide, and the benzotriazole.Major apparatus in the laboratory includes the vacuum immersion tank, theairbrasive, the ultrasonic cleaner, the pH-ion meter, the water bath, the zoomstereo microscope, the drying oven, and the drill.