• KSBB Journal
• /
• v.15 no.5
• /
• pp.489-496
• /
• 2000

Several culture systems including batch, two-stage CSTR, semi-fed batch, and two-stage cyclic fed-batch were investigated for the efficient production of the Fab fraction of PDC-E2 specific human monoclonal antibody using high cell density recombinant E. coli. A two-phase batch system and a two-stage continuous system were examined to overcome plasmid instability problems, by separating the growth and the production stages. The cell density and productivity of the two-stage continuous culture was better than that of the two-phase batch fermentation. In the two-stage continuous culture system with DO-stat, the cell growth and the productivity were superior to those of the system without the DO control. Also, almost total plasmid stability was maintained in the two-stage continuous culture system. Modified M9 medium was selected as an optimum feeding medium for the fed-batch process, and the optimum C/N ratio determined to be 2:3. The optimum feeding rate was $0.6g/\ell/hr$ for a constant feeding strategy in semi-fed batch system. When the feeding medium was fed by pulsing, it was observed that more frequent pulsing resulted in improved cell growth. The linear feeding method was the most efficient of the various feeding methods tested. Finally, high cell density culture using a two-stage cyclic fed batch system with pH-stat was tried because the linear feeding method showed limitations in terms of obtaining high cell densities, and a cell density of $54 g/\ell$ was achieved. It was concluded that the two-stage cyclic fed batch system was the most efficient system for high cell density culture of the systems tested. However, productivity improvements were lower than expected due to the extremely high accumulations of acetate, although the low levels of residual glucose were maintained.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.330-338
• /
• 2011

BACKGROUND: This study was conducted to investigate the agricultural product (Pulses, Lettuces, Pumpkins, Apples, Pears and Tangerines) in Korea, monitoring of cadmium (Cd) and lead (Pb) contaminations of agricultural products in cultivated areas and abandoned mine areas were investigated, and risk assessment was performed through dietary intake of agricultural products. METHODS AND RESULTS: The average contents of Cd and Pb ranged from 0.001 to 0.018 mg/kg and from 0.007 to 0.032 mg/kg respectively. The result was showed that contents of Cd and Pb did not exceed maximum residual levels established by CODEX except pumpkins and apples. The average daily intake were in the range of $1.06{\times}10^{-3}$ to $4.76{\times}10^{-2}{\mu}g/kg$ b.w./day at the mean and 95th percentile for Cd, $4.53{\times}10^{-3}$ to $8.35{\times}10^{-2}{\mu}g/kg$ b.w./day at the mean and 95th percentile for Pb for general population, based on the Korean public nutrition report 2008. The Hazard Index (HI) from the ratio analysis between daily exposure and safety level values was smaller than 1.0. CONCLUSION(s): This results demonstrated that human exposure to Cd and Pb through dietary intake of agricultural produces from abandoned mine areas might not cause adverse effect exceeding to those from non-contaminated areas.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.4
• /
• pp.687-714
• /
• 2009

In this paper, we study empirically the relations between financial constraints and dividend adjustment speed of innovative small and medium sized enterprises (SMEs) listed on Kosdaq Market of Korea Exchange. The main results of this study can be summarized as follows. Determinants suggested by the major theories of dividends, namely, residual dividend theory, dividend signaling theory, agency theory, catering theory, and transactions cost theory explain significantly the dividend payout policy of Kosdaq SMEs. Lintner's dividend adjustment model indicates that Kosdaq SMEs have long run target payout ratio, and that Kosdaq SMEs adjust partially the gap between actual and target payout ratio each year. In the core variables of Lintner (1956) dividend adjustment model, past DPS has more effect than current EPS. These results suggest that Kosdaq SMEs maintain stable dividend policy which maintain past DPS level without corporate special reasons. Dividend adjustment speed of innovative Kosdaq SMEs is more fast than that of uninnovative Kosdaq SMEs, and dividend adjustment speed of financial unconstrained innovative Kosdaq SMEs is faster than that of financial constrained innovative Kosdaq SMEs. Futhermore, dividend adjustment speed of innovative Kosdaq SMEs classified by Small and Medium Business Administration is faster than that of unclassified innovative Kosdaq SMEs. The former is linked with financial policies and services like credit guaranteed service, venture investment fund, insurance program, and so on. In conclusion, past DPS and current EPS suggested by the Lintner's dividend adjustment model explain mainly dividend adjustment speed, and financial constraints explain also partially. Therefore, if managers of innovative Kosdaq SMEs can properly understand of the effects of financial constraints on dividend smoothing, they can maintain constantly dividend policy. This is encouraging result for Korea government as it has implemented many policies to commit to innovative Kosdaq SMEs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.2
• /
• pp.181-189
• /
• 2021

Purpose: The purpose of this study is to investigate the stress response and sleep state of the new patients who visit the hospital for prosthodontic treatment due to tooth loss to make reference to further treatment direction. Materials and methods: Examinations, consultations, and surveys were conducted on 236 patients (94 males, 142 females, and 24-86 years old), who newly registered at the department of prosthodontics at Pusan national university hospital, for 2 years from 2018. The number of remaining teeth, edentulous arch, possibility of mastication, and future prosthetic treatment directions were recorded. The visual analogue scale (VAS), stress response inventory (SRI) and Insomnia severity index (ISI) were used as tools to measure patient's subjective discomfort, stress response, and sleep status. Results: Among the entire prosthodontic patient group, the average value of 'fatigue' was significantly higher among the 7 items of SRI, and the value of 'aggression' was significantly lower (P<.001). There are a significant difference between the edentulous and full dentition in the oral discomfort value measured by VAS (P=.004). In cases where less than 20 teeth remain, mastication is impossible, and patients who are planning treatment with removable prostheses, VAS value and 'depression' and 'fatigue' values in SRI were higher than those in the reverse case (P<.05). The patients showed severe level in VAS value have high value of 'tension', 'somatization', 'depression', 'fatigue'and 'frustration'in SRI than non-serious patients (P<.05). Clinical insomnia occurred in 11.4% of all patients, and women had significantly lower sleep quality than men (P=.044). Patients with insomnia showed significantly higher scores on the VAS value and all 7 SRI items than those of normal sleepers (P<.05). Conclusion: The new prosthetics had high 'fatigue' value among the 7 items of SRI. The oral condition, number of residual teeth and mastication function and clinical insomnia affected oral discomfort and the stress response.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.333-344
• /
• 2022

The quarrying and utilization of natural building stones such as granite and marble are rapidly emerging in developing countries. A huge amount of wastes is being generated during the processing, cutting and sizing of these stones to make them useable. These wastes are disposed of in the open environment and the toxic nature of these wastes negatively affects the environment and human health. The growth trend in the world stone industry was confirmed in output for 2019, increasing more than one percent and reaching a new peak of some 155 million tons, excluding quarry discards. Per-capita stone use rose to 268 square meters per thousand persons (m²/1,000 inh), from 266 the previous year and 177 in 2001. However, we have to take into consideration that the world's gross quarrying production was about 316 million tons (100%) in 2019; about 53% of that amount, however, is regarded as quarrying waste. With regards to the stone processing stage, we have noticed that the world production has reached 91.15 million tons (29%), and consequently this means that 63.35 million tons of stone-processing scraps is produced. Therefore, we can say that, on a global level, if the quantity of material extracted in the quarry is 100%, the total percentage of waste is about 71%. This raises a substantial problem from the environmental, economical and social point of view. There are essentially three ways of dealing with inorganic waste, namely, reuse, recycling, or disposal in landfills. Reuse and recycling are the preferred waste management methods that consider environmental sustainability and the opportunity to generate important economic returns. Although there are many possible applications for stone waste, they can be summarized into three main general applications, namely, fillers for binders, ceramic formulations, and environmental applications. The use of residual sludge for substrate production seems to be highly promising: the substrate can be used for quarry rehabilitation and in the rehabilitation of industrial sites. This new product (artificial soil) could be included in the list of the materials to use in addition to topsoil for civil works, railway embankments roundabouts and stone sludge wastes could be used for the neutralization of acidic soil to increase the yield. Stone waste is also possible to find several examples of studies for the recovery of mineral residues, including the extraction of metallic elements, and mineral components, the production of construction raw materials, power generation, building materials, and gas and water treatment.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.534-539
• /
• 2006

In the ozone disinfection unit process of a piston type batch reactor with continuous ozone analysis using a flow injection analysis (FIA) system, the CT values for 1 log inactivation of Cryptosporidium parvum by viability assays of DAPI/PI and excystation were $1.8{\sim}2.2\;mg/L{\cdot}min$ at $25^{\circ}C$ and $9.1mg/L{\cdot}min$ at $5^{\circ}C$, respectively. At the low temperature, ozone requirement rises $4{\sim}5$ times higher in order to achieve the same level of disinfection at room temperature. In a 40 L scale pilot plant with continuous flow and constant 5 minutes retention time, disinfection effects were evaluated using excystation, DAPI/PI, and cell infection method at the same time. About 0.2 log inactivation of Cryptosporidium by DAPI/PI and excystation assay, and 1.2 log inactivation by cell infectivity assay were estimated, respectively, at the CT value of about $8mg/L{\cdot}min$. The difference between DAPI/PI and excystation assay was not significant in evaluating CT values of Cryptosporidium by ozone in both experiment of the piston and the pilot reactors. However, there was significant difference between viability assay based on the intact cell wall structure and function and infectivity assay based on the developing oocysts to sporozoites and merozoites in the pilot study. The stage of development should be more sensitive to ozone oxidation than cell wall intactness of oocysts. The difference of CT values estimated by viability assay between two studies may partly come from underestimation of the residual ozone concentration due to the manual monitoring in the pilot study, or the difference of the reactor scale (50 mL vs 40 L) and types (batch vs continuous). Adequate If value to disinfect 1 and 2 log scale of Cryptosporidium in UV irradiation process was 25 $mWs/cm^2$ and 50 $mWs/cm^2$, respectively, at $25^{\circ}C$ by DAPI/PI. At $5^{\circ}C$, 40 $mWs/cm^2$ was required for disinfecting 1 log Cryptosporidium, and 80 $mWs/cm^2$ for disinfecting 2 log Cryptosporidium. It was thought that about 60% increase of If value requirement to compensate for the $20^{\circ}C$ decrease in temperature was due to the low voltage low output lamp letting weaker UV rays occur at lower temperatures.

• Journal of Food Hygiene and Safety
• /
• v.23 no.3
• /
• pp.239-247
• /
• 2008

Objective of this study was to investigate residual the levels of heavy metals in rice grain and soils of "Top-Rice" and common rice cultivation areas from 2005 to 2007. Soil and rice grain samples were taken from 33 "Top-rice" areas and neighboring paddies, and analyzed for the elements using ICP-OES and ICP-TOF-MS after acid digestion. A concentration of arsenic in paddy soil was 1.33 mg/kg which was below 1/5-1/11 fold of the threshold levels(concern: 4 mg/kg, action: 10 mg/kg), and paddy soil was 0.06 mg/kg of Cd(cadmium) being below 1/25-1/67 fold of the limits(concern: 1.5 mg/kg, action: 4 mg/kg). A level of Cu(copper) in paddy soil was 4.57 mg/kg which was below 1/11-1/27 fold of the threshold levels(concern: 50 mg/kg, action: 125 mg/kg), and Pb(lead) concentration in paddy soil was found to be a 4.68 mg/kg. In addition, Hg(mercury) concentration in paddy soil was to be a 0.03 mg/kg, which was below 1/131-1/328 fold of the threshold levels(concern: 4 mg/kg, action: 10 mg/kg). The average concentrations of As, Cd, Cu, Pb and Hg in the polished rice samples were 0.037, 0.043, 0.280, 0.048 and 0.002 mg/kg, respectively. These levels are lower than those of other countries in rice grains. Assuming the rice consumption of 205.7 g/day by total dietary supplements in Korea, the amount of total weekly metal intake of As, Cd, Cu, Pb and Hg by polished rice were estimated to be 0.0892, 1.035, 6.712, 1.161 and 0.054 ${\mu}g/kg$ body weigh/week, respectively. The PTWI(%) of As, Cd, Cu, Pb and Hg were 5.95(inorganic arsenic), 0.26(total arsenic), 14.79, 0.19, 4.65 and 1.07% estimated to be 0.0892, 1.035, 6.712, 1.161 and 0.054 ${\mu}g/kg$ body weigh/week, respectively. In conclusion, it was appeared that the heavy metals contamination in the brown and polished rice should not be worried in Korea.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.1
• /
• pp.6-15
• /
• 1993

Background: Positive end, expiratory pressure (PEEP) has become one of the standard therapies for adult respiratory distress syndrome (ARDS). Total static compliance has been proposed as a guide to determine the size of PEEP ('best PEEP') which is of unproven clinical benefit and remains controversial. Besides increasing functional residual capacity and thus improving oxygenation, PEEP stimulate prostacyclin secretion and was proposed for the treatment of acute pulmonary embolism. But little is known about the effect of PEEP on hemodynamic and gas exchange disturbances in acute pulmonary embolism. Methods: To study the validity of total static compliance as a predictor of 'best PEEP' in ARDS and acute pulmonary embolism, experimental ARDS was induced in mongrel dog with oleic acid and acute pulmonary embolism with autologous blood clot. Then hemodynamic and gas exchange parameters were measured with serial increment of PEEP. Results:In ARDS group, total static compliance and oxygen transport were maximal at 5 cm$H_2O$, and decreased thereafter (p<0.05). With increment of PEEP, arterial oxygen tension ($PaO_2$) and arterial carbon dioxide tension ($PaCO_2$) increased and cardiac output and physiological shunt decreased. In pulmonary embolism group, total static compliance, oxygen transport, physiological shunt and cardiac output decreased and $PaO_2$ and $PaCO_2$ increased with increment of PEEP (p<0.05). Comparing the change induced by increment of PEEP by 1 cm$H_2O$ in ARDS group with that in pulmonary embolism group, there was no significant difference between two groups except cardiac output which decreased more in pulmonary embolism group (p<0.05). In ARDS group, oxygen transport and total static compliance increased after PEEP application, and total static compliance was maximal at the PEEP level where oxygen transport was maximal. However in pulmonary embolism group, oxygen transport and total static compliance decreased after application of PEEP. There was significant correlation between change of total static compliance and change of oxygen transport in both groups. Conclusion: In both ARDS and acute pulmonary embolism, it can be concluded that total static compliance is useful as a predictor of 'best PEEP'.

• The Korean Journal of Pesticide Science
• /
• v.18 no.3
• /
• pp.130-140
• /
• 2014

Recently, some of the previous studies reported that tolclofos-methyl is still exist in ginseng cultivated soil, even though it is has been banned for ginseng. Therefore, the current study was aimed to examine the levels of absorption and translocation of tolclofos-methyl from ginseng cultivated soil to ginseng root and leaf stem for the period of 1 year. For this study, ginseng plants were transplanted in pots and treated with $5.0mg\;kg^{-1}$ of tolclofos-methyl (50% WP). At the end of each interval periods (every three months) the samples (soil, roots and leaf stems) were collected and analyzed the absorption and translocation levels of tolclofos-methyl using gas chromatography and mass spectrometry (GC-MS). The limit of quantitation of tolclofos-methyl was found to be $0.02mg\;kg^{-1}$ and 70.0~120.0% recovery was obtained with coefficient of variation of less than 10% regardless of sample types. In this study, a considerable amount of translocation of tolclofos-methyl residues were found in soil (4.28 to $0.06mg\;kg^{-1}$), root (7.09 to $1.54mg\;kg^{-1}$) and leaf stem (0.79 to $0.69mg\;kg^{-1}$). The results show that the tolclofos-methyl was absorbted and translocated from ginseng cultivated soil to ginseng root and ginseng leaf stem and found to be decreased time-coursely. Secondly, we were also analyzed soil, root and leaf stems samples from Hongcheon, Cheorwon, Punggi and Geumsan by GC-MS/MS (172 pesticides), LC-MS/MS (74 pesticides). In this study, 43 different pesticides were detected ($0.01{\sim}7.56mg\;kg^{-1}$) in soil, root and leaf stem. Further, tolclofos-methyl was detected 4 times separately in root sample alone which is less ($0.01{\sim}0.05mg\;kg^{-1}$) than their maximum residual limit (MRL) in ginseng. Consequently, the results from both studies indicate the residues of tolclofos-methyl found in ginseng cultivated soil and ginseng ensuring their safety level. Moreover, long-term evaluations are needed in order to protect the soil as well as ginseng free from tolclofos-methyl residues.